Caroma Opal Toilet Suite
Vitreous China 4.5/3 litre Dual Flush Wall Faced Close-Coupled Toilet Suite
CI/SfB: (74.1) g3 | Date: May 2015 | Supersedes all previous issues | Version: 3.23.3
Product Overview
A fully integrated wall faced close-coupled toilet suite featuring a compact 4.5/3 litre dual flush cistern with low profile chrome plated push buttons and a universal connection system for varying pan setouts. Designed for low cost maintenance with easy to clean rounded surfaces. Supplied with a bottom inlet cistern and a back entry conversion kit.
Features the patented Caroma Uni-Orbital® connector for increased installation flexibility, extending to any position in a 25mm radius. Setout range from 60mm - 220mm, recommended 140mm.
Water Rating: 4.5 litres per full flush, 3 litres per half flush, 3.5 litres per average flush. Rated according to AS/NZS 6400. For more information, refer to: www.waterrating.gov.au.
Key Features & Specifications
- Pan: Opal 4.5 litre full flush washdown pan with open flushing rim.
- Traps: Universal trap for S or P-trap installations. 50mm vent option available.
- Cisterns: Opal cistern with free fitting lid, suitable for domestic and light commercial applications. Available as internal overflow. Standard bottom inlet with back entry conversion kit.
- Vandal Resistant Conversion Kit: Available (Code No. 750109) for heavy use commercial areas.
- Water Pressure: Minimum 30kPa to maximum 1000kPa flow pressure. Rain water tank compliant.
- Water Inlet: Accurate wall setout for 1/2" B.S.P. Nipple water inlet connection is essential.
- Fixing: Cistern fixed directly to pan with a robust concealed base fixing system, without the need for wall fixing.
- Seats: Supplied with Avalon Commercial toilet seat or Avalon Commercial soft close toilet seat. Quality solid section compression moulded seat with buffers and chrome hinges.
- Colours: White only.
- Installation Compliance: In accordance with AS/NZS 3500.2 drainline grade requirements.
Dimensions & Installation Details
All dimensions are in millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifications without notice.
Setout and Connections
Uni-Orbital® Connector Setout Range: 60mm to 220mm (up to 25mm sideways adjustment). The Uni-Orbital® connector can be positioned anywhere within a 25mm arc in the shaded area shown in the diagram.
Water Inlet Connection: Requires a 1/2" B.S.P. Nipple water inlet connection. The approximate projection from the finished wall is 22mm.
Overall Dimensions
| Feature | Dimension (mm) |
|---|---|
| Overall Height | 770 |
| Cistern Width | 425 |
| Pan Depth | 395 |
| Pan Foot Level | (Refer to diagram) |
| Recommended Setout | 140 (Range: 60-220mm with Uni-Orbital® connector) |
Diagram Description: A diagram illustrates the pan's setout position for the 1/2" B.S.P. Nipple connection, showing the Uni-Orbital® connector's range of adjustment. Another diagram shows the side profile of the toilet suite, detailing cistern and pan dimensions, including the pan foot level and wall projection for the water inlet. A third diagram focuses on the waste outlet and the Uni-Orbital® connector's positioning relative to the pan seal.
Model Information
| Product Description | Code No. |
|---|---|
| 4.5/3 litre Bottom Inlet with Back Entry Conversion Kit, Internal Overflow with Avalon Commercial Seat | 987063 |
| 4.5/3 litre Bottom Inlet with Back Entry Conversion Kit, Internal Overflow with Avalon Commercial Soft Close Seat | 987073 |
Installation Bedding Notes
The pan should be fixed to the floor using a sand cement mixture of 3:1 to a depth of 60mm. Avoid using lime or fast drying cement in the bedding mixture. When bedded, the back of the pan foot should be approximately 10mm above the finished floor.
