Manuals+

JWLABS Model A Instruction Manuals

Welcome to the global community of JWLABS Model A users!

You have acquired a device that is the instrument of choice for people who understand the value of applying microcurrent to the body. Our instruments transform audio frequencies to electrical output which produces a tingling sensation at the place of contact. This electrical stimulation can be acquired from our specially tuned sessions or from your favorite music. Explore the sensations of our Tactio® feature which makes music a whole body experience!

JWLABS Machines are media adapters that act as transducers, which convert audio frequencies, including music, to electrical impulses the user feels as gentle vibrations or a tingling sensation.

Our instruments are not FDA certified medical devices. We offer them only for general well being and entertainment purposes.

Once you experience our Rife technology you will appreciate why our customers use our machines routinely to improve, preserve and protect their well being.

Frequency matters... Change Your Tune!

Watch our video on How To Use Your JWLABS A3.3 Rife Machine.

Watch our video on How To Use Your JWLABS A4.0 Rife Machine.

Disclaimer

JWLABS Machines are media adapters that act as transducers, converting audio frequencies such as the sound of music to electrical impulses which the user feels as gentle vibrations or a tingling sensation. The JWLABS Machines are not designed to nor do we intend that they will exercise any structure-function effect on the user.

These are not FDA certified medical devices and we offer them only for general well being and entertainment purposes.

Warranty

Customer understands and agrees that in the event of a failure of the device, JWLABS reserves the right to repair or replace the device with another. JWLABS may replace the device with any instrument of their choosing of greater or lesser value than the original, until such time as the defective device can be permanently replaced or repaired. In no case will repaired or replacement devices be shipped to the Customer until any loaned device in the Customer's possession is returned in good condition. JWLABS reserves the right to assess damage to any device it has made for Customer, to determine if the device has been damaged due to negligence on the part of the Customer. JWLABS assessment of damage will be final, and if the Customer is found negligent, JWLABS reserves the right to collect money for the repair or replacement from the Customer, prior to the replacement or repaired device being shipped to the Customer.

Warranty extends only to the innards of the Model A. It does not include wires or other accessories. It does not include the re-chargeable battery which is located on board. The battery can be replaced for cost at our factory.

PLEASE NOTE: Do NOT attempt to open the top or bottom of the device. Any indication that this has been attempted will void the warranty in its entirety.

Wright Laboratories, LLC
205 E. Butterfield Road, Suite 227, Elmhurst, IL 60126
888.891.1122 • 708.356.6513 • info@jwlabs.com

©2020 Wright Laboratories, LLC

Warnings

If the user feels any sensation of pain, burning, skin irritation, or shock stop using the device immediately and turn it off. Seek medical advice if necessary.

Cautions

Read all instructions carefully before beginning use.

Turn the amplitude dial all the way down (counter clockwise) at the end of each music selection, ensuring that you begin each new track with the amplitude minimized. In this position, you can make adjustments to your connections, to your track selection, or turn your device on or off.

We recommend limiting the use of the device to an hour. 60 minutes is the recommended maximum duration of a session. Usage beyond 60 minutes a session could result in temporary feelings of fatigue or headache. If headache or fatigue persists for more than two hours, consult with your physician.

Check the device before each use to make sure all components are intact and that no wires are frayed. Do NOT use device if wires are frayed or damaged. Doing so may result in a shock, or no output at all.

When using the machine with two people at a time, be sure the person who feels the current first is in charge of the amplitude setting.

JWLABS devices are Media Adapters intended for General Wellness and Entertainment purposes only. They are not FDA-certified medical devices.

Maintenance

Clean your device with a soft cloth. Do NOT apply cleaning agents to the instrument.

Store your device with the case closed to protect the inner components.

Check your electrode pins for carbon build up before each use. The carbon build up could interfere with the conductivity and could cause no output or intermittent output, which the user may experience as a shocking sensation. A fine emery board or sandpaper will prevent residue accumulation on the electrode pins.

DO NOT let the battery drain below 50% or the device may not work properly.

Take an Inventory

First, take a moment to inventory what you have received. Compare the contents with the packing slip to verify that your shipment is complete. If anything is missing or appears damaged, contact Wright Laboratories, LLC immediately. Save all packing materials.

Your Model A Start Up Kit Consists of the Following:

Outside Features

Your Model A is approximately 4" x 6" x 2" and weighs around one pound. The Model A is built into an extremely durable, crush-proof, water-resistant enclosure. Just below the clasp is a little burp valve that automatically releases the air pressure inside so you can close the case. When closed, your Model A is very secure.

