BISSELL SpotClean Pet Pro Plus & Auto Pro Select User Guide

Overview of Sections

• Assembly/Setup: Instructions for putting the machine together. ➡️ (Page 3)
• Filling Tanks: How to add clean water and cleaning solutions. ?+ (Page 4)
• Operation: Steps for using the machine. ⏻ (Page 5)
• Using the Cleaning Tool: Details on how to use the attached hose and nozzle. ✨✋ (Page 6)
• Emptying Dirty Water: How to dispose of used water. ?↘️ (Page 7)
• Machine Cleaning & Maintenance: Steps for cleaning the unit after use. ✨✋ (Pages 8-10)

Models covered: SPOTCLEAN PET PRO PLUS 37252, SPOTCLEAN AUTO PRO SELECT 3730N.

Section 1: Assembly and Setup

Follow these steps to assemble your BISSELL SpotClean machine.

Step 1: Connect Hose/Wand

Attach the hose and wand assembly to the main unit. (Diagram shows the hose connector being inserted into a port on the machine).

Step 2: Attach Base Component

Connect a component to the base of the machine. (Diagram shows a part clicking into place on the lower section of the unit).

Step 3: Attach Second Base Component

Connect another component to the base of the machine. (Diagram shows a different part clicking into place on the lower section).

Step 4: Lock Base Component

Rotate a locking mechanism on the base of the machine to secure the attached component. (Diagram shows a dial being turned clockwise).

Step 5: Secure Base Component

Rotate another locking mechanism on the base of the machine to further secure the component. (Diagram shows a lever being turned clockwise).

Section 2: Filling the Tanks

Prepare your machine by filling the clean water and solution tank.

Important Safety Information: ⚠️ ?

Maximum Water Temperature: 60°C

Clean Water/Solution Tank Indicator: ?+

Step 1: Remove Clean Water Tank

Lift the clean water tank from the machine. (Diagram shows lifting the tank upwards).

Step 2: Open Tank Cap

Remove the cap from the clean water tank. (Diagram shows unscrewing or lifting a cap).

Step 3: Add Cleaning Solution

Fill the tank with clean water and the recommended BISSELL cleaning formula.

• For general cleaning: Add 30mL of BISSELL Wash & Protect Pet, Spot & Stain Pro Oxy formula to the clean water tank. (Diagram shows liquid being poured from a bottle marked '30mL').
• For tougher stains: Add 60mL of BISSELL Wash & Protect Pet, Spot & Stain Pro Oxy formula to the clean water tank. (Diagram shows liquid being poured from a bottle marked '60mL').

Step 4: Secure Tank Cap

Replace the cap securely onto the clean water tank. (Diagram shows placing the cap back on).

Step 5: Reinsert Clean Water Tank

Reinsert the filled clean water tank back into the machine. (Diagram shows sliding the tank back into its housing).

Section 3: Operating the Machine

Follow these steps to operate your BISSELL SpotClean.

Power Button: ⏻

Step 1: Prepare Cleaning Formula

Ensure the correct cleaning formula is ready. (Diagram shows cleaning solution options labeled 'W').

Step 2: Connect Hose and Tool

Attach the cleaning hose and tool to the machine's designated port. (Diagram shows connecting the hose assembly).

Step 3: Adjust Machine Dial

Rotate a control dial on the machine to the appropriate setting. (Diagram shows turning a dial).

Step 4: Plug In Power Cord

Plug the machine's power cord into a standard electrical outlet. (Diagram shows a plug being inserted into a wall socket).

Step 5: Adjust Second Machine Dial

Rotate another control dial on the machine. (Diagram shows turning a dial).

Step 6: Adjust Third Machine Dial

Rotate a third control dial on the machine. (Diagram shows turning a dial).

Step 7: Final Hose Connection

Ensure the hose/wand assembly is securely connected to the machine. (Diagram shows connecting the hose).

Step 8: Power On Machine

Press the power button to turn the machine on. (Diagram shows pressing the power button).

Step 9: Clean Surface

Apply cleaning solution and suction by pressing the trigger on the cleaning tool while moving it over the stained area. (Diagram shows the cleaning tool on a carpet, with the trigger pressed).

Step 10: Continue Cleaning

Continue cleaning the affected area with the tool. (Diagram shows the cleaning tool moving across a carpeted surface).

Section 4: Using the Cleaning Tool

Detailed instructions for using the cleaning tool.

Step 1: Connect Hose and Wand

Ensure the cleaning hose and wand are properly connected to the machine.

Step 2: Adjust Control Dial

Adjust a control dial on the machine. (Diagram shows turning a dial).

Step 3: Spray Cleaning Solution

Spray cleaning solution onto the stain by pressing the trigger on the cleaning tool. (Diagram shows liquid spraying from the tool's nozzle onto a surface).

Step 4: Scrub Stain

Scrub the stain with the tool's integrated brush. (Diagram shows the brush action on a carpeted surface).

Step 5: Adjust Second Control Dial

Adjust another control dial on the machine. (Diagram shows turning a dial).

Step 6: Rinse Cleaning Tool

Rinse the cleaning tool under running water to remove any residue. (Diagram shows water flowing over the tool).

Step 7: Thoroughly Rinse Tool

Thoroughly rinse the cleaning tool under a faucet to ensure it is clean. (Diagram shows the tool being rinsed under a tap).

