Qubo Smart Air Purifier Q1000 Quick Start Guide

Key Features

• Four-layer Ultra Filtration
• QSensAI Technology
• Remote Control via Qubo App

Know Your Smart Air Purifier

Side Handle: Located on the side for carrying.

Air Outlet: Where purified air is expelled.

4-in-1 Filter: The main filtration unit.

Rear Handle: Used for detaching the rear panel.

Rear Panel: Covers the filter compartment.

Power Cord: Connects the device to a power source.

Know the Control Panel

The control panel features several buttons:

• QSensAI: Turn the QAI/Child Lock mode on/off.
• Timer: Set timer for 1, 2, 4, or 8 hours, or no timer.
• Power: Turn the device on/off.
• Fan Speed: Choose between Auto, Sleep, 1, 2, or 3 fan speeds.
• Filter Reset: Long press to reset the filter indicator.
• Child Lock: Long press QSensAI for three seconds to activate Child Lock mode.

Display Panel: Shows AQI Indicator and WiFi Indicator. Displays PM2.5 levels.

Get the Filter Ready

1. Remove the rear panel using the rear handle.
2. Pull out the filter and remove the protective polybag.
3. Place the filter back inside and close the rear panel.
4. Switch on the purifier and connect to the Qubo App.
5. Ensure the rear panel is closed properly to avoid errors.
6. Make sure the air purifier is placed correctly.

Place Your Air Purifier

Seal the room by closing windows and doors to prevent outside air from slowing down the purification process.

Maintain a distance: Place your air purifier at least 1 foot (approx. 0.3 meters) away from walls to ensure optimal airflow and purification.

Connect Your Air Purifier to Qubo App

1. Scan the QR code to download the Qubo App.
2. Sign up to create your account with Qubo.
3. Switch on your Smart Air Purifier.
4. Tap on the Menu in the app.
5. Tap on 'Add Devices'.
6. Select the location (e.g., 'Environment') and choose 'Q1000'.
7. If the device's white light is blinking, tap 'Yes' in the app. If not, long press the 'Power button' for 10 seconds to reset the device and try again.
8. The app will search for the air purifier via Bluetooth. Ensure Bluetooth is enabled on your phone.
9. After scanning, select 'Q1000' in the 'Add Device' section.
10. Name your air purifier and assign it a location.
11. Enter your Wi-Fi ID and password. Ensure you are connected to a 2.4GHz Wi-Fi network.
12. After setup is complete, tap 'Continue'.
13. On successful Wi-Fi authentication, your device will be connected to the app.

Know the Qubo App for Air Purifier

The Qubo App allows for remote control and monitoring of your air purifier.

App Features:

• Personalised Room Name: Name your device for easy identification.
• PM Status Monitor: Displays real-time PM2.5 levels and air quality status (e.g., Good).
• Modes: Control via Power Button, Auto Mode, Sleep Mode, Manual Mode, and QSensAI Mode.
• Air Quality Insights: Track indoor and outdoor PM2.5 levels and daily runtime.
• Scheduler: Set schedules for your air purifier's operation based on days, times, and functions (power, mode, fan speed).
• Countdown Timer: Set the purifier to automatically turn off after 1, 2, 4, or 8 hours.
• Child Lock: Enable via the app to disable physical buttons on the purifier.
• Filter Life: Monitor filter health, remaining life in percentage and hours, for timely replacement.

Know How to Change The Filter

1. Remove the Rear Panel: Use the rear handle to detach the rear panel.
2. Take Out the Filter: Pull the filter out using the attached ribbon and replace it with a new filter.
3. Reattach the Rear Panel: Secure the rear panel and press the filter button for 5 seconds to reset the filter indicator.
4. Reset Filter Life from App: Select 'Reset Filter Life' in the Qubo App to update the filter status.

Control Remotely via Qubo App

Follow these steps to control your air purifier remotely:

1. Switch on your Smart Air Purifier.
2. Open the Qubo App.
3. Log in using your Qubo account credentials.
4. Select the Air Purifier you wish to control.

Scan the QR code for any product-related issues.

For Assistance: WhatsApp us on +91 8766205724 or visit quboworld.com/support.