General Background

JWLABS has been producing products since 1987 which are based on the long history of Rife technology. Originally built by hand in their workshop, JWLABS devices have long been assembled in state-of-the-art factories in the US. They have stayed true to their commitment to the original analog signal. Audiophiles appreciate the significance of this, in that the output is more natural, full bodied than those created digitally. This means that with each frequency JWLABS delivers, the harmonics around that number are produced. JWLABS instruments are designed to provide the ability to play frequencies from an outside source, including music. This feature delivers a thrilling experience of tactile music, and provides entertainment value which is unique to JWLABS devices. JWLABS calls this feature Tactio®. You may also play specifically tuned frequencies from an outside source through your Model A.

The history of JWLABS Rife machines includes models such as:

The Basics of JWLABS Rife Technology

JWLABS' basic strategy has always been to provide expert frequency tuning throughout the lower end of the audio range. Though many have referenced targeted frequencies for specific health conditions, JWLABS does not make or imply such claims. Each of JWLABS frequency sessions provides concentration on certain key numbers, accompanied by sophisticated tuning techniques such as sweeping (both upward and downward) and dithering. These techniques, coupled with the original analog source of JWLABS sessions, provide a carefully composed and expertly tuned experience of electro-stimulation.

JWLABS devices are intended to appeal to people who are not interested in learning the intricate details of Rife technology, but prefer a research-based user-friendly format which is designed to enhance their General Wellness.

JWLABS' recorded sessions are a form of music. They are hand-tuned and played with skill, much like any musical instrument is played while music is recorded. The needs and preferences of the user are anticipated in the contents of each recording, or score. Satisfaction of your experience can be realized with little or no education required.

JWLABS has prepared numerous sessions for you to explore, and you may also relish the Tactio® experience which involves playing your favorite music through your machine rather than utilizing JWLABS' specialized sessions. This allows you to feel the frequencies of your music - a unique and multidimensional experience. You are in for a treat!

All of JWLABS' sessions are created on JWLABS Model B27, the analog instrument, and are recorded by channels A, B, C and D. The energy JWLABS machines use is a volts/amps electrical current, balanced in a way that feels good to the user. With JWLABS' specialized tuning, you will have the confidence and freedom to explore numerous variations in your sessions, including emphasis on certain frequencies (and ranges of frequencies).

Some people prefer to feel the energy on their palms, others choose to apply the electrodes to the soles of their feet. Each approach will produce a variation in sensation.

With the exception of the General Alignment recording, the frequency range for each channel used from the Model B always corresponds to the four tracks of each session title as follows:

Each title is masterfully tuned throughout these ranges with specific sets of exact traditional frequencies, which have been known to be helpful for thousands of users. JWLABS' tuning is both general and specific in emphasis, ensuring that you have a comprehensive session.

Basic Instructions

JWLABS recommends that you begin your exploration conservatively, say with a ten - fifteen minute session. (This is true even for folks who have used other Rife machines.) Allow your body to get used to the experience before gradually building up your time to about an hour.

Our General Alignment Rife session is where everyone begins.

It's ideal for beginners AND for folks re-starting on their machine after a lengthy furlough. This session is also excellent for routine maintenance. The healthy person will be able to move consistently through the tracks of the General Alignment (GA) session smoothly.

Our Rife sessions are divided into tracks. The lower tracks deliver the lower frequencies, moving higher as you go up in tracks, the highest being the last track of a given session. You will note a different sensation on each track at the place of contact (usually palms and/or soles of feet).

Most users will begin with Track 2 for not more than 10 minutes per day, five days in a row, taking two days off each week. (In certain circumstances, the user will begin with Track 5 (please call JWLABS for more information). This is a five minute track.

Start each track before increasing Amplitude. This will avoid any sensation of a sudden burst of output.

Begin as follows:

You will note that the frequencies on the lower tracks are quite slow. They have a more pronounced "beat" and you will prefer to have the amplitude lower than on the other tracks. This is perfectly normal. The final track of any recording, on the other hand, is composed of much higher frequencies which require more power. You will notice a desire to intensify the amplitude accordingly.

Set the amplitude to your comfort level. Feel free to adjust it at any time, given the range of frequencies you are using. You may wish to make adjustments to the amplitude, especially when you are using Music as the source of your frequencies. Each instrument has a different "voice" and each type of music has a different rhythm. The nature of your music selection may prompt you to adjust the amplitude higher or lower as you progress through each musical selection. This is normal.

Preparing for Your Session

CAUTION: Make sure your Model A is powered off and the amplitude is in the power down position before beginning these steps.

BEGINNERS will use only the General Alignment (GA) session.

