Vanity Table 5066 Assembly Manual
Introduction
Thank you for purchasing this product. This manual provides detailed instructions for assembling the Vanity Table model 5066.
The vanity features a tri-fold mirror, ample storage with cabinets and shelves, and a matching stool. It also includes a built-in wireless charging area with USB and Type-C ports.
Important Notes:
- If the touch response is suddenly lost, unplug and replug the power to reset static electricity.
- If bubbles appear on the wireless charging panel, remove the protective film.
- For any questions during installation, please feel free to contact the manufacturer.
Wireless Charging Usage:
- This device supports wireless charging for mobile phones only. Charging other electronic devices may be dangerous.
- Ensure no metal objects (including magnetic or metal phone cases) are placed between your phone and the wireless charger, as they can interfere with charging or cause hazardous conditions.
Parts List
Identify all parts before beginning assembly:
- A: Tabletop (Hexagonal)
- B: Mirror Unit (Arched, Tri-fold)
- C, D: Side Mirror Panels
- E1, E2: Mirror Support Panels
- F: Mirror Support Brackets
- G, H, I, J, K, X: Desk and Stool Frame/Leg Components
- L: Drawer Front Panel (approx. 394x269mm)
- M: Door Panel (approx. 295x269mm)
- N: Stool Top (Round)
- O, P, Q, R: Shelf/Drawer Base Panels
- S: Cabinet Back Panel
- T, U: Stool Leg Components
- V: Cabinet Base/Side Panel
- W: Cabinet Back/Base Panel (with slats)
Accessories List
Check all included hardware and accessories:
| No. | Description | Quantity |
|---|---|---|
| 1 | Countersunk head tapping screw (6x28mm) | 14 Pcs |
| 2 | Countersunk head tapping screw (6x16mm) | 1 Pcs |
| 3 | Hinge & Screw (3*10mm) | 2 Pcs |
| 4 | Two in one nut (10x12mm) | 40 Pcs |
| 5 | Two in one screw (6x28mm) | 40 Pcs |
| 7 | Laminate support nail | 4 Pcs |
| 8 | Iron gasket & Self tapping screw (3.5x12) | 40 Pcs |
| 9 | Hinge | 4 Pcs |
| 10 | Cross machine wire (4x16mm) | 2 Pcs |
| 11 | Cross screwdriver | 1 Pcs |
| 12 | M6 nut | 2 Pcs |
| 13 | Power adapter | 1 Pcs |
| 14 | Countersunk head tapping screw (7x38mm) | 4 Pcs |
| 15 | Storage bag | 1 Pcs |
| 16 | Protective sticker | 14 Pcs |
| 17 | Countersunk head tapping screw (4x45mm) | 1 Pcs |
| 18 | Anti-tipping tape | 1 Pcs |
| 19 | Countersunk head tapping screw (4x16mm) gasket | 1 Pcs |
| 20 | Foot rubber pad (50x10x2mm) | 6 Pcs |
| 21 | A3 wireless box | 1 Pcs |
Assembly Instructions
Step 1
Attach screws (5) x 12 to panel V. Attach screws (5) to panel W.
Diagram shows screws (5) inserted into panels V and W.
Step 2
Attach panel Q to panel V using nuts (4) x 2.
Diagram shows panel Q being connected to panel V, with nuts (4) being tightened.
Step 3
Attach panel Q to panel V using nuts (4) x 2.
Diagram shows panel Q being connected to panel V, reinforcing the connection.
Step 4
Attach panel P to panel V using nuts (4) x 2.
Diagram shows panel P being connected to panel V, with nuts (4) being tightened.
Step 5
Attach panels O, Q, and P to panel W using nuts (4) x 6.
Diagram shows panels O, Q, and P being attached to panel W, secured by nuts (4).
Step 6
Attach screws (5) x 4 to panel S.
Diagram shows screws (5) being inserted into panel S.
Step 7
Attach panel S to the assembled cabinet structure (V, O, Q, P) using nuts (4) x 4.
Diagram shows panel S being attached to the main cabinet body, secured with nuts (4).
