Vasco Beams Mono EL Mounting Instructions

General Mounting Requirements

Check the wall's load-bearing capacity. For safety reasons, wall plugs and screws are not supplied. Contact your dealer for the correct type of screws and plugs. Observe special requirements, such as for public buildings. Please respect the rules for electrical installation of the country where the product is installed. Mounting accessories are included in the packaging or inserted between the radiator pipes.

Diagram 1 Description: The diagram illustrates the mounting process. Step 1 shows checking the wall and selecting appropriate fixings. Step 2 indicates the 'Top' of the radiator. Step 3 details attaching a bracket (labeled 'B') to the radiator using screws (type DIN 571) and a component labeled 'A'.

The radiator dimensions are: height 1800 mm (H=1800) and 80 mm (H-80). Other indicated dimensions are 150 mm, 107 mm, 4 mm, 460 mm, 40 mm, 341 mm, and 75 mm. The cable length is approximately 800 mm (±800mm).

Installation Zones and Safety

Diagram 2 Description: This diagram shows bathroom safety zones (Volume 0, 1, 2, 3) relevant for radiator installation. Volume 0 is the area within the bath or shower tray. Volume 1 is the space directly above the bath or shower. Volume 2 is the area around the bath or shower. Volume 3 encompasses the rest of the bathroom.

The diagram illustrates the correct installation of the radiator. The radiator can be installed in Volume 2 or Volume 3 of a bathroom, provided the mounting position is beyond the arm's reach of anyone using the bath or shower. Ensure a minimum distance of 50 mm from any shelf or console placed above the radiator. The radiator does not require connection to an earth strap. Never install the radiator with the power cable oriented upwards. The radiator must be mounted vertically on a wall using the provided mountings and fastenings, maintaining a clearance of at least 150 mm from the floor.