Magcubic L018 Portable Projector User Manual
Your comprehensive guide to setting up and operating your Magcubic L018 projector.
Important Safety Instructions
Read all instructions before use. Failure to follow instructions may void the warranty.
- To reduce the risk of fire or electric shock, do not expose the device to rain or moisture. Do not place liquid-filled objects on the device.
- Do not place on soft surfaces (tablecloths, carpets) as it may create a fire hazard.
- Avoid areas with excessive dust, dirt, or strong magnetic fields.
- Do not block ventilation holes to prevent overheating. Ensure adequate space around the device for ventilation.
- Protect from direct sunlight, heat, large temperature fluctuations, and moisture. Avoid extreme temperatures.
- The device surface may become hot during prolonged use. Shut down and unplug if hot, and resume after cooling.
- Handle with care, avoid touching the lens. Supervise children when using the device.
- Use only manufacturer-specified attachments or accessories.
- Avoid extreme vibration, which can damage internal components.
Package Contents
- Projector [x1]
- Remote Control [x1] (Batteries not included)
- Power Cable [x1]
- Projector User Manual [x1]
Product Overview
The projector features a lens on the front. The top surface includes ventilation grilles and an IR receiver. Connectivity ports are located on the rear or side, including an HDMI Input, a 3.5mm Stereo Jack, a USB Input, and a Power Socket. An IR receiver is also present for the remote control.
Remote Control
The remote control provides access to all projector functions. Key buttons include:
- ON/OFF [▶️ / ⏹️]: Powers the projector on or off.
- MUTE [?]: Mutes or unmutes audio.
- DIRECTIONS [⬆️ ⬇️ ⬅️ ➡️]: Navigates menus.
- OK [✔️]: Confirms selections.
- MENU [☰]: Opens the main menu.
- RETURN [↩️]: Goes back to the previous screen.
- VOL+/- [➕ / ➖]: Adjusts volume.
- BT AIR: For Bluetooth and Airplay functions.
- REMOTE: Switches remote control modes.
- SWITCH TO MOUSE CONTROL [?️]: Activates mouse control mode.
- ELECTRONIC FOCUS [?️]: Adjusts focus electronically.
- HOME [?]: Returns to the home screen.
The remote control has an IR receiver and should be pointed towards the projector's IR receiver.
Getting Started
- Connect the power cable to the projector and plug it into a power outlet.
- Press the power button on the projector or the remote control to turn the device on.
Troubleshooting & Tips
Blurry Image
If the image is blurry, navigate to Settings > Display > Auto Keystone Correction. Turn on Auto Keystone Correction or use Manual Keystone adjustment in the settings to correct the image. You can also press the [Focus] button on the remote control for the best clarity.
Focus Adjustment
Use the manual focus adjustment by pressing the [Focus] button on the remote control.
Placement Tip
For optimal viewing, ensure the projector is positioned horizontally relative to the projector screen.
Remote Control Usage Tips
- Do not submerge the remote control in water.
- Keep the remote control away from fire, wet, or hot places.
- Do not mix old and new batteries.
- Remove batteries if the remote control will not be used for an extended period to prevent leakage.
- Point the remote control towards the IR receiver on the projector.
- Use the remote control within a range of 6 meters and an angle of 30 degrees.
Cleaning Method
To clean the projector:
- Prepare a screwdriver and unscrew the bottom cover screws.
- Clean the projector using a cotton swab.
- Reinstall the bottom cover after cleaning.
Settings Menu Navigation
Access various settings by navigating through the projector's menu:
Networking Settings
Go to Settings > Network Settings to configure Wireless Network or Hotspot settings.
Bluetooth Settings
Go to Settings > Bluetooth Settings. Activate BT Switch to search and pair devices.
Projection Settings
Go to Settings > Projector Settings to configure Installation Mode, Device Mode, Digital Scaling, Auto Focus, Auto Four Corner Correction, Screen Recognition, Intelligent Obstacle Avoidance, Manual Trapezoidal adjustment, and Reset Trapezoidal Correction.
Application Settings
Go to Settings > All Applications to access the App Store, Bluetooth Speaker, Music, Play Store, Screen Cast, and WPS Office.
Language and Keyboard
Go to Settings > Language and Keyboard to set the system language and select input methods.
Date and Time Settings
Go to Settings > Date and Time Settings to configure Date, Time, Time Zone, and Time Format.
About
Go to Settings > About to view Device Model, UI Version, Android Version, Resolution, Memory, Storage, Wireless MAC, Serial Number, and access Local Upgrade or Online Upgrade options.
Other Settings
Go to Settings > Other Settings to configure External Input at Boot, Button Sound, Screen Saver, Scheduled Power Off, Restore Factory Settings, and Developer Mode.
Screen Cast
Navigate to Settings > Application Settings > Screen Cast. Open the Screen Cast service, turn on phone mirroring, and establish a connection.
Regulatory Information
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
ISED Statement
English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B). French: Cet appareil contient des émetteurs/récepteurs exempts de licence qui sont conformes aux RSS exemptés de licence d'Innovation, Sciences et Développement économique Canada. L'exploitation est soumise aux deux conditions suivantes : (1) Cet appareil ne doit pas provoquer d'interférences. (2) Cet appareil doit accepter toute interférence, y compris les interférences susceptibles de provoquer un fonctionnement indésirable de l'appareil. L'appareil numérique du ciem conforme canadien peut 3 (b)/nmb - 3 (b). This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. cet appareil est conforme à l'exemption des limites d'évaluation courante dans la section 2.5 du cnr -102 et conformité avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des données canadiennes sur l'exposition aux champs rf et la conformité. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. Cet équipement est conforme aux limites d'exposition aux rayonnements du Canada établies pour un environnement non contrôlé. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps.
Support
Thanks for purchasing!
Need help? Please send an email with the item name to our Brand Support Team at support@magcubic.com for a better experience, prompt reply, and further assistance.
Model Number Reference: L018AQ030924
