SYLVANIA START Spot 3CCT
Model: IS16333B
Power Input: 220-240 V, 50/60 Hz
Operating Temperature: -10°C to 40°C
Impact Resistance: IK 03
Ingress Protection Ratings: IP20, IP44, IP65
Safety Symbols: ⚡ [warning], ? [light source], ?❌ [no plug], ? [double insulation]
Product Variants
START Spot 3CCT IP44
This variant is designed for specific ceiling installations, offering IP44 protection.
Key Specifications:
- Cutout Diameter: Ø 68-74 mm
- Minimum Ceiling Thickness: 5 mm
- Maximum Ceiling Thickness: 20 mm
- IP Rating: IP44
- Beam Angle: 30°
Diagram Description: A diagram shows a recessed luminaire in a ceiling. Dimensions indicate a cutout diameter of Ø 68-74 mm. Minimum ceiling thickness is 5 mm, maximum is 20 mm. The luminaire has an internal IP20 rating, and the fixture itself is rated IP44. A 30° beam angle is indicated.
START Spot 3CCT IP65
This variant offers enhanced protection, rated IP65, for more demanding environments.
Key Specifications:
- Cutout Diameter: Ø 87 mm
- Minimum Ceiling Thickness: 5 mm
- Maximum Ceiling Thickness: 20 mm
- IP Rating: IP65
- Luminaire Height: 45.5 mm
- Minimum Clearance: 200 mm
Diagram Description: A diagram shows a recessed luminaire in a ceiling. Dimensions indicate a cutout diameter of Ø 87 mm. Minimum ceiling thickness is 5 mm, maximum is 20 mm. The luminaire has an internal IP20 rating, and the fixture itself is rated IP65. Luminaire height is 45.5 mm. Minimum clearance from illuminated surfaces and other building components is 200 mm.
Installation Instructions
Follow these steps for proper installation:
Step 1: Prepare Ceiling Cutout
Mark and cut a circular opening in the ceiling according to the specified dimensions for the chosen model (Ø 68-74 mm for IP44, Ø 87 mm for IP65). Ensure the ceiling material thickness is between 5 mm and 20 mm.
Step 2: Connect Wiring
Feed the power supply cables (Live 'L' and Neutral 'N') through the ceiling opening to the luminaire location.
Step 2a & 2b: Wire Connection
Connect the power supply wires to the luminaire's internal wiring terminals. Ensure correct polarity for Live (L) and Neutral (N) connections.
Step 3: Connect to Luminaire
Connect the power supply wires to the luminaire's integrated connector. A minimum wire length of 100 mm is recommended for connection.
Step 4: Secure Wiring
Step 4a & 4b: Terminal Block and Current Rating
The luminaire is designed for AC 220-240 V and has a total maximum current rating of 1.8 A. Use appropriate wiring for the terminal block. Wire stripping length should be a maximum of 7 mm. The luminaire supports connecting wires from 0.75 mm² up to 1.50 mm².
| Connector Type | Wire Gauge | Stripping Length | Capacity (pcs) |
|---|---|---|---|
| 10A C-type | min. 2 x 0.75 mm² | max. 7 mm | 60 |
| 16A C-type | min. 2 x 1.50 mm² | max. 7 mm | 100 |
Step 5: Select Color Temperature (if applicable)
Some models may feature a switch or selector to choose between different color temperatures, such as 2700K (warm white), 3000K (neutral white), and 4000K (cool white).
Step 6: Install Luminaire into Ceiling
Insert the luminaire body into the prepared ceiling cutout. The luminaire is equipped with spring clips that will secure it in place.
Step 7: Secure Luminaire
The spring clips will engage with the ceiling material, holding the luminaire firmly. Ensure the luminaire is flush with the ceiling surface.
Step 8: Final Appearance
The installed luminaire presents a clean, recessed finish in the ceiling.
