INSTALLATION /OWNER'S MANUAL CUBE-2025WM
INSTALLER: LEAVE THIS MANUAL WITH THE APPLIANCE. CONSUMER: RETAIN THIS MANUAL FOR FUTURE REFERENCE.
Version:202308
TABLE OF CONTENTS
Please read and carefully follow all of the instruction found in this manual. The instructions included here will assure that you have many years of dependable and enjoyable service from your Amantii product.
Contents
IMPORTANT INSTRUCTIONS.........................................................................................................................................3 FCC CAUTIONS ..................................................................................................................................................................4 UNPACKING AND TESTING THE APPLIANCE ..........................................................................................................5 GROUNDING THE APPLIANCE......................................................................................................................................5 LOCATING THE FIREPLACE...........................................................................................................................................5 CUBE-2025WM .................................................................................................................................................................... 6 INSTALLATION WALL-MOUNT ....................................................................................................................................7 INSTALLATION CUBE-BASE-LEGS ..............................................................................................................................8 INSTALLATION CUBE-BASE-SPEAKER......................................................................................................................9 OUTDOOR INSTALLATION...........................................................................................................................................10 MANTEL CLEARANCE...................................................................................................................................................10 HARDWIRE INSTALLATION ........................................................................................................................................11 MEDIA OPTIONS ..............................................................................................................................................................12 DECORATIVE MEDIA INSTALLATION......................................................................................................................12 OPERATION ....................................................................................................................................................................... 13 MANUAL OPERATION ...................................................................................................................................................13 REMOTE CONTROL OPERATION................................................................................................................................14 WIFI OPERATION.............................................................................................................................................................17 REPLACEMENT PARTS..................................................................................................................................................20 EXPLODED VIEW ............................................................................................................................................................21 TROUBLE SHOOTING.....................................................................................................................................................22 SERVICE HISTORY..........................................................................................................................................................23 WARRANTY ......................................................................................................................................................................24
QR Code
2
IMPORTANT INSTRUCTIONS
PLEASE RETAIN THIS USER GUIDE FOR FUTURE REFERENCE When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
1) Read all instructions before using this fireplace 2) The fireplace is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
Keep combustible material such as furniture, cushions, bedding, paper, clothes, curtains at least 3 feet from the front of the unit 3) Extreme caution is necessary when any heater is used near children and whenever the unit is left operating and unattended. 4) Do not operate a fireplace with a damaged cord or plug, or if the heater has malfunctioned, the fireplace has drooped or damaged in any manner 5) Not all fireplaces are suitable for use in bathrooms or laundry facilities. Please consult with individual product literature to confirm suitability 6) Do not run the cord under carpeting. Do not cover cord with throw rugs, runners or the like. Arrange the cord away from traffic area and where it will not be tripped over 7) Do not modify this fireplace. Use it as described in the manual. Any other use not recommended by the manufacture may cause fire, shock or injury to persons 8) Do not use this heater with programmer, timer, separate remote-control system or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly 9) Disconnect all power supply before cleaning, maintenance or relocation of the fireplace 10)Keep the heater clean. Do not allow any objects to enter any ventilation or exhaust opening as this may cause electric shock, fire or damage to the heater 11)Do not immerse the cord, plug or any part of the appliance in water or any other liquid 12)In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device
SAVE THESE INSTRUCTIONS CAUTION: Procedures and techniques, which, if not carefully followed, will result in damage to the equipment.
WARNING: Procedures and techniques, which, if not carefully followed, will expose the user to the risk of fire, serious injury, illness or death.
Consult with professional electrician and adhere to all code requirements for installations in bathrooms
3
FCC CAUTIONS
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
4
UNPACKING AND TESTING APPLIANCE
Carefully remove the appliance from the box. Prior to installing the appliance, test to make sure the appliance operates properly by plugging the power supply cord into a conveniently located 120 Volt grounded outlet. Test all aspects of its operation (manual switches, remote and heater) to make sure all components operate correctly. As with most electronic devices, your new electric fireplace has been designed to operate at temperatures between 5 (41) and 35(95). During the cold winter months, allow the fireplace to reach room temperature before turning it on. NOTE: There may be trace of odor during the first few minutes of initial use. This is harmless, normal and will never occur again.
