Danfoss MCAD A2 IP20 B Industrial Drive Technical Drawing

Product Overview

This document presents a technical drawing and key specifications for the Danfoss MCAD A2 IP20 B industrial drive. It details the physical dimensions, mounting requirements, and general characteristics of the unit.

Specifications

Product Specifications
Type	Value
Max Weight	4.9 kg / 10.8 lb
IP Class	IP20 B
Nema Class	CHASSIS

Physical Dimensions and Views

The drawing illustrates various views of the product to provide comprehensive dimensional information. All dimensions are in millimeters [inch] unless otherwise specified, with a general tolerance of ±1mm [0.4 inch].

General Views

Front View: Displays the control panel, including the display screen, navigation buttons, and VLT branding. Features a grounding symbol [ground symbol] and indicates a minimum cooling clearance of 100 mm [3.9 inches].

Side View (Air Outlet): Shows the top of the unit where air is expelled. The overall height is 341 mm [12.4 inches].

Side View (Air Inlet): Illustrates the bottom of the unit where air is drawn in.

Top View: Depicts the fan and air outlet configuration.

Rear/Mounting View: Details the rear of the unit, including mounting provisions and overall depth of 257 mm [10.1 inches]. A mounting base is also shown.

Isometric View: Provides a three-dimensional perspective of the product.

Label Area: A designated area for product labels is indicated on the unit.

Mounting Details

Detail A: Illustrates the mounting hole configuration. The hole diameter is Ø11 mm [4.3 inches], with a width of 90 mm [3.5 inches] and a height of 70 mm [2.8 inches] for the mounting slot.

Detail B: Shows a different mounting slot detail with dimensions of 4.5 mm [0.18 inches] by 5.5 mm [0.22 inches].

Mounting Base: A separate component or configuration for mounting the drive.

Important Notes

This drawing represents the most common version of this product variant. Minor variations may occur depending on the final product configuration.

Center of Gravity: Provided for reference only. The product configuration can influence the center of gravity along all three axes.

Drawing Information

Drawing Number: MCAD-A2-IP20-B

Model: MCAD-A2-IP20-B

Revision: 001

Sheet: 1 of 1

Designed by: DANFOSS

Date: 27-11-2015

Scale: 1:2 (Main Drawing), 1:1 (Details)

Material Size: A2

Copyright: Property of Danfoss A/S Nordborg, Denmark. Reproduction of contents requires authorization from Danfoss A/S.

	Danfoss VLT MCAD A2 IP20 AC Technical Dimensions and Specifications Detailed technical drawing and specifications for the Danfoss VLT MCAD A2 IP20 AC variable frequency drive, including dimensions, clearances, and product features. Learn about its IP20 AC rating and chassis type.
	Danfoss MCAD B3 IP20 Industrial Drive - Technical Specifications and Dimensions Detailed technical specifications, dimensional drawings, and mounting information for the Danfoss MCAD B3 IP20 industrial drive. Includes weight, IP rating, Nema class, airflow, and clearance requirements.
	Danfoss VLT MCAD A3 IP20 A Drive: Technical Specifications and Dimensions Detailed technical specifications and dimensional drawings for the Danfoss VLT MCAD A3 IP20 A variable frequency drive, including key measurements, features, and product information.
	Danfoss VLT® 5000 Series: Advanced Frequency Converters and Selection Guide Discover the Danfoss VLT® 5000 Series, a line of high-performance frequency converters for AC motor control. This guide details product selection, technical specifications, installation, and the innovative WCplus control system for optimal motor performance in industrial applications.
	VLT® Programmable I/O MCB 115 Installation Guide \| Danfoss Installation guide for the Danfoss VLT® Programmable I/O MCB 115 option, detailing its use with VLT® FC drive series including HVAC, Refrigeration, AQUA, and AutomationDrive models. Covers safety, installation procedures, electrical specifications, and terminal configurations.
	Danfoss VLT® Series 3500 Adjustable Frequency Drive Instruction Manual Comprehensive instruction manual for Danfoss VLT® Series 3500 Adjustable Frequency Drives, covering installation, operation, specifications, and troubleshooting for models VLT 3502-3800.
	Danfoss VLT Safe Torque Off Operating Guide This operating guide provides comprehensive information on the Safe Torque Off (STO) function for Danfoss VLT FC Series frequency converters, covering installation, commissioning, safety, and application examples.
	Danfoss VLT® Adjustable Frequency Drive Safe Torque Off (STO) Instruction Manual Comprehensive instruction manual for Danfoss VLT® Adjustable Frequency Drives featuring the Safe Torque Off (STO) function. Covers installation, commissioning, safety, technical data, and compliance with EN ISO 13849-1, IEC 61508, and EN 60204-1 standards.