  1. Ensure that the polarity switch is in the positive position. (This indicates that your red tipped electrode wire is positive.)
  2. Separate the red and white ends of your electrode wires to about 12 inches. Insert the pins on the ends of the wires into the port on the electrode patches. Place the electrode patch with the red lead wire (indicating positive) onto your right palm and the electrode patch with the white lead wire (indicating negative) onto your left palm.
  3. Power on your Model A unit. Press the home screen to bring up the main menu. Select GA Tracks (General Alignment, located in the lower right corner), then select TRACK 2.
  4. With the amplitude turned down and the electrode patches in place on your palms, press PLAY to begin your session. (JWLABS recommends beginning with TRACK 2 because TRACK 1 is more intense.)
  5. Turn the AMPLITUDE clockwise to a level that is COMFORTABLY STRONG, but not more than four to five turns. This guidance generally applies to the lower tracks of any of the recordings. It's normal to tolerate more amplitude on the higher tracks. Turn the AMPLITUDE all the way down if you pause during a session as well as between the tracks of your session.
  6. At the end of your session, turn the AMPLITUDE all the way down (counter clockwise). Turn the machine off.
  7. Remove electrode patches from your palms and place them back onto the plastic shield provided. This will protect the patches and help them last longer. Remove all replaceable wires from your unit and close the case.
  8. If you would like to use the Tactio® feature, insert one end of the Input Cable into the jack marked "Input" and the other end of the Input cable into the headphone jack of your media source.

Outline of General Alignment (GA) Session

What Is Tactio®?

John Wright conceived Tactio® very early in his career of developing Rife machines. He understood that the safest range of frequencies is in the audio range, and he designed his early instruments with an audio jack, making it possible to record the hand-tuned frequency sessions in real time. He knew that the potential for tactile music was promising.

Do you love music? This will take your enjoyment to a whole new level. The thrill of listening to your favorite music and feeling the electron flow that these selections produce is second to none. JWLABS devices have gone through many renditions, and JWLABS is proud to offer this safe and exhilarating experience to its customers.

What you will need:

Simply plug your input cable into the device you're using to play your music. Attach your headset to the Tactio® jack and set up your electrodes for a regular Rife session. Be prepared to adjust the amplitude as the music intensifies or becomes more subdued. The display on your Model A4 will say "Tactio® mode" when you are streaming music or any other audio signal through your machine.

Tactio® will bring you hours of entertainment and will provide an entirely new way for you to introduce your friends and family to Rife technology.

It's fun, it's energizing. Put a new level of vibrancy in your life!

Troubleshooting

Problem: Irritation of skin at site of electrode placement.

With continued use, the adhesive on the patches degrades and may interfere with the quality of your contact. REPLACE THE PATCHES WITH NEW ONES.

With continued use, the pins on the ends of the electrode wires may become blackened from carbon build-up from the patches. USE A FINE EMERY BOARD OR SANDPAPER TO CLEAN PINS.

Typically, JWLABS' users are placing electrodes on the palms or the soles of the feet. The skin at these locations is more robust than other delicate areas. Some people are more sensitive than others, so JWLABS suggests that you REPOSITION THE PATCHES EVERY TEN MINUTES OR SO. (Pause the recorded sessions and turn the amplitude all the way down before doing this.)

Problem: No green activity light

In the A4, a failed activity light indicates that the upper section of the device is not communicating with the lower section. It's likely that the ribbon cable has become detached, and the machine will have to be repaired at the factory.

For the A3, be sure that the volume of your media player is at maximum. Computers, phones and other media devices have several places for volume adjustment.

Problem: Not feeling current/No output.

First, make sure your activity light is illuminated to bright green. If not, be sure that the volume of your media player is at maximum. If it is, check your connection at the electrode jack. Check that the connections of electrode wires are firmly in place.

If you can't feel the current on a higher frequency, try turning up the amplitude. It's normal to require more power on the higher frequencies, which are on the higher tracks. Some people will not feel it at this level, others do. Both are normal.

Check the pins on ends of the wires, and make sure they aren't darkened from use. If they are, you can easily clean them using an emery board or fine sandpaper.

Test your other set of wires. The tiny copper wires inside the cable may be broken. If so, it's time to order a replacement set.

Another possibility is that there is a break in one or more of the very fine wires that compose the electrode wires. In this case, they will have to be replaced.

Supplies

In the course of using your Wright Laboratories frequency instrument, you will need to re-order supplies from time to time. Please go to https://jwlabs.com for a complete list of supplies.

Getting to Know Your Model A3.3 and A4.0

(This information is for both the Model A3.3 and Model A4.0)

Power Switch

This dome switch (the raised button located in the upper left corner) is illustrated with the universal symbol for power. [power symbol] A red LED illuminates the center of the button. When the power is first turned on, the green ACTIVITY light will illuminate briefly. It will remain darkened until your frequencies are playing.

Charging the Battery

Make sure the power switch is turned OFF while charging the battery. You may charge the battery via the USB cable with the adapter provided or plugged into your computer.

Please Note: charging will be completed much faster when using the power supply in the wall. A yellow LED will indicate that the battery is charging. When charging is complete, the LED will go dark. Expect approximately five hours of use before needing a new charge.