GROUNDING APPLIANCE
This appliance is for use on 120 Volts. The cord has a plug as shown in (A). An adapter as shown in (C) is available for connecting three-blade grounding type plugs to two-slot receptacles. The green grounding lug extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box. The adapter should not be used if a three-slot grounded receptacle is available. To disconnect appliance, turn controls to off, then remove plug from outlet.
Note : Adaptor are NOT for use in Canada
LOCATING THE FIREPLACE
Plan where to locate and frame the fireplace. This will save time and money later when you install the fireplace. Before installation consider the following: 1. Where the fireplace is located must allow for wall and ceiling clearances. 2. Consider a location where the fireplace screen will not be exposed to direct sunlight from
windows or doors. 3. A 15 ampere, 120 Volt, 60 Hz branch circuit with proper ground must be available at the
location. Preferably a dedicated branch circuit should be provided to avoid circuit breakers to trip of fuses to blow.
5
CUBE-2025WM
Description Voltage Watts NO HEATER MOTOR HEATER Appliance Width Appliance Height Appliance Depth Gross Weight Plug Location Cord Length BTU
ELECTRIC FIREPLACE
120V AC 60Hz 1500W Max 11W 19W 19 5/8" or 50 cm 25 1/4" or 64.1 cm 11 3/4" or 30 cm 48.5 lbs or 22 kgs Left side 70 7/8" or 180 cm 5118
This appliance has been tested in accordance with the UL Standard 2021 for fixed and location dedicated electric room appliances in the United States and Canada. If you need assistance during installation, please contact your local dealer.
NOTE: This appliance must be electrically wired and grounded in accordance with local codes. In the absence of local codes, use the current CSA C22.1 Canadian Electrical Code in Canada or the ANSI/NFPA 70 National Electrical Code in the United States.
6
INSTALLATION WALL-MOUNT
NOTE: Due to the many different materials used on different walls, it is highly recommended that you consult your local builder before you install this appliance.
1. Select a location that is not prone to moisture and is located at least 0.91 m or 3 feet away from combustible materials such as curtains or drapes, furniture, bedding, paper, etc.
2. Select a suitable position in which to mount
the heater horizontally use a spirit level to
achieve this (Fig. 1).
Fig. 2
3. Check the wall to ensure there is no wiring, pipe wires etc. in the area to be drilled. Drill
8 or more pilot holes (8mm diameter & 40mm depth) using a suitable size drill and
put the wall plugs into the holes.
4. Take out the hanger from the fireplace by
unscrew the screw (Fig.2).
5. Fix the hanger to the wall. Referring to Fig. 3. 6. Avoid fireplace to move, use screw fix
fireplace to wall (Fig. 4). Warning!
Be sure that the bolts have been fixed
firmly enough to withstand the weight
Fig.3
Fig. 1
Fig. 4 7
INSTALLATION CUBE-BASE-LEGS
1. Screw the base legs to the steel panel.
3. Place the unit onto the base leg and screw in the adjustable feet, fixing the unit and the base leg.
2. Unscrew the adjustable feet from the bottom of the unit.
4. You have completed the installation of the CUBE-BASE-LEGS.
8
INSTALLATION CUBE-BASE-SPEAKER
1. Unscrew the adjustable feet from the unit.
3. Place the unit on the CUBE-BASE-SPEAKER and screw in the adjustable feet, fixing the unit and the speaker box.
2. Unscrew the rear screws and remove the back steel panel
4. Plug into the back of the unit. Re-install the back steel panel.
9
INSTALLATION OUTDOOR
CUBE electric fireplaces are suitable for installation in outdoor areas protected from direct water impingement. In addition to maintaining the listed mantel and combustibles clearances, a rain protection overhang factor of 1/2 shall be constructed to the front and to each side of the installed appliance. See illustration below. All wiring connections to line power shall be in accordance with local building code requirements.
NOTE: The CUBE Wall Mount Unit is approved for outdoor use. The Cube Speaker Base and Cube Leg Base are NOT approved for use outdoors.
