BEA
LZR®-FLATSCAN REV PZ
COMPACT, PRESENCE SENSOR FOR AUTOMATIC, REVOLVING DOORS
DESCRIPTION
BEA's LZR®-FLATSCAN REV PZ is a compact, LASER-based, presence sensor for automatic, revolving doors. This sensor provides entry-point area and door leaf coverage, contributing to an ANSI 156.27-compliant system.
Its high-density, single curtain equipped with 400 measurement spots provides precise detection. With the wave of a hand, Hand-Gesture Setup™ simplifies installation, reducing configuration time.
Visual alignment spots aid in precise curtain angle adjustment and push-button teach-in further simplifies sensor setup.
Recessed and surface-mounting options are available to fit your application needs.
APPLICATIONS
Entry Point Protection
Description: Illustrates the sensor's application in protecting the entry point of a revolving door, showing a red detection beam covering the doorway.
Ceiling or Surface Mounting
Description: Shows the LZR®-FLATSCAN REV PZ sensor mounted on a ceiling, demonstrating a typical installation scenario.
DIMENSIONS
Recessed version
Description: Diagram showing the recessed mounting option of the LZR®-FLATSCAN REV PZ sensor.
Dimensions: 7 11/16" (Length) x 2 11/16" (Height) x 3 15/32" (Depth).
Surface-mount version
Description: Diagram showing the surface-mount option of the LZR®-FLATSCAN REV PZ sensor.
Dimensions: 6 3/5" (Length) x 1 7/10" (Height) x 3 7/10" (Depth).
TECHNICAL SPECIFICATIONS
TECHNOLOGY / PERFORMANCE
| Technology | LASER scanner, time-of-flight measurement |
| Detection mode | Presence |
| Mounting height | min: 6'6", max: 13' |
| Field of view | 90° |
| Angular resolution | 0.23° (400 spots within 90°) |
| Tilt angles | 0° – 5° |
| Optical characteristics (IEC 60825-1:2014) | wavelength 905 nm; output power < 0.1 mW; CLASS 1 wavelength 635 nm; output power < 1 mW; CLASS 2 - visible spot |
ELECTRICAL
| Supply voltage* | 12 – 24 VDC ±15% |
| Power consumption | ≤ 2.2 W |
| Response time | max. 90 ms |
| Relay output 1* | 1 relay (free of potential change-over contact) |
| max. contact voltage | 42V DC/AC peak |
| max. contact current | 1.0A (resistive) |
| Optofet output 2* | 1 optocoupler (galvanic isolation - polarity free) |
| max. switching voltage | 42V DC/AC peak |
| max. switching current | 100 mA |
| Test input | 30 VDC (max. switching voltage) low < 1 V, high > 10 V (max. 30 V) |
PHYSICAL
| Dimensions (recessed version) | 7" (L) x 3" (H) x 2" (D) [178 mm (L) x 85 mm (H) x 53 mm (D)] |
| Dimensions (surface version) | 6 5/8" (L) x 3 5/8" (H) x 1 5/8" (D) [168 mm (L) x 93 mm (H) x 42.5 mm (D)] |
| Material - Color | PC/ABS - black or aluminum |
| Protection degree | IP54 (IEC 60529) |
| LED signals | 1 bi-colored LED: detection/output status |
| Temperature range | -22 – 140 °F (if powered) |
| Humidity | 0 – 95% non-condensing |
| Vibrations | < 2 G |
COMPLIANCE
| Compliance | ISO 13849-1 PI "d"/ CAT2; IEC 60825-1; IEC 62061 SIL 2 |
* External electrical sources must be within specified voltages, max 15W and ensure double insulation from primary voltages.
