JWLABS LiveWires 2.0 Operating Instructions

Welcome to the JWLABS Rife Machine community!

Welcome to the Global Community of JWLABS Rife Machine Users!

Our instruments transform audio frequencies into electrical output, producing a tingling sensation at the point of contact. This electrical stimulation can be experienced through specially tuned sessions or your favorite music, offering a unique whole-body experience via our Tactio® feature.

JWLABS Machines are media adapters that function as transducers, converting audio frequencies, including music, into electrical impulses that the user perceives as gentle vibrations or a tingling sensation. These instruments are intended for general well-being and entertainment purposes and are not FDA-certified medical devices.

Discover why our customers routinely use our machines to improve, preserve, and protect their well-being. Frequency matters... Change Your Tune!

Warnings

Consult your physician before beginning use of the device.
DO NOT use this device if you have a pacemaker, defibrillator, or other implanted electronic device.
DO NOT use the device on children under 18 years old without adult supervision.
DO NOT use the device near water.
DO NOT plug electrode wires into an electrical outlet.
DO NOT place electrodes on areas of the body other than the palms of the hands or soles of the feet, as this may cause skin irritation, injury, or burns.
DO NOT apply electrodes over the heart or above the neck, as this could cause serious injury.
DO NOT engage in any use of the device not expressly stated in our material. The user accepts full responsibility for any consequences, including serious physical injury, resulting from using the device for purposes other than entertainment.
If you experience any sensation of pain, burning, skin irritation, or shock, stop using the device immediately, turn it off, and seek medical advice if necessary.

JWLABS devices are Media Adapters intended for General Wellness and Entertainment purposes only. These are not FDA certified medical devices.

Cautions

Read all instructions carefully before beginning use.
Turn the amplitude dial fully down at the end of each track to ensure a minimized amplitude at the start of each session. This allows for adjustments to connections, track selection, or device power.
Limit use to the duration of the General Alignment (G.A.) session, approximately 90 minutes. Longer sessions may result in fatigue or headache. Drink plenty of water before, during, and after sessions. If headache or fatigue persists for more than two hours, consult your physician.
Before each use, check the device to ensure all components are intact and wires are not frayed. Do NOT use the device if wires are frayed or damaged, as this may result in shock or no output.

Maintenance

Clean your device with a soft cloth. Do NOT apply cleaning agents to the instrument.
To ensure proper conductivity, check electrode pins for discoloration. A fine emery board or sandpaper can prevent residue accumulation on the electrode pins.
Recharge the battery after each G.A. session. Expect approximately two hours of continual use per charge.

Take an Inventory

Verify that your shipment is complete by comparing contents with the packing slip. If anything is missing or appears damaged, contact JWLABS immediately. Save all packing materials.

Package includes:

LiveWires 2.0 Rife Machine
20-pack of adhesive electrode patches
Charging cable
One removable 6-ft electrode wire
Input cable (for streaming frequencies from an outside source)

Find additional supplies at jwlabs.com.

Features:

Palm-size plastic enclosure
Measures 5 inches x 2 1/2 inches
Extended General Alignment session on board (spans 3 Hz to 10,000 Hz)
Five LEDs corresponding to the tracks of General Alignment
Thumbwheel for adjusting amplitude (signal intensity)
Rechargeable battery
Maximum power: 80 volts
Advanced Frequency sessions available via streaming from JWLABS website or for download on Flash Drive from our store.
3-year warranty

General Background

JWLABS has been producing products based on Rife technology since 1987. Originally built by hand, our devices are now assembled in state-of-the-art factories in the US. We remain committed to the original analog signal, which audiophiles appreciate for its natural, full-bodied output compared to digital creations. This means that with each frequency delivered, the harmonics around that number are also produced.

The timeline below illustrates the evolution of JWLABS Rife Machines:

1987: Model B2.1
1992: Model B16
1994: Model B27.1
1997: Model B27.6
1998: Model B27 v.3.5
2003: Model B27
2004: Model A3
2014: Live Wires
2017: Model A4
2019: Model A3.3
2022: Model A4.1
2025: LiveWires 2.0

The Basics of JWLABS Rife Technology

Our strategy focuses on expert frequency tuning within the lower end of the audio range. While many reference targeted frequencies for specific health conditions, JWLABS does not make or imply such claims. Our frequency sessions concentrate on key numbers, utilizing sophisticated tuning techniques like sweeping (upward and downward) and dithering. These techniques, combined with the original analog source, provide a carefully composed and expertly tuned electro-stimulation experience.

Our devices deliver frequencies safely within the lower audio range (up to 10,000 Hz). Each session is expertly tuned, offering unique frequency sequences for each application.

Our devices are designed for individuals who prefer a user-friendly format to enhance their General Wellness, rather than delving into the intricate details of Rife technology. Our recorded sessions are akin to music, hand-tuned and played with skill. The user's needs and preferences are anticipated in each recording, requiring little to no prior education for a satisfying experience.

All sessions are created on the JWLABS Model B27 analog instrument. The energy used is a balanced volts/amps electrical current that feels comfortable to the user. Our specialized tuning allows users to explore variations in sessions, including emphasis on specific frequencies and ranges.

