ClearClick® AM/FM Retro Radio with BT (Model #VR40)

5-Year Warranty & Free USA-Based Tech Support

This product comes with a 5-year warranty and free USA tech support from ClearClick®. As a small business, ClearClick® is here to serve you! If you have any issues with your product, please contact them at support@clearclick.tech.

Visit www.ClearClick.tech for more information.

Register Your Product & Browse Our Products

Thank you for your purchase! Make sure you register your product and check out ClearClick®'s other unique & easy-to-use technology at: www.ClearClick.tech.

Safety Precautions

1. Do not disassemble the unit.
2. Do not operate the unit around water or rain. Do not operate the unit around any kind of machines or appliances (other than computers).
3. Turn off and unplug the unit when not in use.
4. Do not allow young children to use this device.

Thank You!

Thank you for your purchase of the ClearClick® AM/FM Retro Radio! (Model Number VR40) ClearClick® appreciates your business.

At ClearClick®, the goal is to make technology as clear to understand and use as possible. If you get stuck at any point, you qualify for FREE USA-based tech support as a ClearClick® customer. Just email them at: support@clearclick.tech.

Please explain your issue in detail and mention that you are using the ClearClick® AM/FM Retro Radio. Their USA-based tech support team members will normally reply to you within 24-48 business hours.

QUICK START – Listening To AM/FM Radio

1. Plug the power adapter into the back of the radio. Plug the other end into any electrical outlet.
2. Switch the left knob to either "AM" or "FM."
3. Turn on the radio by turning the VOLUME (ON/OFF) knob clockwise.
4. Use the tuning knob to select your desired radio station.
5. Use the volume control knob to adjust the volume. NOTE: To improve the reception of your radio, adjust the pigtail antenna in the back of the radio.

QUICK START – Playing Music via Bluetooth

1. Plug the power adapter into the back of the radio. Plug the other end into any electrical outlet. Turn on the radio with the Volume/On/Off knob.
2. Switch the left knob to "BT." (Bluetooth mode) The Bluetooth indicator LED will light up blue.
3. On your phone, tablet, or other Bluetooth device, turn on Bluetooth and scan for devices. Connect to the "Vintage Radio" device.
4. Use the volume control knob to adjust the volume. (Note: You may also need to adjust the volume on your phone or tablet.)

Radio Diagram

The ClearClick® AM/FM Retro Radio features a vintage-style wooden cabinet design. The front panel includes control knobs and a tuning dial. The top front features a speaker grille.

Key components are labeled as follows:

• 1. Bluetooth indicator LED: Indicates Bluetooth connection status.
• 2. Function switch knob: Selects between AM, FM, and Bluetooth (BT) modes.
• 3. Tuning knob: Used to select radio stations.
• 4. Power ON/OFF and volume control knob: Turns the radio on/off and adjusts the volume level.
• 5. Speaker: Outputs the audio.

FCC Warnings

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Need Help?

If you need help with anything, ClearClick® is here to assist! Email them at: support@clearclick.tech.

Visit www.ClearClick.tech.