RUNSKÄR Faucet Installation and Usage Guide
Introduction
This guide provides instructions for the installation, use, and maintenance of the IKEA RUNSKÄR faucet.
Installation Compliance: Installation must be performed in compliance with current local construction and plumbing regulations. If in doubt, contact a professional.
⚠️ Important Safety: Switch off the main shut-off valve before changing the mixer tap.
⚠️ Important Handling: Do not tighten too hard: this can damage hoses/pipes and washers.
Parts and Tools
Tools Required:
- Screwdriver
- Wrench
Included Parts: The faucet assembly includes various components such as flexible hoses, mounting hardware, handles, and an aerator. Specific part identifiers are shown in the product diagrams (e.g., 124405, 10056115).
Assembly Instructions
Follow the step-by-step diagrams for proper assembly:
- Connect the flexible hoses to the faucet body.
- Insert the faucet through the sink or countertop mounting hole.
- Secure the faucet from underneath using the provided mounting bracket and hardware.
- Connect the flexible hoses to the appropriate hot and cold water supply lines.
- Ensure all connections are snug but avoid overtightening to prevent damage.
Refer to the visual diagrams in the original document for detailed step-by-step guidance.
Technical Specifications
| Specification | Value |
|---|---|
| Max. Water Temperature | 80°C (176°F) |
| Operating Water Pressure | 1-5 bar (14.5-72.5 psi) |
| Max. Water Pressure | 10 bar (145 psi) |
| Connection Size | G3/8" (R10) |
Before First Use
Before using the faucet for the first time, unscrew the aerator/flow guide. Allow water to run freely for a few minutes to flush out any debris. Then, screw the aerator/flow guide back into place, ensuring it is sufficiently tightened to prevent it from being removed by hand.
Maintenance
Periodically check the installation to ensure there are no leaks.
Product Details
Brand: IKEA
Model: RUNSKÄR
Product Type: Bathroom Faucet / Mixer Tap
Designed and Quality IKEA of Sweden.
