UGREEN HiTune T3 Active Noise-Cancelling Wireless Earbuds
Model: WS106 | P/N: 90206
What's in the Box
- UGREEN HiTune T3 Earbuds (Left and Right)
- Charging Case
- Ear Tips (Sizes XS, S, M, L)
- USB-C Charging Cable
Getting Started
01 - Charging
Place the earbuds in the charging case. The charging case LED indicates the battery level: Red (below 30%), Yellow (30%-65%), Green (65%-100%). A full charge for the earbuds takes approximately 1.5 hours, and for the charging case, it takes approximately 2 hours.
Earbud charging status is indicated by a white breathing light.
02 - Wear and Adjust
Insert the earbuds into your ears and adjust for a comfortable and secure fit. Select the appropriate ear tip size (XS, S, M, L) for optimal sound isolation and noise cancellation.
03 - Powering On/Off
The earbuds automatically turn on when you open the charging case and turn off when you place them back in the case and close it.
Manual Power On/Off: Press and hold the touch control on each earbud for 3 seconds ([long press 3s]).
LED Indicators:
- Solid white: Earbuds are on and connected.
- Blinking white: Earbuds are in pairing mode.
- White breathing: Earbuds are charging.
04 - Bluetooth Pairing with Your Device
Open the charging case. The earbuds will automatically enter pairing mode, indicated by a blinking white LED.
On your device (smartphone, tablet, computer), go to Bluetooth settings, find "UGREEN HiTune T3" in the list of available devices, and select it to connect.
05 - Pairing with Another Bluetooth Device
With the earbuds inside the charging case, press and hold the charging case button for 10 seconds ([long press 10s]). The earbuds will enter pairing mode.
On the new device, go to Bluetooth settings, find "UGREEN HiTune T3", and connect.
06 - Fix Bluetooth Pairing or Connection Problems
If you encounter issues, go to your device's Bluetooth settings, select "UGREEN HiTune T3", and choose "Forget This Device". Then, repeat the pairing process (Section 04).
Controls
07 - Music Control
Left Earbud:
- [single tap]: Play/Pause music.
- [double tap]: Previous track.
- [triple tap]: Decrease volume.
Right Earbud:
- [single tap]: Play/Pause music.
- [double tap]: Next track.
- [triple tap]: Increase volume.
08 - Answer/End a Call
Left/Right Earbud:
- [single tap]: Answer or end an incoming call.
- [long press 3s]: Reject an incoming call.
09 - Noise-Cancellation Control
Left/Right Earbud:
- [double tap]: Cycle through modes: Active Noise Cancellation (ANC) On, Transparency Mode, ANC Off.
10 - Voice Assistant
Left/Right Earbud:
- [triple tap]: Activate your device's voice assistant (e.g., Siri, Google Assistant).
Specifications
| Product Name | UGREEN HiTune T3 Active Noise-Cancelling Wireless Earbuds |
| Model | WS106 |
| Bluetooth Version | 5.2 |
| Bluetooth Profiles | HSP, HFP, AVRCP, A2DP |
| Bluetooth Frequency | 2400MHz-2483.5MHz |
| Bluetooth Range | 10m |
| Codecs | AAC, SBC |
| Frequency Response | 20Hz-20kHz |
| Charging Case Battery | Li-Po |
| Charging Case Input | 5V-320mA |
| Charging Case Output | 5V-100mA |
| Charging Port | USB-C |
| Charge Earbuds | 1.5 hours |
| Charge Charging Case | 2 hours |
| Operating time | 7 hours of music playback with single charging; 24 hours of music playback with charging case. |
Statistics regarding battery life are from UGREEN lab, tested at 60% volume in AAC codec with ANC turned off.
Important Information
WEEE Information
This symbol on the product or documentation indicates that the product should not be mixed with general household waste. It must be taken to designated collection points for proper treatment, recovery, and recycling. Disposing of this product correctly helps prevent negative effects on health and the environment. Contact local authorities for nearest collection points.
For professional users in the European Union: Contact your dealer or supplier for EEE disposal information.
For disposal in countries outside the European Union: This symbol is valid only in the EU. Contact local authorities or dealers for the correct disposal method.
Warranty Information
A limited 2-year warranty applies to all UGREEN products purchased from the UGREEN official store or authorized sellers. Contact UGREEN for any issues.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it must not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits for an uncontrolled environment. The transmitter must not be co-located or operated with any other antenna or transmitter.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If interference occurs, try correcting it by reorienting the antenna, increasing separation, connecting to a different circuit, or consulting a dealer/technician.
The device meets general RF exposure requirements and can be used in portable exposure conditions without restriction.
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to two conditions: (1) this device may not cause interference; (2) this device must accept any interference, including interference that may cause undesired operation.
English Translation of French Statement: This device complies with Industry Canada licence-exempt RSS standards. Operation is authorized under two conditions: (1) the device must not cause interference; and (2) the user must accept any radio interference, even if it may compromise the device's operation.
The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.
FCC ID: 2AQI5-WS106 | IC: 26850-WS106 | CAN ICES-003(B)/NMB-003(B)
