SUNLU S1 Plus Filament Dryer: Installation and User Guide

This document provides instructions for the SUNLU S1 Plus Filament Dryer, designed to maintain optimal dryness for 3D printing filaments.

About the SUNLU S1 Plus Filament Dryer

The SUNLU S1 Plus is an advanced filament dryer box that helps preserve the quality of 3D printing filaments by removing moisture. Proper filament storage is crucial for achieving high-quality prints and preventing issues like stringing, poor layer adhesion, and brittleness. This device is suitable for various filament types and sizes, including 1.75mm, 2.85mm, and 3.00mm diameters.

Key Features

Built-in circulation fan for uniform heat distribution and efficient drying.
Adjustable temperature and time controls for customized drying cycles.
Supports filament spools of standard sizes (1.75mm, 2.85mm, 3.00mm).
Transparent cover allows visual monitoring of the filament during the drying process.
Compact and stable design for placement on work surfaces.

Important Safety Precautions

Please read the following safety guidelines before operating the SUNLU S1 Plus Filament Dryer:

✔️ Read This Document: Always read this manual before using the filament dryer.
✔️ Power Supply: Use only the power adapter supplied with the unit.
✔️ Environment: Keep the device away from water and moisture. Operate in a dry, well-ventilated area.
✔️ Supervision: Do not leave the device unattended during operation.
✔️ Heat: Avoid touching the interior surfaces immediately after use, as they may be hot.

Installation and Setup

Setting up the SUNLU S1 Plus Filament Dryer is straightforward:

Unpacking: Carefully remove all components from the packaging.
Placement: Position the dryer on a stable, flat, and heat-resistant surface. Ensure adequate space around the unit for ventilation.
Power Connection: Connect the provided power adapter to the dryer's power input port and plug the adapter into a suitable electrical outlet.
Filament Loading: Open the dryer's cover. Place the filament spool inside the chamber. Ensure the filament end is accessible.
Closing: Securely close the upper cover. Rotating the filament during the drying process will ensure a more thorough and evenly dried result. To avoid heat loss, ensure the upper cover is in place.

Operating the Filament Dryer

Follow these steps to dry your filament:

Power On: Press the power button to turn on the device.
Set Temperature: Use the temperature control dial or buttons to select the desired drying temperature. Recommended temperatures vary by filament type (e.g., 40-50°C for PLA, 50-60°C for PETG, 60-70°C for ABS). Consult filament manufacturer guidelines for specific recommendations.
Set Time: Use the time control to set the duration of the drying cycle. Typical drying times range from 4 to 12 hours, depending on filament moisture content and type.
Start Drying: Press the start button to begin the drying cycle. The fan and heating element will activate.
Monitoring: You can observe the filament through the transparent cover.
Completion: The dryer will automatically shut off when the set time is reached. Allow the unit to cool before opening the cover.

Maintenance and Care

To ensure the longevity and performance of your SUNLU S1 Plus Filament Dryer:

✔️ Cleaning: After the unit has cooled down, wipe the interior and exterior surfaces with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
✔️ Ventilation: Periodically check that the air vents are clear of dust and debris to maintain proper airflow.

Technical Specifications

Model: SUNLU S1 Plus

Compatible Filament Diameters: 1.75mm, 2.85mm, 3.00mm

Input Voltage: 100-240V AC, 50/60Hz

Output Voltage: 12V DC

Power Consumption: Approximately 36W

Operating Temperature Range: 35°C - 70°C

Dimensions: 235mm x 265mm x 115mm

Weight: 1.2 kg

	SUNLU FilaDryer S4 User Guide: Optimize Your 3D Printing Filament Comprehensive user guide for the SUNLU FilaDryer S4. Learn how to safely and effectively dry your 3D printing filaments for optimal results, including setup, operation, and troubleshooting.
	SUNLU FilaDryer S4 User Manual User manual for the SUNLU FilaDryer S4, providing instructions on setup, operation, functions, troubleshooting, and warranty information for drying 3D printing filament.
	SUNLU FilaDryer S4 User Guide for 3D Printing Filament Official user guide for the SUNLU FilaDryer S4, a device designed to dry and store 3D printing filaments, ensuring optimal printing quality. Learn about setup, operation, and maintenance.
	SUNLU FilaDryer S2: User Manual and Guide for Filament Drying Comprehensive user manual for the SUNLU FilaDryer S2, detailing setup, operation, personalized settings, troubleshooting, and tips for optimal 3D printing filament drying. Learn how to dry PLA, PETG, ABS, and more.
	SUNLU FilaDryer S2 3D Printing Filament Dryer User Manual Comprehensive user manual for the SUNLU FilaDryer S2, a 3D printing filament dryer. Learn about setup, operation, personalized settings, troubleshooting, and specifications for optimal filament drying.
	SUNLU FilaDryer S2 User Guide - Filament Drying and Storage Comprehensive user guide for the SUNLU FilaDryer S2, detailing its features for drying and storing 3D printing filaments. Includes setup, operation, and maintenance instructions.
	SUNLU FilaDryer S4 User Guide - 3D Printing Filament Dryer Comprehensive user guide for the SUNLU FilaDryer S4, a 3D printing filament dryer. Learn about setup, operation, troubleshooting, and recommended drying temperatures for various filament types.
	SUNLU FilaDryer S4 User Guide: Optimize Your 3D Printing Filaments Comprehensive user guide for the SUNLU FilaDryer S4, detailing setup, operation, recommended drying temperatures for various filaments, troubleshooting, and maintenance for optimal 3D printing results.