The overhang (A) must extend at least 1/2 the roof-line height (B). Height is measured from the base of the fireplace. For example: if the roof-line (B) is 8' above the base of the fireplace, the overhang (A) must be at least 4'.
MANTEL CLEARANCE
The clearance to the mantel should be 6" minimum when a mantel is applied (Measurement is taken from the glass front).
Wall (Combustible facing allowed) Fireplace
Mantel
6"
Fireplace
Floor
10
HARDWIRE INSTALLATION
Turn off the appliance completely and let cool before servicing. Only a qualified technician should service and repair this electric appliance. If it is necessary to hard wire this appliance, a qualified electrician must remove the cord connection, and wire the appliance directly to the house hold wiring. This appliance must be electrically connected and grounded in accordance with local codes, if hard wired. In the absence of local codes, use the current CSA C22.1 CANADIAN ELECTRICAL CODE in Canada or the current ANSI/NFPA 70 NATIONAL ELECTRICAL CODE in the United States. 1. Remove the cover plate from the left side of the appliance by removing the two screws, as
shown below. Unscrew and remove power cord.
2. Attach the wiring to the junction block. Please make sure the live wire goes into the "L", the neutral wire into "N" and the ground wire into "G".
3. Replace the steel plate and screws.
11
MEDIA OPTIONS
The media that come with this appliance are Birch Log Set, "Clear glass", Amber glass, one (1) bag of Black Vermiculite and one (1) bag of White Vermiculite. Consumers may purchase optional decorative media if they choose. See dealer for more details.
STEP 3: Remove the front glass panel to decorate your fireplace. Pour the decorative media into the tray. Feel free to use any combination of fire glass media that you find most appealing.
Birch log set
Clear glass Amber glass Vermiculite
MEDIA INSTALLATION
STEP 1: Unplug the unit and make sure controls are switched off.
STEP 2: Unscrew 2 adjustable screws that securing the front glass panel. (Always secure the front glass before unscrewing the securing screws, removal of the securing screws may cause the front glass to fall out suddenly)
STEP 4: After finishing decoration, re-install the front glass panel using the securing screws removed in step 2.
adjustable screws 12
OPERATION
The Fireplace operates by using either the touch panel located on the upper left hand corner or by remote control. Plug the fireplace into a 15 Amp wall socket.
MANUAL OPERATION
1. Press to turn on and off the fireplace. 2. Press to adjust the flame brightness. There are 6 brightness levelsL6-L1 and
an off(OF) position. Each time the flame button is pressed, the brightness of the flame decrease. press the flame button for 10 seconds, the timing indicator light on and will rapidly blinks, at this time, You can use the TuyaSmart APP to connect to the fireplace.
3. Press
to adjust the ember Bed /Moodlight brightness. There are 11 brightness.
levels (d11-d2), dynamic condition(d1) ,and the OFF(OF) setting you can cycle through.
4. Press to set the turn-off time, 30min-1h-2h-3h-4h-5h-6h-7h-8h-t0. The indicator light the current timing. If the timing in off position, the second press will show 30. Multiple times to set operating duration to OF, 30 min, 1h, 2h, 3h, 4h, 5h, 6h, 7h, 8h.
5. Press or the first time to display the current setting temperaturepress the button again to clear the current temperature. If the heater in off position, the second press will show 22(72).Multiple times to set ambient temperatures at 22( 72) , 23 (74) ,24( 76) , 25( 78) , 26( 80) , 27( 82) , 28( 84) ,15( 52) , 16( 54) , 17( 56) ,18( 58) , 19( 60) , 20( 62) , 21( 64) . Temperature unit convert functionZ When the heater is on, press and hold the" " Button for 5 seconds, current temperature unit display will convert to another temperature unit.
13
REMOTE CONTROL OPERATION
For remote to function make sure the fireplace is plugged in and the remote has batteries.
Important: When operating the remote make sure you point the remote to the center of the fireplace. Each time you press the button, the buzzer inside the unit will beep once. It takes some time for the receiver to respond to the transmitter. Do not PRESS the buttons more than once within two seconds for correct operation.
Set the current time of the remote control
Press the
to activate the remote control and press to set
the time and date.
