Qubo Smart Air Purifier Q600 Quick Start Guide

Key Features

• Four-layer Ultra Filtration
• QSensAI Technology
• Remote Control via Qubo App

Display shows PM2.5 levels.

Know Your Smart Air Purifier

Air Outlet: Located at the top of the unit.

4-in-1 Filter: Internal filter component.

Rear Handle: For detaching the rear panel.

Rear Panel: Covers the filter compartment.

Power Cord: Connects the device to a power source.

Note: Images are representative for initial setup guidance.

Know the Control Panel

The control panel features several buttons:

• QSensAI: Turn the QAI mode on/off.
• Timer: Set timer for 1, 2, 4, or 8 hours, or no timer.
• Power: Turn the device on/off.
• Fan Speed: Choose from Sleep, 1, 2, or 3 fan speeds.
• Auto: Turn Auto mode on/off.
• Filter Reset: Long press QAI and Timer buttons for 3 seconds to reset the filter life.
• Child Lock: Long press Fan Speed and Auto buttons for 3 seconds to enable/disable Child Lock mode.

Display Panel Indicators:

• AQI Indicator: Shows Air Quality Index.
• PM2.5 Display: Shows current PM2.5 concentration.
• Filter Life Indicator: Displays remaining filter life.
• Child Lock Indicator: Indicates if Child Lock is active.
• WiFi Indicator: Shows Wi-Fi connectivity status.

Get the Filter Ready

1. Remove the rear panel using the rear handle.
2. Pull out the filter and remove the protective polybag.
3. Place the filter back inside and close the rear panel.
4. Switch on the purifier and connect to the Qubo App.
5. Ensure the rear panel is closed properly to avoid errors.
6. Make sure the air purifier is placed correctly.

Place Your Air Purifier

Room Sealing: Close windows and doors to optimize purification.

Placement: Maintain at least 1 foot (approx. 0.3 meters) distance from walls for optimal airflow and purification.

Connect Your Air Purifier to Qubo App

1. Scan the QR code to download the Qubo App.
2. Sign up to create your account with Qubo.
3. Switch on your Smart Air Purifier.
4. Tap on the Menu in the app.
5. Tap on 'Add Devices'.
6. Select 'Environment' and then 'Q600' after choosing the device's location.
7. Check for a blinking white light on the purifier. If it's blinking, tap 'Yes' in the app. If not, long press the 'Power' button for 10 seconds to reset the device and try again.
8. The app will search for the air purifier via Bluetooth. Ensure Bluetooth is enabled.
9. After scanning, select 'Q600' in the 'Add Device' section.
10. Name your air purifier and assign it a location.
11. Enter your Wi-Fi ID and password. Ensure you are connected to a 2.4GHz Wi-Fi network.
12. Tap 'Continue' after setup is complete.
13. On successful Wi-Fi authentication, your device will be connected to the app.

Know the Qubo App for Air Purifier

The Qubo App allows for remote control and monitoring of your air purifier.

Key App Features:

• Personalised Room Name: Name your device's location.
• PM Status Monitor: Displays real-time PM2.5 levels and air quality status (e.g., Good, Moderate, Poor).
• Power Button: Switch the purifier on/off remotely.
• Auto Mode: Automatically adjusts fan speed based on PM2.5 pollutants.
• Sleep Mode: Provides silent operation with the display turned off for undisturbed sleep.
• Manual Mode: Manually control the fan speed for purification.
• QSensAI Mode: Senses PM2.5 pollutants and automatically adjusts operation for efficient purification.
• Air Quality Insights: Track indoor and outdoor PM2.5 levels and daily runtime. Use data for scheduling and optimizing air quality control.
• Child Lock: Disable physical buttons on the purifier via the app.
• Schedule: Set daily routines for the purifier, including power, mode, and fan speed.
• Countdown Timer: Set the purifier to automatically turn off after 1, 2, 4, or 8 hours.
• Filter Life: Monitor filter health, remaining life in percentage and hours, for timely replacement.

Know How to Change The Filter

1. Remove the Rear Panel: Use the rear handle to detach the panel.
2. Take Out the Filter: Pull the filter out using the attached ribbon and replace it with a new one.
3. Reattach the Rear Panel: Secure the panel and press the filter button for 5 seconds to reset the filter indicator.
4. Reset Filter Life from App: Select 'Reset Filter Life' in the Qubo App to update the filter status.

Note: Close the back panel properly to avoid device errors.

Control Remotely via Qubo App

Follow these steps to control your air purifier remotely:

1. Switch on your Smart Air Purifier.
2. Open the Qubo App.
3. Log in using your account credentials.
4. Select the Air Purifier you wish to control.

Scan the QR code for any product-related issues.

For Assistance: WhatsApp us on +91 8766205724 | quboworld.com/support