Step 8
Stick foot rubber pads (20) x 6 onto the bottom of panel W. Attach panels R, O, Q, P to panel V.
Diagram shows foot pads being applied to the base and panels R, O, Q, P being attached to panel V.
Step 9
Attach doors M and L to the cabinet frame using hinges (3, 9) and screws (8, 10). Adjust door gap using screws.
Diagram shows hinges being attached to doors and cabinet, with screws being used for assembly and adjustment.
Step 10 / 11
Attach the assembled cabinet structure to the tabletop (A) using screws (8) x 16. Choose to install the cabinet on the left or right side of the tabletop.
Diagram shows the cabinet unit being connected to the underside of the tabletop (A), with two options for placement.
Step 12
Attach screws (5) x 6 to the tabletop (A).
Diagram shows screws (5) being inserted into specific holes on the tabletop (A).
Step 13
Assemble the leg frame components (H, I, K, X) using screws (1) x 4.
Diagram shows the four main leg pieces being joined together to form a frame, secured with screws (1).
Step 14
Attach the assembled leg frame to the tabletop (A) using screws (1) x 3.
Diagram shows the leg frame assembly being attached to the underside of the tabletop (A) with screws (1).
Step 15
Attach leg components J and G to the tabletop (A) using screws (8) x 4 and screws (14) x 4.
Diagram shows the remaining leg supports (J, G) being attached to the tabletop (A) with the specified screws.
Step 16
Attach the cabinet units to the tabletop (A) using screws (1, 4, 12, 15). Choose to install the cabinet on the left or right side.
Diagram shows the final attachment of the cabinet structures to the tabletop, with options for left or right placement.
Step 17
Install the wireless charging box (21) into the designated opening on the tabletop (A). Align the holes and press down firmly.
Diagram shows the wireless charging module being inserted into the tabletop, with an instruction to align holes and press.
Step 18
Attach screws (5) x 10 to the tabletop (A).
Diagram shows screws (5) being inserted into the tabletop, likely for mirror/top panel attachments.
Step 19
Attach screws (5) x 4 to panels E1 and E2.
Diagram shows screws (5) being inserted into panels E1 and E2.
Step 20
Attach protective stickers (16) x 4 to panels F. Attach panels F to E1 and E2.
Diagram shows stickers (16) being applied to panels F, and then panels F being attached to E1 and E2.
Step 21
Attach screws (5) x 4 to panels C and D.
Diagram shows screws (5) being inserted into panels C and D.
Step 22
Attach panels C and D to the E1/F and E2/F assemblies using nuts (4) x 4.
Diagram shows panels C and D being connected to the mirror support structures using nuts (4).
Step 23
Attach the mirror unit (B) to the tabletop assembly using nuts (4) x 2 and stickers (16) x 2. Refer to Step 19 for sticker attachment.
Diagram shows the main mirror unit (B) being attached to the tabletop, secured with nuts (4) and stickers (16).
Step 24
Attach panel C to the tabletop assembly using nuts (4) x 4 and stickers (16) x 4. Refer to Step 19.
Diagram shows panel C being attached to the tabletop assembly, secured with nuts (4) and stickers (16).
Step 25
Attach panel D to the tabletop assembly using nuts (4) x 4 and stickers (16) x 4. Refer to Step 19.
Diagram shows panel D being attached to the tabletop assembly, secured with nuts (4) and stickers (16).
Step 26
Attach anti-tipping tape (18) and gasket (19) to the unit. Use screws (8) x 12, hinges (3) x 2, and power adapter (13) x 1.
Diagram shows the anti-tipping hardware being attached to the vanity and the power adapter being connected.
Step 27
Assemble stool legs T and U using screws (1) x 1 and (2) x 1.
Diagram shows the two main leg pieces (T, U) of the stool being joined together with screws.
Step 28
Attach the stool top (N) to the assembled legs using screws (1) x 4.
Diagram shows the round stool top (N) being secured to the stool legs with screws (1).
Step 29 / 30
Secure the vanity to the wall using anti-tipping tape (17, 18). This step is optional but recommended for safety.
Diagram shows the anti-tipping strap being attached to the vanity and the wall for stability.