When one of the "Sun" "Mon" " Tue" "Wed" "Thu" "Fri" "Sat" is flashing, press or to
set the day of the week, press to confirm day of the week and then enter hour setting.
Press or to set the hour, press to confirm the hour and then enter minute
setting. Press
or to set the minute and press
to confirm the minute and
finish time setting.
Press this Power button to turn on and off the fireplace.
Press this Timer button to set the time to turn off the fireplace.
The available settings range from 30 minutes to 8 hours. As
shown in the following: 0:30 - 1:00 - 1:30 - 2:00 - 2:30 - 3:00 -
3:30 - 4:00 - 4:30 - 5:00 - 5:30 - 6:00 - 6:30 - 7:00 - 7:30 - 8:00.
Once you have set the timer, the
icon will be displayed
on the LCD screen of the remote control. Press this button
again to cancel the timer setting and the icon disappears.
Each time the Heater Button is pressed, the power of the heater will change. As shown the following: H1- H2AUTO22- OFFno display H1 means the firepalce on Low Heat/750W. H2 means the fireplace on High Heat/1500W.
14
AUTO means fireplace can automatically adjust to the temperature you set. When in AUTO, you can set the desired temperature with or keys. You can switch temperature between Celsius and Fahrenheit with or keys.When it is on Auto mode,fireplace operate at 1500W.
Press this button to adjust the speed of the flame. There are 3 options: HighMedium- Low.
The Ember bed /moodlight Button turn the ember bed or moodlight on and off.When in on position,the display screen of the remote control shows AD1.,when the number"1"flash,you can set the color with or keys. There are 10 different colors (AD1-10) and dynamic condition(AD11) to choose from.
Press the Flame button to turn on and off the Flame. When in ON position, the LCD
screen of the remote control shows 6 6 6. Press
or
or
to change
the brightness of each color flame.
7 Day Timer Function
Press once, 7 days from Monday to Sunday will display on the LCD screen of
the remote control, press within 5 seconds to enter 7 day timer function. When
"Sun" flashes, press or to select the day that you want to set, press to
confirm your setting. Then "ON" will be display on the LCD screen of the remote
control, at the same time, digital of time hour flashes, press or to set the
time to turn the fireplace on. After setting the startup time, "OFF" will be displayed on
the LCD screen and press
or
to set the shutdown time. When the
shutdown time's set, "AUTO" will be displayed on the LCD screen of the remote
control and the digital of temperature flashes. At this time, you can set the
temperature by
or . Now, you have finished setting of this function.
15
When the 7 day timer's set, the icon
will be displayed on the LCD screen of the
remote control. Press
again to cancel the 7 day timer and the icon
will disappears.
NOTE: If the 7 day timing and the general timing are set at the same time, the
system will respond to an earlier shutdown time.
Press Refer button to check the settings of 7 day timer. Press or to see the
settings of the day of the week and
or the settings of the startup and
shutdown time.
16
WIFI OPERATION INSTALL TuyaSmart life
There are 2 ways to install TuyaSmart; 1. Search for "TuyaSmart life" in the APP store on your phone, download and install. 2. Scan the QR code below with your mobile phone.
WIFI SETTING AND FIREPLACE OPERATION
1. Create an account and log in. 2. When you log in, touch "+" (FIG.1) to enter in FIG.2. Touch "others" on the left corner first
and then choose "Connector (Wi-fi)" to enter in FIG.3 to set your Wi-fi account and password.
FIG.1
FIG. 2
17
FIG.3
FIG.4
3. Press
(flame button) on the touch panel of the fireplace for more than 5 seconds
when the fireplace in standby mode. There will be 2 beeps come out from the fireplace
and the
(flame button) will flash as well indicating that Wi-fi is in EZ mode. Then
please confirm to go next. (FIG.5)
4. The APP will scan (FIG.6) and add the fireplace to APP (FIG.7) automatically. Please
make sure the Wi-fi account and password you set are correct and Wi-fi signal is good.
5. Touch "Done" to finish Wi-fi setting.(FIG.7)
FIG.5
FIG.6
FIG.7
18
6. Now you are in the interface like FIG.7. You can operate the fireplace via Wi-fi.
FIG.7
NOTE: Turn off the flashing blue Wifi indicator light
Touch the
(power button) once, the blue light will stop flashing.