Section 5: Emptying the Dirty Water Tank

Properly empty and clean the dirty water tank after use.

Safety Warnings: ⚠️ ?

Emptying Indicator: ?↘️

Step 1: Unplug Machine

Ensure the machine is unplugged from the power outlet before handling the tank. (Diagram shows a power plug being removed from a socket).

Step 2: Remove Dirty Water Tank

Lift the dirty water tank from the machine. (Diagram shows lifting the tank upwards).

Step 3: Release Tank Lid Latch

Release the latch that secures the lid of the dirty water tank. (Diagram shows pressing a clip or lever).

Step 4: Remove Tank Lid

Remove the lid from the dirty water tank. (Diagram shows lifting the lid off the tank).

Step 5: Empty Tank Contents

Pour the dirty water from the tank into a sink or drain. (Diagram shows liquid being poured from the tank).

Step 6: Clean Tank and Lid

Clean the inside of the dirty water tank and its lid. (Diagram shows wiping the inside of the tank).

Step 7: Reattach Tank Lid

Place the lid back onto the dirty water tank. (Diagram shows placing the lid back on).

Step 8: Secure Tank Lid

Re-engage the latch to secure the lid onto the tank. (Diagram shows clipping the lid shut).

Step 9: Reinsert Dirty Water Tank

Reinsert the now empty and clean dirty water tank into the machine. (Diagram shows sliding the tank back into its housing).

Step 10: Ensure Tank is Seated

Ensure the tank is properly seated and secured within the machine. (Diagram shows pushing the tank firmly into place).

Section 6: Machine Cleaning and Maintenance

Follow these steps for thorough cleaning and maintenance of your machine.

Step 1: Plug In Machine

Plug the machine into a power outlet. (Diagram shows a power plug being inserted into a socket).

Step 2: Adjust Control Dial

Adjust a control dial on the machine. (Diagram shows turning a dial).

Step 3: Clean Cleaning Tool Nozzle

Clean the nozzle of the cleaning tool. (Diagram shows cleaning the nozzle of the tool).

Step 4: Adjust Second Control Dial

Adjust another control dial on the machine. (Diagram shows turning a dial).

Step 5: Clean Cleaning Tool Nozzle Again

Clean the nozzle of the cleaning tool again. (Diagram shows cleaning the nozzle of the tool).

Step 6: Rinse Cleaning Tool

Rinse the cleaning tool under running water. (Diagram shows water flowing over the tool).

Step 7: Thoroughly Rinse Tool

Thoroughly rinse the cleaning tool under a faucet. (Diagram shows the tool being rinsed under a tap).

Step 8: Remove Dirty Water Tank Lid

Remove the lid from the dirty water tank. (Diagram shows lifting the lid off the tank).

Step 9: Remove Dirty Water Tank

Remove the dirty water tank from the machine. (Diagram shows lifting the tank upwards).

Step 10: Empty Dirty Water Tank

Empty the dirty water tank into a sink or drain. (Diagram shows pouring liquid from the tank).

Step 11: Rinse Dirty Water Tank

Rinse the dirty water tank thoroughly. (Diagram shows rinsing the inside of the tank).

Step 12: Rinse Cleaning Tool

Rinse the cleaning tool under running water. (Diagram shows water flowing over the tool).

Step 13: Clean Brush Roll Area

Clean the brush roll area or other internal components as indicated. (Diagram shows cleaning a specific part of the machine, likely the brush housing).

Step 14: Attach Hose/Wand

Attach the hose/wand assembly to the machine. (Diagram shows connecting the hose).

Step 15: Rinse Cleaning Tool

Rinse the cleaning tool under running water. (Diagram shows water flowing over the tool).

Step 16: Allow to Dry

Allow all components to dry completely before storage. (Diagram shows a clock with '24h' indicating a drying period).

Step 17: Secure Dirty Water Tank Lid

Place the lid back onto the dirty water tank and secure it. (Diagram shows placing the lid and securing it).

Step 18: Secure Dirty Water Tank

Ensure the dirty water tank is properly secured in the machine. (Diagram shows securing the tank).

Step 19: Secure Dirty Water Tank Again

Ensure the dirty water tank is properly secured in the machine. (Diagram shows securing the tank).

Step 20: Reinsert Clean Water Tank

Reinsert the clean water tank into the machine. (Diagram shows placing the tank).

Step 21: Reinsert Clean Water Tank Again

Ensure the clean water tank is properly seated in the machine. (Diagram shows placing the tank).

Step 22: Attach Hose/Wand Assembly

Attach the hose/wand assembly to the machine. (Diagram shows connecting the hose).

Step 23: Connect Base Component

Connect a component to the base of the machine. (Diagram shows clicking a part into the base).

Step 24: Connect Second Base Component

Connect another component to the base of the machine. (Diagram shows clicking a part into the base).

Step 25: Connect Final Base Component

Connect a final component to the base of the machine. (Diagram shows clicking a part into the base).

Step 26: Rotate Base Lock

Rotate a locking mechanism on the base to secure the assembly. (Diagram shows turning a dial).

Step 27: Clean Exterior

Clean the exterior surfaces of the machine with a damp cloth. (Diagram shows wiping the machine's exterior).