SYLVANIA START Spot 3CCT
Installation Guide and Technical Specifications
General Specifications
- Brand: SYLVANIA
- Model: START Spot 3CCT (IS16333B)
- Technology: ? LED
- Voltage: 220-240 V
- Frequency: 50/60 Hz
- Operating Temperature: -10°C to 40°C
- Impact Resistance: IK03
- Safety Symbols: ⚠️ General safety precautions apply. [no-water-jet] [not-water-submersible] [avoid-direct-sunlight]
Model Variants
START Spot 3CCT IP44
- IP Rating: IP44
- Ceiling Cut-out Diameter: Ø87 mm
- Minimum Ceiling Void: 100 mm
- Recess Depth: 45.5 mm
- Beam Angle: 30°
Diagram Description: Cross-section view of the IP44 model installed in a ceiling. Shows minimum 200 mm clearance above, 5 mm minimum clearance from adjacent surfaces, and IP20 rating for internal components.
START Spot 3CCT IP65
- IP Rating: IP65
- Ceiling Cut-out Diameter: Ø87 mm
- Minimum Ceiling Void: 100 mm
- Recess Depth: 47 mm
- Beam Angle: 30°
Diagram Description: Cross-section view of the IP65 model installed in a ceiling. Shows minimum 200 mm clearance above, 5 mm minimum clearance from adjacent surfaces, and IP20 rating for internal components.
Installation and Features
Step 1: Ceiling Preparation
Diagram Description: Shows a circular template for cutting the ceiling hole. Dimensions provided are: Ceiling thickness 5-20 mm, Cut-out diameter 68-74 mm.
Step 2: Wiring Connections
Diagram Description: Illustrates connecting the power supply wires (Live 'L', Neutral 'N', and Earth 'E') to the fixture's terminal block.
Step 3: Driver Connection
Diagram Description: Shows the connection of the power supply cable to the separate driver unit using a push-fit connector.
Step 4: Wire Specifications and Load
Diagram Description: Details wire connection requirements: maximum stripping length of 7 mm, minimum wire size of 2 x 0.75 mm², and maximum wire size of 2 x 1.50 mm².
Total Maximum Load: 1.8 A
| Connector Type | Max Wire Size (mm²) | Quantity (pcs) |
|---|---|---|
| 10A C-type | 0.75 | 60 |
| 16A C-type | 1.50 | 100 |
Step 5: Color Temperature Selection
Diagram Description: Close-up of the fixture's selector for choosing color temperature: 2700K, 3000K, or 4000K.
Step 6: Fixture Installation
Diagram Description: Shows the main fixture body being inserted into the ceiling cut-out, with spring clips engaging.
Step 7: Trim Attachment
Diagram Description: Illustrates attaching the decorative trim or bezel to the installed fixture.
Step 8: Final Product
Diagram Description: Shows the completed installation of the SYLVANIA START Spot 3CCT fixture.
