Hilti X-MW ALH 27/32 L Wire Hanger System
Brand: Hilti
Product Overview & Compliance
The Hilti X-MW ALH 27/32 L is a wire hanger system designed for secure and efficient suspension of luminaires and other fixtures. It features a UL Listing Mark: [UL Listed] E522519. The system has a load rating of [100 lbs], which corresponds with mechanical strength according to UL Standard for Safety Luminaires, UL 1598.
Compatibility
Compatible Fastening Tools and Hanger Models
| Hanger Model | Compatible Hilti Fastening Tools |
|---|---|
| ALH27 | DX 351 CT DX 351 ME, DX 351 ME + X-PT 351 |
| ALH32 | DX 5 F8, DX 5 F8 + PT 5 DX 6 F8, DX 6 F8 + PT 6 |
Compatible Fasteners
- X-MW ALH
- For DX 351 ME / DX 351 CT / DX 5 F8 / DX 6 F8
- X-FG8 ME 351/S351
- X-351-F8CT
Fastener size range: [15/64" - 7/16"] ([6mm - 11mm]).
Installation Instructions
- Select Tool and Hanger: Choose the appropriate Hilti fastening tool (e.g., DX 351 CT, DX 351 ME, DX 5 F8, DX 6 F8) and the corresponding X-MW ALH hanger model (ALH27 or ALH32).
- Attach Hanger: Secure the selected X-MW ALH hanger to the Hilti fastening tool.
- Fasten to Surface: Fire the fastener into the mounting surface (e.g., concrete ceiling). The hanger is now attached.
- Secure Wire: Ensure the wire of the hanger is properly secured.
- Multiple Hangers: For certain applications, a minimum of [5x X-MW ALH] may be required per attachment point.
- Clearance: Maintain a minimum clearance of [2mm], potentially indicated by a [diameter] symbol.
- Fixture Attachment: Attach the wire hanger system to the fixture or conduit. Ensure a minimum clearance of [150mm / 6 inches] from the mounting surface to the fixture.
- Wire Loop: Form or secure a loop in the wire as needed.
- Angle Limitation: The hanger angle should not exceed [maximum 60°] and should be [greater than 60°] from the mounting surface.
Maximum Load Capacity: The system supports a maximum load of [10 kg / 22 lbs]. Ensure the load does not exceed [2 times] the specified limit.
