VEVOR Mini Table Saw - Product Description and Instructions

Product Description

The VEVOR Mini Table Saw is a versatile and powerful tool designed for woodworking and DIY enthusiasts. It offers high quality, stability, and performance, making it a reliable choice for various cutting and polishing tasks. The saw features a 7-level adjustable speed control, allowing for precise operation across different materials.

Table Saw List and Accessories

The following components are included with the table saw:

• Host (1)
• Saw blade (10)
• Metal saw blade (11)
• Double mesh cutter (12)
• Multifunctional saw blade (13)
• Emery saw blade (14)
• Small brush (15)
• Sponge wheel (16)
• Flocking sandpaper (17)
• Wool plate (18)
• Rounder (19)
• Drill chuck (20)
• Machine screw (21)
• Small hexagon screw (22)
• Drill chuck wrench (23)
• Backer/Anchor screw (4)
• Baffle/Baffle fixing screw (5)
• Angle ruler (6)
• Bolt driver (8)
• Fixing screw of internal saw blade clamp (9)
• Saw blade clamp fixing screw (7)

Saw Blade Usage Notes:

• Metal saw blade: Suitable for cutting wood, acrylic, and soft metals like aluminum. Note that metal cutting leads to significant saw blade wear.
• Double mesh cutter: Primarily for metal cutting.
• Multifunctional saw blade: Suitable for cutting wood, acrylic, and soft metals. Similar to the metal saw blade, it experiences significant wear when cutting metal.
• Emery saw blade: Used for grinding and cutting stone.

Other Accessories:

• Small brush: For cleaning debris after cutting.
• Sponge wheel: Installed on the grinding disc for cleaning and polishing.
• Flocking sandpaper: Installed on the grinding disc for grinding.
• Wool plate: Mounted on the grinding disc for polishing.
• Rounder: For shaping wooden beads.
• Drill chuck: Holds grinding discs and other accessories.
• Machine screw: Secures the flexible shaft and drill chuck.
• Small hexagon screw: Used with the machine meter screw when installing the soft shaft and drill chuck.
• Drill chuck wrench: For tightening the drill chuck.

Safety Instructions for Use of Electric Tools

To ensure safe operation and reduce the risk of fire, electric shock, and injury, please adhere to the following basic safety precautions:

1. Keep the workplace clean: Avoid using tools in cluttered areas.
2. Workplace environment: Do not use in dark, wet, or rain-exposed areas. Avoid use in the presence of flammable liquids or gases.
3. Children and unauthorized personnel: Keep them away from the workplace. Do not let them touch tools or power cords.
4. Tool storage: Store tools in dry, locked areas out of reach of children when not in use.
5. Feed rate and pressure: Maintain proper feed rate and pressure for safe and durable operation.
6. Tool and accessory selection: Use appropriate tools for their specified applications; do not overload.
7. Clothing: Avoid loose clothing and accessories. Wear rubber gloves, safety shoes, and protective caps for long hair.
8. Eye and respiratory protection: Wear safety glasses and a mask when dust or shavings are present.
9. Power cord: Do not step on or drag the power cord. Avoid contact with hot objects, sharp edges, or grease.
10. Workpiece security: Secure workpieces with clamps for safer cutting.
11. Posture: Maintain a firm and correct stance; do not overreach.
12. Tool maintenance: Keep tools sharp for optimal performance and safety. Lubricate and replace accessories as needed. Check conductors for damage and seek professional repair if found. Keep handles dry and free of grease.
13. Disconnect power: Always disconnect the power plug before replacing saw blades, performing maintenance, or changing accessories.
14. Remove tools: Ensure all adjustment tools and spanners are removed before turning the machine on.
15. Prevent accidental startup: Verify the tool's switch is off before plugging it in. Do not frequently press the switch with your finger after powering on.
16. Outdoor extension cords: Use only designated outdoor extension cords when working outdoors.
17. Stay alert: Remain attentive to your work and tools; do not operate when tired.
18. Check damaged parts: Inspect covers and other parts for damage before use. Ensure moving parts are correctly positioned and fixed parts are secure. Contact a repair shop for damaged components. Do not force a switch that is not functioning correctly.
19. Avoid electric shock: Keep your body from touching grounded metal surfaces.
20. Replace parts: Use only original factory-specified parts for repairs, handled by specialists.
21. Power supply voltage: Ensure the power supply voltage matches the tool's specifications. Incorrect voltage can damage the tool or cause accidents.

