UGREEN HiTune T6 Hybrid Active Noise-Cancelling Earbuds
Model: WS200
Specifications
Product Name | UGREEN HiTune T6 Hybrid Active Noise-Cancelling Earbuds |
---|---|
Model | WS200 |
Bluetooth Version | Bluetooth 5.3 |
Bluetooth Profiles | HFP, AVRCP, A2DP, BLE, SPP |
Bluetooth Frequency | 2400MHz-2483.5MHz |
Bluetooth Range | 10 m/32.8 ft |
Codecs | AAC, SBC, LDAC |
Frequency Response | 20 Hz-40 kHz |
Max. RF Output Power | 4dBm |
Charging Case Battery | Polymer Lithium-Ion Battery |
Charging Case Input | 5V 500mA |
Charging Case Output | 5V 200mA |
Charging Port | USB-C |
Charge Earbuds | 1.5 hours |
Charge Charging Case | 2 hours |
Operating Time | 7 hours of music playback with single charging 30 hours of music playback with charging case |
*Statistics pertaining to battery life taken from UGREEN Labs, and were tested using the AAC codec at 60% volume in normal mode.
Charging
Charging Time: Earbuds: 1.5 hours, Charging Case: 2 hours
LED Indicators:
- Charging: Blinking White
- Fully Charged: LED Off
- Battery < 30%: Red Indicator Blinks for 3s
Note: Please use a 5V/1A power adapter at least for charging.
Earbud Wear & Adjustment
The UGREEN HiTune T6 includes 4 ear tips (XS, S, M, L) with the small tips pre-installed. Choose the size that best fits your ear for optimal comfort, sound quality, and noise cancellation.
- Flip the ear tips up.
- Align the size characters with the tuning hole and insert them into the earbuds.
- Flip the ear tips down to complete the installation.
Powering On/Off
- To Power On: Open the charging case lid.
- To Power Off: Place earbuds in the case and close the lid.
Pairing
Open the charging case lid to allow earbuds to enter pairing mode. Then, connect to "UGREEN HiTune T6" from your device's Bluetooth list.
Force Pairing
If you cannot find "UGREEN HiTune T6" in your Bluetooth list: Open the charging case lid (with earbuds inside), then press and hold the reset button for 3 seconds until the white indicator of the right earbud blinks.
Factory Reset
Open the charging case (with earbuds inside), then press and hold the reset button for 10 seconds. Successful resets are indicated when the LED indicator blinks 3 times, signifying that all paired information has been removed.
Controls
Next Track: [double-tap] on [right-earbud]
Previous Track: [double-tap] on [left-earbud]
Play/Pause: [single-tap] on [left-earbud] or [right-earbud]
Answer/End Call: [single-tap] on [left-earbud] or [right-earbud]
Decline Call: [press-hold-1s] on [left-earbud] or [right-earbud]
Cycle ANC Modes (ANC on/Awareness/ANC off): [press-hold-1s] on [left-earbud] or [right-earbud]
Activate Voice Assistant: [triple-tap] on [left-earbud]
Multi-device Pairing
- Complete pairing with the first device.
- Place the earbuds in the case, then press and hold the reset button for 3 seconds until the white indicator of the right earbud blinks.
- Search and connect to "UGREEN HiTune T6" from your second device's Bluetooth list.
Note: The HiTune T6 earbuds can only play music from one device at a time. There might be a momentary delay when switching devices due to differences in brands/versions and their compatibility.
Regulatory Information
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help. The device can be used in portable exposure condition without restriction.
EU Declaration of Conformity
Ugreen Group Limited declares that the product is in compliance with Directive 2014/53/EU & 2011/65/EU. More information is available at: https://www.ugreen.com/download/
Ugreen Group Limited
Add: Ugreen Building, Longcheng Industrial Park, Longguanxi Road, Longhua, Shenzhen, China
EU REP: Ugreen Group GmbH
Add: Mannheimer Str. 13, 30880 Laatzen, Germany
GB Declaration of Conformity
Ugreen Group Limited declares that the product is in compliance with UK Radio Equipment Regulations (SI 2017 No.1206) & The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 (SI 2012 No.3032). More information is available at: https://www.ugreen.com/download/
Ugreen Group Limited
Add: Ugreen Building, Longcheng Industrial Park, Longguanxi Road, Longhua, Shenzhen, China
UK REP: Acumen International Business Consultancy Limited
Add: 94 Ock Street, Abingdon, OX14 5DH, UK
Important WEEE Information
This symbol on the product(s) indicates that WEEE should not be mixed with general household waste. For proper treatment, recovery, and recycling, please take this product(s) to designated collection points. Disposing of this product correctly helps save valuable resources and prevent negative effects on human health and the environment. Contact your local authority for details of your nearest designated collection point.
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference; (2) this device must accept any interference, including interference that may cause undesired operation of the device. The device has been evaluated to meet general RF exposure requirement and can be used in portable exposure condition without restriction.
Warranty Information
A limited 2-year warranty applies to all UGREEN products purchased from UGREEN official store or authorized sellers. Please feel free to contact customer support if you encounter any problems.