19
REPLACEMENT PARTS
There is a QR code where the arrow is marked in below image (The QR code is on the left top behind the front glass). Scan the code to get the replacement parts list for your reference. You will get a detailed parts list with images.
*There is a QR code in page 2 of the manual, at the bottom of the table of contents.
20
EXPLODED VIEW
21
TROUBLE SHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
Dim or no flame
Flame LED's are burnt out.
Inspect the LED's and replace them if
necessary.
Back black cloth is falling off
Change a flicker and back black cloth.
and rolled up in the flicker.
Ember bed is not Ember LED's are burnt out
Inspect the ember bed LED's and
glowing or dimming
replace them if necessary.
Appliance turns off and Appliance has overheated, and Turn off the main switch, allow
will not turn on
safety device has caused the
appliance to cool for 10 minutes,
thermal switch to disconnect. turn back on.
House circuit breaker has Reset house circuit breaker.
tripped.
Appliance's fuse has blown.
Replace the fuse.
Appliance will not come Appliance is not plugged into an Check plug and plug in.
on when switch is electrical outlet.
flipped to ON
Appliance has overheated and Turn off the main switch, allow
safety device has caused the
appliance to cool for 10 minutes, turn
thermal switch to disconnect. back on.
Circuit board is burnt out.
Inspect the circuit board and replace
it if necessary.
No warm air coming out Heater is burnt out.
Inspect the burner and heater
of appliance
assembly and replace it if necessary.
Flame sputters
Flame motor is defective.
Call a qualified service technician and
replace flame motor.
Remote Control does Low batteries.
Replace AAA batteries in remote
not work.
Unit switch in "O" position.
control.
Turn the switch in "I" position.
Flame is fixed.
Wiring may be loose or the
flame motor may be defective.
22
SERVICE HISTORY
Date
This heater must be serviced annually depending on usage.
Dealer Name
Service technician Service Performed Name
Special Concerns
NOTES:
23
ELECTRIC FIREPLACE WARRANTY
FOR PRODUCTS MANUFACTURED AFTER JANUARY 1, 2016
Amantii Imports Corp. ("Amantii") warrants that your newly purchased Amantii electric fireplace is free from manufacturing and material defects for a period of two (2) years from the date of the first purchase, subject to the conditions and limitations contained below.
WARRANTY APPLICATION & EXCLUSIONS This limited warranty applies to your newly purchased Amantii electric fireplace; the limited warranty's application is limited to purchases made in any province of Canada or in any of the 52 States of the United States of America, including the District of Columbia. Only the original purchaser of the product is eligible for coverage under this limited warranty; the warranty is not transferable.
PRODUCTS EXCLUDED FROM THIS LIMITED WARRANTY Light bulbs are not covered by this limited warranty and are the sole responsibility of the owner/purchaser.
WARRANTY COVERAGE AND TERM Products covered by this limited warranty have been tested and inspected prior to shipment and, subject to the provisions of this warranty, Amantii warrants such products to be free from defects in material and workmanship for a period of two (2) years from the date of the first purchase of such products.
The limited two (2) year warranty period for products also applies to any implied warranties that may exist under applicable law. Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to the purchaser.
All other warranties--expressed or implied--with respect to the product, its components and accessories or any obligation/ liabilities on the part of Amantii are hereby expressly excluded.
WARRANTY COVERAGE AND TERM - BESPOKE SERIES Products covered by this limited warranty have been tested and inspected prior to shipment and, subject to the provisions of this warranty, Amantii warrants such products to be free from defects in material and workmanship for a period of five (5) years from the date of the first purchase of such products.
The limited five (5) year warranty period for products also applies to any implied warranties that may exist under applicable law. Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to the purchaser.
All other warranties--expressed or implied--with respect to the product, its components and accessories or any obligation/ liabilities on the part of Amantii are hereby expressly excluded.
