ℹ️ Document Conversion Notice: This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.

Wicked Brick Riser Kits

Instructions for Assembly

Important Notes ?

All acrylic parts have protective film applied on both sides. Some pieces may appear with slightly translucent film; this will need to be removed before assembly. Ensure all engraved lines face outwards.

Part Type List

These instructions cover the basic directions for the majority of Wicked Brick's display case products. More specific details will be found on your chosen product's website listing.

1 - PRT1: A flat rectangular base piece with slots on the sides.
2 - PRT2: A U-shaped piece with two vertical supports and connecting tabs.
3 - PRT3: A longer, narrower U-shaped piece with vertical supports and connecting tabs.
4 - PRT4: A short, wide piece with connecting tabs on the sides.
5 - PRT5: A larger, multi-level structure piece with multiple slots and supports.
6 - PRT6: A long, flat piece with raised edges and slots.
7 - PRT7: A long, flat piece with raised edges and slots, similar to PRT6.
8 - PRT8: A long, flat piece with raised edges and slots, similar to PRT6/PRT7.
9 - PRT9: A short, flat piece with connecting tabs on the sides.
10 - CPT3 (3 x packs): Connector pieces or feet, indicated by a small icon representing multiple items.

Assembly Steps

These risers can be used in various configurations, either on their own, together, or in combination with other products from the Wicked Brick riser line.

Step A: Initial Assembly

Diagram A shows parts 4, 2, and 9 being connected. Part 4 connects to the base of part 2, and part 9 attaches to the side of part 2.

Step B: Adding the Base Plate

Diagram B shows part 1 being placed on top of the assembly from Diagram A, connecting to the upper tabs of part 2.

Step C: Forming a Longer Base

Diagram C shows two long, flat pieces (likely PRT6/PRT7/PRT8) being connected to form a longer base structure.

Step D: Alternative Configuration

Diagram D illustrates a structure similar to Step C, but with additional support pieces or a different configuration, suggesting versatility in assembly.

Step E: Multi-Tiered Riser

Diagram E depicts a multi-tiered riser structure, potentially combining elements from previous steps or different parts to create a stacked display.

Dimensions and Specifications ?

Width by Depth Measurements for Current Risers

The following chart details the available dimensions for the riser kits:

Width	Depth Options
216 mm	51 mm, 102 mm, 153 mm, 204 mm
324 mm	51 mm, 102 mm, 153 mm, 204 mm

Height Measurements for Current Risers

The available heights for the riser kits are:

35 mm
70 mm
105 mm

Google Docs
Google Drive
Download [pdf]

File Info : application/pdf, 4 Pages, 1.02MB

v1 Adobe PDF library 17.00 Adobe Illustrator(R) 24.0

Related Documents

	Wicked Brick LEGO Balrog Book Nook (10367) Display Case Assembly Instructions Step-by-step assembly instructions for the Wicked Brick display case designed for the LEGO Balrog Book Nook (10367). Includes parts list and assembly guidance.
	Wicked Brick LEGO Imperial Star Destroyer 75252 Display Case Instructions Detailed assembly instructions for the Wicked Brick display case designed for the LEGO Imperial Star Destroyer set 75252, including a parts list and step-by-step guidance for a secure and clear display.
	Wicked Brick IKEA Billy Bookcase Window Front Assembly Instructions Assembly guide for the Wicked Brick IKEA Billy Bookcase Window Front, detailing parts, assembly steps, and compatibility with various IKEA Billy Bookcase configurations.