Parkside Cordless Work Lamp
Model: IAN 452475_2310
Brand: Parkside
1. Introduction
Congratulations on purchasing this high-quality Parkside Cordless Work Lamp. These operating instructions contain important information regarding its safety, use, and disposal. Please read them carefully before use.
2. Scope of Delivery
- 1x Work lamp (incl. battery)
- 1x USB-C to USB-A charging cable
- 1x Charger station
- 1x Operating and safety instructions
3. Technical Specifications
- Product Classification: Work lamp
- IAN: 452475_2310
- Tradix Art.-Nr.: 452475-23-A
- Total Power: Max. 6.7W
- LEDs: COB LED (max 8W), Top LED (max 1.5W)
- Battery: 1x LiIon, 18650, 2,200mAh, 3.7V DC
- USB-C Port: 5V, 1A
- Light ON Time: COB 100% = 3 hours, COB 50% = 6 hours, Front light = 16 hours
- Dimensions: 70x47x212 mm (folded)
- Material: Plastic (ABS, TPR, PVC), Metal (aluminium)
4. Proper Use
This product is intended for private, non-commercial use as a work lamp. It is not suitable for household room lighting or rough use. Use only as described in the instructions.
5. Safety Instructions
⚠️ WARNING! A defective product must not be used! Risk of injury!
- Do not use if malfunctioning, damaged, or defective. Have it checked/repaired before reuse.
- LEDs are not replaceable. Dispose of the product if LEDs are defective.
- Improper repairs can cause significant danger.
- Battery Safety: The product has a built-in, non-replaceable battery. Do not short-circuit, open, expose to fire/water, or mechanical stress. Handle leaked batteries with protective gloves.
- ℹ️ Attention! Children must not perform maintenance or cleaning. Comply with national regulations.
- ⚠️ Risk of injury or suffocation! Keep product and packaging out of reach of children. Supervise children in the vicinity.
- ⚠️ WARNING! Manipulation and alteration Do not manipulate or modify the product. Do not cover the light during use to prevent overheating and fire hazards.
6. Use
Start-up
- Remove all packaging and verify all parts are present and undamaged.
- Before first use, deactivate the discharge protection by pressing the recessed button with a blunt object (e.g., a toothpick).
- Unfold the work lamp. It can be attached to a metal surface with its magnet or hung on a hook using the metal bracket. It can also be held by the handle.
- Press the on/off button:
- 1st press: 100% COB LED
- 2nd press: 50% COB LED
- 3rd press: Front LED
- Press again to switch off.
- Three LEDs indicate battery status. Recharge when luminosity decreases or LEDs go out.
- Charging:
- Connect the USB-A end of the cable to a power source and the USB-C end to the product's port. Ensure the power source has a SELV output (max 5V).
- Alternatively, connect USB-A to power, USB-C to the charging station, and place the lamp in the station.
- For long-term storage, activate discharge protection. Deactivate it again before next use.
Cleaning
Use a dry or slightly damp soft cloth. Do not use cleaning agents.
7. Declaration of Conformity
This product complies with EU directives for Electromagnetic Compatibility (2014/30/EU) and RoHS (2011/65/EU). The full declaration is available from the importer.
8. Disposal
♻️ Disposal of Packaging: Made from environmentally friendly materials. Dispose of at local recycling centers.
♻️ Disposing of the Product: The ?️ symbol means this device must not be disposed of with household waste. Return it to designated collection points or recycling centers. Lidl offers free return options.
♻️ Disposal of Batteries: Recycle used batteries according to Directive 2006/66/EC. Do not dispose of with domestic waste due to heavy metals (Pb, Hg, Cd). Return used batteries to sales points or collection points. Discharge batteries before disposal.
9. Warranty
?️ Warranty: 36-month warranty from date of purchase. Excludes damage from improper use or unauthorized modifications. Contact specialist dealer for defects. Proof of purchase (receipt) and item number (IAN 452475_2310) are required.
Contact Service:
TRADIX GmbH & Co. KG
Schwanheimer Str. 132
64625 Bensheim / GERMANY
Tradix Service Center
c/o teknihall GmbH
Alfred-Nobel-Str. 1
63128 Dietzenbach
Hotline: 00800 / 300 120 01 (free of charge)
Email: parkside-gb@tradix.de
More manuals: Visit parkside-diy.com