Table Saw Installation

(1) Installation of angle ruler

1. Push the angle ruler into the groove.
2. Loosen the screw, adjust the cutting angle, and then tighten and fix it.

(2) Installation of backers

1. Install the column and baffle on the hole corresponding to the backer. Note: Remove the protective film on the baffle for better vision.
2. Install gasket and sheep horn screw, tighten screw and fix firmly.
3. Installation completion display.

(3) Install the baffle

1. Use wrench to loosen the black screw on the saw blade clamp.
2. Remove the black screw and the outer saw blade clip.
3. Use wrench to loosen the small screw on the lower saw blade clamp.
4. Remove the saw blade clip at the bottom, turn the saw blade clip over and reinstall it, and use the wrench to re-tighten the saw blade clip.
5. Install the upper double mesh cutting piece.
6. Install the saw blade clamp on the upper side and retighten the black screw with the wrench.

Installation and replacement of saw blade

The installation method for the multi-function cutting piece, metal cutting piece, and emery cutting piece is the same.

1. Use wrench to loosen the black screw on the saw blade clamp.
2. Remove the black screw and the outer saw blade clamp.
3. Install the saw blade (note the direction of the saw teeth).
4. Put on the outer saw blade clamp, tighten the black screw, and fix it firmly.

Installation of double mesh cutting piece

1. Put the anchor screw in from the bottom up.
2. Screw in the horn screw again.
3. Slide left and right, adjust the cutting size, and then tighten the set screw.

(2) Installation and use of drill chuck

1. Use screwdriver to remove the table of the saw.
2. Remove all screws on the table.
3. Remove the table top of the stage saw.
4. Insert drill chuck into the shaft.
5. Tighten the small black screw to the connecting rod with a wrench.
6. Note that there are holes on both sides of the connecting rod, and screw the screws on both sides. Ensure they are tightened.
7. Finally, install the upper saw table.

The rounding tool and grinding disk can be installed on the drilling chuck.

1. Use the drill chuck wrench to loosen the drill chuck, install the rounding device, and then use the drill chuck wrench to tighten the drill chuck firmly.
2. Install the connecting rod on the grinding disc (ensure it is tightened to prevent the grinding disc from falling off).
3. Wool wheel, sponge wheel, and sandpaper plate are directly bonded to the sanding plate.

(3) Seven level adjustable speed power supply

1. Plug the power cord fully into the adapter.
2. Connect the other end of the adapter to the host.
3. Push the button on the adapter to adjust the table saw speed by adjusting the voltage.

Plug the power plug into a 110 V or 220 V socket.

! Please ensure the power plug is disconnected before replacing the blade or performing any operations. The machine can only perform one function at a time. Remove accessories after use. After sawing, lower the baffle to protect the saw blade. Be mindful of this guard when using other functions; do not use if the saw blade is not removed.

Warranty Information

Thank you for purchasing VEVOR products. Please read the user's manual and safety rules carefully before use.

Warranty Details

Quality Guarantee

1. Read instructions and safety indicators carefully before use.
2. Warranty does not cover normal wear or man-made damage to consumable parts.
3. The whole machine has a one-year warranty; the motor has a three-month warranty. Incorrect use, disassembly, or self-repair within the warranty period voids the warranty. Repairs will be charged based on parts and maintenance costs.
4. For warranty returns, both the user and manufacturer share shipping costs. Other issues should be negotiated with the seller.
5. This warranty certificate is only applicable to buyers in the People's Republic of China.

Product Specifications

The quality specification: Since its market launch, this product has received consistent praise from consumers for its high quality, stability, and performance. Choosing this product means choosing 'top tools, strong power'.