Qubo Smart Air Purifier Q600 Quick Start Guide
Thanks for placing your trust in the Qubo Smart Air Purifier Q600.
Key Features
- Four-layer Ultra Filtration
- QSensAI Technology
- Remote Control via Qubo App
The display shows PM2.5 levels, for example, '003'.
Know Your Smart Air Purifier
Components:
- Air Outlet
- Power Cord
- 4-in-1 Filter
- Rear Handle
- Rear Panel
Note: Images are representative for initial setup guidance.
Know the Control Panel
Control Buttons:
- QSensAI: Turn the QAI mode on/off ?
- Timer: Set 1/2/4/8h or no timer ⏱️
- Power: Turn on/off ?
- Fan Speed: Choose Sleep/1/2/3 fan speed ?
- Auto: Turn Auto mode on/off ?
- Filter Reset: Long press QAI and timer buttons together for 3 seconds to reset the filter time ?
- Child Lock: Long press Fan Speed and Auto buttons together for 3 seconds to turn on the Child Lock mode ?
Display Panel Indicators:
- AQI Indicator
- PM2.5 Display (e.g., 050)
- Filter Life Indicator
- Child Lock Indicator
- WiFi Indicator ?
Get the Filter Ready
- Remove the rear panel using the handle.
- Pull out the filter and remove the protective polybag.
- Place the new filter back inside and close the panel.
- Switch on the purifier and connect to the Qubo App.
- Ensure the rear panel is closed properly to avoid errors.
- Make sure the air purifier is placed correctly.
Note: Images are representative for initial setup guidance.
Place Your Air Purifier
Room Sealing:
Close windows and doors to prevent outside air from slowing down the purification process.
Placement Distance:
Place your air purifier at least 1 foot (approx. 30 cm) away from walls to ensure optimal airflow and purification.
Illustration shows the purifier placed 1 ft away from a wall.
Connect Your Air Purifier to Qubo App
- Download the Qubo App by scanning the QR code.
- Sign up to create your account with Qubo.
- Switch on your Smart Air Purifier.
- Tap on the Menu in the app.
- Tap on 'Add Devices'.
- Select the device's location, tap on 'Environment', and select Q600.
- Check for a blinking white light on the purifier. If it's blinking, tap 'Yes' in the app. If not, long press the 'Power button' for 10 seconds to reset the device and try again.
App screenshots show device selection and troubleshooting for blinking light.
Connect Your Air Purifier to Qubo App (Continued)
- The app will search for the air purifier via Bluetooth. Ensure Bluetooth is enabled on your device.
- After scanning, select 'Q600' in the 'Add Device' section.
- Name your air purifier and assign it a location.
- Enter your Wi-Fi ID and password. Ensure you are connected to a 2.4GHz Wi-Fi network.
- After setup is complete, tap 'Continue'.
- On successful Wi-Fi authentication, your device will be connected to the app.
App screenshots show device found, network selection, and connection progress.
Know the Qubo App for Air Purifier
Main Interface:
The app displays a personalized room name, PM2.5 status monitor (e.g., '35 Good'), and controls for Power Button, Auto Mode, Manual Mode, Sleep Mode, and QSensAI Mode.
Additional Features:
The app also provides Air Quality Insights, Scheduler, Countdown Timer, Child Lock, and Filter Life status.
Qubo App Features Explained
| Feature | Description |
|---|---|
| Power Button | Switch on/off remotely via app |
| Auto mode | Automatically changes fan speed based on PM2.5 pollutants. |
| Sleep Mode | Super silent purification with display off for undisturbed sleep. |
| Manual Mode | Manually change fan speed to control purification. |
| QSensAI | Senses PM2.5 pollutants and adjusts purifier operation for efficient purification. |
| Insights | Track indoor/outdoor PM2.5 levels and daily runtime for optimal usage and air quality control. |
| Child Lock | Disable physical buttons via the Qubo App. |
| Schedule | Set daily routines for purifier functions (power, mode, fan speed). |
| Countdown | Set a timer for automatic turn-off (1, 2, 4, or 8 hours). |
| Filter Life | Monitor filter health (percentage/hours) for optimal performance and timely replacement. |
Know How to Change The Filter
- Remove the Rear Panel: Use the rear handle to detach the rear panel.
- Take Out the Filter: Pull the filter out using the ribbon attached to the filter and replace with new filter.
- Reattach the Rear Panel: Put the rear panel back and press the filter button for 5 seconds to indicate the filter has been reset.
- Reset Filter Life from App: Select 'Reset Filter Life' in the Qubo App. The filter life will update.
Important: Close the back panel properly; otherwise, the device will show an error.
Note: Images are representative for initial setup guidance.
Control Remotely via Qubo App
- Switch on your Smart Air Purifier.
- Open the Qubo App.
- Log in using the same account credentials used to add the Air Purifier.
- Select the Air Purifier you wish to control.
For assistance with any product-related issues, please visit quboworld.com/support.