Do NOT fully discharge the battery. For A4.0 users, JWLABS recommends re-charging when the battery icon indicates that 50% of power or less remains. JWLABS engineers advise that the battery likes to be topped off.

Input Jack

This port allows you to provide the frequency input from an outside source. You will use this to connect one end of your input cable. The other end goes to the headphone jack on your CD player, computer, tablet, or smartphone. This is how the Music gets to your machine, providing the tactile experience. When using this feature on the Model A4.0, the screen will indicate “Tactio® mode”.

Headphone (TACTIO®) Jack

This port allows you to listen to the music you have selected. Be sure to use headphones or earphones with a volume control, as your music player must have the volume at maximum. Listen to your favorite tunes while connected for your Rife session and you will have a tactile sensation of your music!

Electrode Ports

Insert an electrode wire into an ELECTRODE JACK. (Beginners use only one electrode wire.) Be sure to insert the wire in a straight downward motion.

(Do not apply torque to the connection when placing or removing electrode wire from the port. This may damage the port of your Model A.)

Activity Light

This light (set in between the Electrode ports), indicates that there is output and the electrode wires are active. This means that there is current moving through the wires.

PLEASE NOTE: The ACTIVITY LIGHT will illuminate briefly when the power switch is turned on. It will darken until your selected track is playing.

When using the lower tracks, (most notably on track 1), the ACTIVITY LIGHT blinks or pulses. This indicates the slower pulses of the frequencies on the lower tracks. As the frequencies become higher, the green light will become solid.

Polarity Switch

This switch changes the direction of the electron flow, allowing for a more nuanced tactile experience.

Amplitude Dial

The AMPLITUDE DIAL is a ten-turn potentiometer dial that controls the amount of output, meaning the intensity of the signal. For A4.0 users, output is measured in volts as indicated on the meter. One full revolution equals 10 percent of the power.

Model A4.0 IS THE FIRST TOUCHSCREEN RIFE MACHINE!

CAUTION

Model A4.0 Users: Do NOT apply tension to the ribbon cable connecting the upper touch screen compartment with the lower section. This will interfere with the communication between the upper and lower sections. (It can be repaired, but will not be covered under warranty.)

Getting to Know Your Model A4.0 TOUCHSCREEN

(For instructions on the base, please see pages 20-22)

Display Screen

JWLABS' touch screen will appear when the Model A4.0 is turned on. You must press the screen (not just touch) to access the menu.

Welcome Screen

  1. The Battery Icon, which appears in upper right-hand corner of the touch screen, indicates the amount of charge available.
  2. Menu Selections: Favorites / A-E / F-M / N-Z / All / GA Tracks

Selecting Your Title

Individual Menu Screen

Use the Page Indicator and Directional Arrows to locate your session.

Session Screen

The Scroll Bar indicates elapsed time.

The Voltage Indicator located to the left of the Battery Icon on the display screen indicates the output being used (measured in Volts). The maximum is 80 Volts. You will rarely, if ever, use full power and only on the highest tracks. It's also normal to need extra power if the electrode patches are placed on the soles of your feet.

General Alignment Session

This is the only session that contains five tracks. All users will begin with Track 2.

You can FAVORITE sessions by pressing the star ⭐ when your title is selected (the star will become yellow when session title is selected). This feature allows you to access your commonly used frequency sessions from the Favorites menu on the welcome screen without going through the entire menu.

MODEL A4.0 SESSION TITLES

These frequency sessions have been expertly hand tuned from JWLABS' old style analog Model B. With supremely refined tuning, JWLABS has emphasized traditional target numbers and has employed sweeping techniques which span the entire spectrum of therapeutic frequencies.

JWLABS devices are intended for General Wellness and Entertainment only. No health claims are made or implied.

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

R

S

T

U

V

W

Y

Notes

Models: A3.3, A4.0, A4.0 Rife Machine, Rife Machine

File Info : application/pdf, 30 Pages, 3.72MB

PDF preview unavailable. Download the PDF instead.

Instruction-Manual-2020 A3-A4 ?srsltid=AfmBOordO9Ms4cPeZn3UdezgSarEL Y2FI4pj-615oDthr4IyDrmW Lx

References

Adobe PDF Library 17.0 Adobe InDesign 20.4 (Macintosh)

Related Documents

Preview JWLABS LiveWires 2.0 Operating Instructions and Guide
Comprehensive operating instructions for the JWLABS LiveWires 2.0 Rife Machine, covering setup, usage, safety precautions, and maintenance for general wellness and entertainment purposes.
Preview JWLABS Model A4.1 Instruction Manual
Comprehensive instruction manual for the JWLABS Model A4.1 Rife Machine, covering setup, operation, maintenance, and troubleshooting for general wellness and entertainment purposes.