Each title is masterfully tuned with exact traditional frequencies known to be helpful for thousands of users, offering both general and specific emphasis for a comprehensive session.

Users may prefer to feel the energy on their palms or the soles of their feet, with each approach offering a different sensation and potentially serving a different purpose.

Basic Instructions

Our General Alignment Rife Session - Where Everyone Begins

We recommend starting conservatively with a ten-minute session on the General Alignment title. This applies even to those who have used other Rife machines or have taken a break from their sessions.

Allow your body to acclimate before gradually increasing session time to include the entire G.A. session, thereby expanding the frequency range. This session is also excellent for routine maintenance for experienced users. Healthy individuals should be able to progress smoothly through the tracks of the General Alignment (GA) session.

With the exception of the General Alignment recording, the frequency range for each channel on the Model B corresponds to the four tracks of each session title as follows:

A = Track 1, delivering 3 to 33 Hz
B = Track 2, delivering 33 to 333 Hz
C = Track 3, delivering 333 to 3333 Hz
D = Track 4, delivering 3300 to 10,000 Hz

Our Rife sessions are divided into tracks, with lower frequencies in the initial tracks and higher frequencies in the later tracks. You may notice a different sensation on each track at the point of contact. Most users begin with Track 2 for no more than 10 minutes per day, five days a week, with two days off. This is a ten-minute track. Exceptions may apply; contact JWLABS for further discussion.

Start each track before increasing Amplitude. This will avoid any sensation of a sudden burst of output.

Note: The amplitude dial on LiveWires is a one-turn thumbwheel. One full turn delivers maximum output. Keep your thumb on the wheel throughout the session, as adjustments to signal intensity may be needed. Maintain an amplitude level that is comfortable for you; higher output is not necessary to experience the effects.

Preparing for Your Session

CAUTION: Ensure your LiveWires is powered off and the amplitude is in the power-down position before beginning to avoid a sudden burst of output.

BEGINNERS: Use only the General Alignment (GA) session.

Separate the red (positive) and white (negative) ends of your electrode wires to about 12 inches. Insert the pins on the ends of the wires into the pigtail on the electrode patches.
Place the electrode patch with the red lead wire (positive) onto your right palm and the electrode patch with the white lead wire (negative) onto your left palm.
Press the POWER button on your LiveWires device unit.
Select TRACK 2.
With the amplitude turned down and electrode patches in place, press PLAY to begin. (We recommend starting with TRACK 2, as TRACK 1 can be more intense.)
Turn the AMPLITUDE thumbwheel clockwise to a level that is COMFORTABLY STRONG. It is normal to tolerate more amplitude on higher tracks.
Turn the AMPLITUDE all the way down when pausing during a session or between tracks.
At the end of your session, turn the AMPLITUDE all the way down and turn the device off.
Remove electrode patches from your palms and place them back onto the provided plastic shield to protect them and prolong their life. Remove electrode wires from the unit and store them carefully.
Build your session time and the range of frequencies addressed at a pace appropriate for you, considering any minor reactions.

Outline of General Alignment (GA) Session

Track 1 - Delivers 2 - 33 Hz (23 minute sweep): These frequencies are very slow, some slower than brain waves in a waking state, which can induce calmness. We recommend adding this track to your routine only after progressing through tracks 2-5.
Track 2 - Delivers 33 - 404 Hz (10 minute sweep): These frequencies are in the lower end of the range addressed. This is where beginners initiate their exploration.
Track 3 - Delivers 383 - 700 Hz (17 minute sweep): These mid-range frequencies offer a noticeably different feel compared to the lower range.
Track 4 - Delivers 680 - 4,000 Hz (20 minute sweep): These higher mid-range frequencies may encourage you to increase amplitude. It is acceptable to turn the amplitude up to a level that feels "comfortably strong."
Track 5 - Delivers 3300 - 10,000 Hz (15 minute sweep): These higher frequencies may feel more subtle. It is possible you may not perceive the highest frequencies, which is normal and does not indicate a lack of current flow.

JWLABS Library of Frequency Sessions

After completing the General Alignment session, explore our library of sessions. Access them by subscribing to our streaming service or ordering packages for download or on Flash Drives.

How to Stream Frequency Sessions Via a Computer or Tablet

Connect the INPUT CABLE to the input jack on your LiveWires device and the HEADPHONE JACK on your computer or tablet.
Ensure the VOLUME on your computer or tablet is at MAXIMUM for effective signal reception and conversion to electrical stimulation.
Navigate tracks via your computer or tablet screen, not the LiveWires device.
Turn down the amplitude at the end of each track to avoid sudden jolts when starting a new track.
For the LiveWires Start-up video, click HERE (Coming Soon).
For further discussion of the General Alignment, click HERE (Password Protected).

Supplies

You may need to re-order supplies for your Wright Laboratories frequency instrument from time to time. Please click here for a complete list of supplies.

Do You Have More Questions?

Email us at info@jwlabs.com

Or call us at 888.891.1122 or 708.356.6513 (We're on Central time.)