Installation Methods and Precautions
Receiver and Transmitter Key Schematic Diagram
The diagrams showcase various configurations of wireless doorbell receivers and transmitters. Key components consistently labeled include:
- LED Indicator: A visual status light.
- Music Selection Button: Used to cycle through available melodies.
- Volume Selection Button: Allows adjustment of the doorbell's sound level.
- Transmitter Button: The primary button on the transmitter unit.
Different visual styles and button layouts are presented across the various models depicted.
Installation Notes
Screw Mounting Method
This installation technique involves physically securing the doorbell unit to a surface using screws, as illustrated.
Double-sided Tape Installation Method
This method uses adhesive tape for mounting the doorbell unit, as shown in the visual guide.
Models
A10, A20, A86, A60, A88, A50, A78, A96, A58, A19, A28, A29
A Series Wireless Doorbell
The A Series wireless doorbell is a smart device designed for modern homes. It offers easy pairing between the transmitter and receiver, simple operation, and operates without electromagnetic interference.
Product Features
- Fashionable design
- Easy installation
- Multiple music options
- 5 levels of volume, including mute
- Extended receiving distance: Up to 300 meters in a straight line (based on laboratory testing).
- Transmitter and receiver units are freely interchangeable (matchable).
Music Settings
To set a desired melody, press and hold the volume button on the receiver for 4 seconds. The receiver will enter a learning state, indicated by a light. When the transmitter button is pressed, the receiver will flash and play a tone, confirming the music selection is locked.
Free Matching Mode of Transmitter and Receiver
To initiate the pairing process, press and hold the receiver's volume button for 4 seconds until it enters the learning state. Subsequently, pressing the transmitter button will cause the receiver to flash and ring, signifying a successful match.
NOTE
- Unauthorized personnel should not open the device to prevent damage to sensitive electronic components.
- The device contains high-voltage circuits. Do not open it while operational to avoid electrical shock.
- Proper usage of the doorbell contributes to its longevity.
- Performance range can be affected by environmental factors such as weather, radio frequency interference, low transmitter battery levels, and physical obstructions between the units.
- Degraded batteries may cause corrosion and damage. Replace batteries promptly if performance diminishes.
- Avoid installing the unit on metal surfaces like iron or stainless steel doors.
Specifications
Transmitter Battery: 23A 12V alkaline battery.
Receiver Voltage: 100-240V.
Dimensions:
- Transmitter: 75mm x 51mm x 20mm
- Receiver: 95mm x 65mm x 24mm
Quality Control
The product has passed quality checks, indicated by a "QC PASS 01" marking.
Disclaimer
Users are advised to consult relevant laws and regulations concerning any outstanding issues or disputes. The company retains the right to modify and interpret this statement.