LIMITATIONS TO COVERAGE UNDER LIMITED WARRANTY This limited warranty does not apply to products that have been repaired, except by Amantii or its authorized service representatives, or otherwise altered. This limited warranty further does not apply to defects resulting from misuse, abuse, accident, neglect, incorrect installation, improper maintenance or handling, or operation with an incorrect power source. Products made by other manufacturers, sold with the product or thereafter, are not covered by this limited warranty. The use of unauthorized components will render this warranty null and void.
PANORAMA OUTDOOR UNITS All Panorama units that are installed outdoors or in moisture intense conditions must use the stainless steel cover. Proof of purchase of the cover is required for any warranty claims.
SERVICE UNDER LIMITED WARRANTY Defects must be brought to the attention of Amantii Technical Support by contacting Amantii at (1.877.850.9458), or at 502-1027 Davie Street, Vancouver, BC V6E 4L2. Please have your proof of purchase, catalogue/model and serial numbers available when calling; any and all service under the limited warranty requires a proof of purchase of the product.
DEFECTS Should a product or part covered by this limited warranty be proven to be defective, in material or workmanship, and during the two (2) year limited warranty period, Amantii will replace such defective product or part without charge. If Amantii is unable to replace such product, or if replacement is not commercially practicable or cannot be timely done, in its sole discretion Amantii may, in lieu of replacement, choose to refund the purchase price for such product or part.
24
www.amantii.com
Revised -01.01.22AC
ELECTRIC FIREPLACE WARRANTY
FOR PRODUCTS MANUFACTURED AFTER JANUARY 1, 2016
APPLICATION OF PROVINCIAL AND STATE LAW This limited warranty gives you specific legal rights, and you may also have other rights which vary from jurisdiction to jurisdiction. The provisions of the United Nations Convention on Contracts for the Sale of Goods shall not apply to this limited warranty or the sale of products covered by this limited warranty.
GENERAL Amantii reserves the right to make changes at any time without notice, in design, material, specifications, prices and the right to discontinue styles and products.
GLASS This limited warranty does not apply to the following glass products:
Model Type
Panorama /Symmetry Wall Mount/ Insert
Traditional Zero Clearance/ FS Freestand
Tray Glass
Front Glass
Back Glass
EXCLUSION OF BATTERIES Ocean carriers have set new rules designed to protect the safety of shipments while in transit. This new rule disallows the inclusion of lithium/alkaline batteries, as a result we will no longer be including batteries with the fireplace remote.
REPLACEMENT MOTORS With the reliability of the components used in the construction of our electric fireplaces, a complimentary replacement motor will no longer be included inside the carton containing the fireplace.
25
www.amantii.com
Revised - 01.01.22AC
Technical Support: 877.850.9458 - Ext 5 Customer Service: 877.850.9458 - Ext 1
Or Email us at: cdn-service@amantii.com
26
cpdf non-commercial use only. To buy: http://coherentpdf.com/ Doro PDF Writer [2.10] [http://www.the-sz.com/]
Amantii CUBE-2025WM Electric Fireplace Installation and Owner's Manual Comprehensive guide for installing and operating the Amantii CUBE-2025WM electric fireplace, covering safety, setup, features, troubleshooting, and warranty. Includes detailed instructions for wall-mount, base leg, and base speaker installations, manual and remote operation, Wi-Fi connectivity, and maintenance.
Amantii CUBE-2025WM Electric Fireplace Installation and Owner's Manual Comprehensive installation and owner's manual for the Amantii CUBE-2025WM electric fireplace, covering setup, operation, maintenance, and troubleshooting. Includes details on wall mounting, base installations, remote and Wi-Fi operation, and warranty information.
Amantii CUBE-LUMINA Electric Fireplace Installation and Operation Manual Comprehensive guide for installing and operating the Amantii CUBE-LUMINA electric fireplace, including safety information, installation steps for wall-mount, base legs, and speaker base, operation via manual controls, remote, and Wi-Fi, troubleshooting, and warranty details.
Amantii CUBE-2025WM Electric Fireplace: Installation and Operation Manual This manual provides comprehensive installation and operation instructions for the Amantii CUBE-2025WM electric fireplace. It covers safety precautions, setup procedures, media options, operation modes, remote control usage, troubleshooting, and warranty information.
