Magcubic HY300 Smart Projector - Quick Installation Guide

Attention

Please read this manual carefully before use and keep it for future reference.

1. The projector is non dustproof or waterproof.
2. In order to reduce the risk of fire and electric shock, do not expose the projector to rain and fog.
3. Please use the original power adapter. The projector should work under specified rated power supply.
4. When projector is working, please do not look directly into the lens, the strong light will flash your eyes and cause slight pain. Children should use the projector under the supervision of adults.
5. Do not cover the vents of projector. Heating will reduce the life of projector and cause danger.
6. Regularly clean projector vents, or dust may cause cooling malfunction.
7. Do not use the projector in greasy, damp, dusty or smoky environment. Oil or chemicals will cause malfunction.
8. Please handle with care during daily use.
9. Please cut off the power if the projector is out of use for long time.
10. Non-professionals are forbidden to disassemble the projector for testing and maintenance.

Structure Description

This manual is for reference only. It is subject to change without prior notice. Hotack reserves the right of final interpretation.

Product Overview

The Magcubic HY300 is a smart projector designed for home cinema and outdoor use. It features Android 11, Dual Wifi6, Bluetooth 5.0, and a resolution of 1280*720P, with support for 4K input. It is powered by an Allwinner H713 processor and offers 260 ANSI lumens brightness.

Component Identification

Projector Ports: Headset jack, HD port, ON/OFF switch, USB port, Air inlet vent.

Remote Control Functions: ON/OFF, Miracast, Navigation buttons (Up, Down, Left, Right, OK), Volume +/-, Mute, Menu, Home, Return, Rotate.

Quick Installation Guide

Follow these steps for initial setup:

1. Connect the power adapter to the projector and a power outlet.
2. Turn on the projector using the ON/OFF button or the remote control.
3. Follow the on-screen prompts to select your language and connect to a Wi-Fi network.

Key Features and Settings

Switching Applications

Navigate to 'My Apps' to view installed programs. Click on a program icon to switch between applications. All apps are clearly distinguished by their icons.

Networking Setting

Go to Settings > Networking Setting > WIFI setting. Turn WIFI ON, select your desired WIFI ID, and enter the password to connect to the internet.

Language Setting

Go to Settings > Language Setting to configure the display language and select the input method.

Bluetooth Setting

Go to Settings > BT setting. Turn BT ON, click 'Refresh Device', and choose the target device to pair.

Projection Setting

Access Settings > Projection Setting to configure projection mode and keystone correction. Options include Screen Zoom, Projection Mode, and Keystone Correction.

Audio Setting

Go to Settings > Audio Setting to adjust the volume. This setting is also accessible after connecting the projector to another output device via HD or Audio/Video.

Date and Time Setting

Go to Settings > Date And Time Setting to configure the timezone, time format, date format, date, and time. Options include Automatically Determine Date and Time, Set Date, and Set Time.

Miracast Setup

Ensure your Android device (phone, tablet, etc.) is on the same local wireless LAN as the projector. On your device, go to Home Screen > My Apps > Miracast > Open Miracast service > Turn on phone mirroring > Connect.

AirPlay Setup

Ensure your Apple device (iPhone, iPad, etc.) is on the same local wireless LAN as the projector. On your device, go to Home Screen > AppStore > AirPin > Install > Launch > Open AirPin service > Turn on phone mirroring > Connect.

DLNA

Supports DLNA DMR for DLNA/UPnP Media streaming. Features include Reverse Control Mode for Screen Mirroring via Sender, Emulate Click as Touch Pen, and Playing Media in DMS/NAS.

Other Settings

Access Settings > Other Setting for Application settings, Factory Reset settings, and Developer options.

Safety Instructions

• Please pay attention to important information related to the operation and maintenance of the projector. Read this information carefully to avoid problems. Following safety instructions will increase the life of the projector.
• Please consult qualified personnel for installation and repair services, and do not use damaged wires, accessories, and other peripherals.
• The projector should be kept away from flammable, explosive, strong electromagnetic interference (large radar stations, power stations, substations), etc. Strong ambient light (avoid direct sunlight), etc.
• Do not cover projector vents.
• Please use the original power adapter.
• Keep adequate ventilation and make sure vents are not covered to avoid projector overheating.
• When projector is working, please do not look directly into the lens, the strong light will flash your eyes and cause slight pain.
• Do not bend or drag the power cord.
• Do not put power cord under projector or any heavy objects.
• Do not cover other soft materials on power cord.
• Do not heat the power cord.
• Avoid touching power adaptor with wet hands.

Disclaimer

This manual provides general instructions. The pictures and functions described are subject to the actual product. Magcubic is dedicated to improving product performance and reserves the right to modify product functions and interfaces without prior notice. Magcubic is not responsible for any loss caused by incorrect operation, repair, or other reasons. Magcubic is not responsible for any third-party claims.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirements. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Support

For assistance, please send an email with the item name to the Magcubic Brand Support Team at magcubic@163.com for a better experience, prompt reply, and further assistance.