READ AND SAVE THESE INSTRUCTIONS
INSTALLATION INSTRUCTIONS
Name of components
Diagram showing the fan components: The motor housing with a motor shaft extending from the top, a rear grill attached to the motor housing, a pole extending downwards from the motor housing, and a circular base at the bottom. A right-angle bolt is indicated for securing the pole to the base. Numbers 1, 2, and 3 indicate assembly steps.
- Motor shaft: Top part of the motor.
- Motor: The main body containing the fan motor.
- Rear grill: The protective cover at the back of the fan blades.
- Pole: The vertical support connecting the motor assembly to the base.
- Base: The stable foundation of the fan.
- Right-angle bolt: Used to secure the pole to the base.
- Tighten knob: A knob on the motor assembly for securing the pole.
Base Installation
Diagram illustrating the base installation: A circular base with a central opening and a pole with a corresponding groove. An arrow indicates aligning the pole with the groove on the base. A separate image shows the right-angle bolt being inserted to fix them together.
Align the column (pole) with the groove on the base and fix them together using a right-angle bolt.
Considerate Hint: Remove 1-2 parts from the component before performing installation.
Front and Rear Guard Installation
Diagrams showing the front and rear guards. One diagram shows aligning screw holes and a positioning clip. Another diagram shows pressing down buckles to fasten the guards and tightening a screw and nut.
- Align Screw Holes on the outer ring of both the Front and Rear Guards, with the Positioning Clip aligned as illustrated.
- Press down all the Buckles to fasten the Front Guard with the Rear Guard. At the Screw Holes, tighten the separated screw and nut.
Diagram illustrating the blade and grill installation steps: Step 4 shows a lock nut being screwed onto the motor shaft. Step 5 shows the fan blade being placed onto the shaft. Step 6 shows the blade lock nut being screwed onto the shaft to secure the blade. Step 7 shows the front grill being placed over the blade and secured with a grill lock nut.
Lock nut of blade
- Lock nut of blade anticlockwise, and then install the front fan cover.
Blade
- Pull the blade to rotate after installing, so as to ensure that the blade can be normally rotated.
Lock nut of grill
- Screw the lock nut of grill clockwise, and in the meantime, fix the rear grill.
INSTRUCTIONS FOR USE
Instructions for key of remote controller
Diagram of a remote controller with three buttons: 'SPEED' (fan icon), 'ON/OFF' (power icon), and 'TIMER' (clock icon). A separate diagram shows a battery compartment with two AA batteries.
- "SPEED" key: Adjusts fan speed.
- "ON/OFF" key: Turns the fan on or off.
- "TIMER" key: Sets the timer function.
Considerate Hint: Effective Range of Remote Control: within 5 m distance and 30-degree deflection in front of Product.
Instructions for display of body
Diagram showing the fan's body display panel with indicators for speed and timer settings. Speed display is represented by a fan icon. Timer display shows options like 1h, 2h, 4h.
- Speed display: Indicates the current fan speed setting.
- Timer display: Shows selected timer duration (e.g., 1 hour, 2 hours, 4 hours).
Instructions for operation of body
Diagram showing the fan's main body with callouts for various operational adjustments: Horizontal Swing, Tilt Adjustment, and Height Adjustment.
Body key
Horizontal Swing
Diagram showing a pull-knob mechanism for horizontal swing. Pull-up for static position, Push-down to enable swinging.
- Pull-up for static: Stops the fan from oscillating.
- Push-down to swing: Enables the fan to oscillate horizontally.
- Swing Pull-knob: The mechanism to control oscillation.
Tilt Adjustment
Diagram showing how to manually adjust the fan head's vertical tilt.
- Manual adjustment of the fan head's angle.
Height Adjustment
Diagram showing a height adjustment key on the fan pole. Turn counterclockwise to loosen for adjustment.
- Turn counterclockwise and loosen for performing height adjustment.
- Height Adjustment Key: The mechanism used to adjust the fan's height.
USER SERVICING INSTRUCTIONS
Diagram illustrating a polarized plug with a fuse access cover on top.
- Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
- Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades.
- Remove fuse carefully. Insert the tip of your tool into fuse slot (close with the terminal), then prize the fuse gradually and slowly, but not overexert. If you feel tight, you can try it at several times and prize the fuse little by little. When one side of the fuse has been prized, then you can get the fuse out entirely.
- Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.
- Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
- Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged.
Notice:
- When you replace the fuse, please don't operate suddenly or overexert, or else the product will be damaged or cause an accident.
- When you feel it hard to be operated, please make sure you have got the right way.
CLEANING
- Be sure to unplug from the electrical supply source before cleaning.
- Plastic parts should be cleaned with mild soap and a damp cloth or sponge. Thoroughly remove soap film with clean water.
- Be sure not to make water or other liquid enter inside of the motor.
SERVICE & SUPPORT
In the event of a warranty claim or if service is required for this fan, please contact Midea America Corporation at the following:
For your records, staple your sales receipt to this manual and record the following:
DATE OF PURCHASE: ________________________________________________
PLACE OF PURCHASE: ________________________________________________
(STAPLE SALES RECEIPT HERE)
NOTE: PROOF OF PURCHASE IS REQUIRED FOR ALL WARRANTY CLAIMS
Printed in China
