Smart Boiler Water Heater Switch
Product Parameters
- Working voltage: AC 100-240V 50-60Hz
- Maximum load current/power: (20A/4400W) (40A/8800W)
- Product power consumption: 0.5W
- Working temperature: -10°C-60°C
- Shell material: PC flame retardant material
- Size: 120*72*32.5mm
Package Contents
- Smart switch*1
- Screw*2
- Manual*1
Features
- High-quality crystal tempered glass panel design, never fades.
- Blue LED indicator for clear visibility.
- Check and control the status of the Smart Switch via Mobile APP.
- Backlight indicator ON/OFF can be controlled by mobile APP.
- Option to set memory function for power-off/Power-on/memory of power-off state via mobile App.
- Compatible with incandescent lights, fluorescent lamps, LED lamps, water heaters, ventilators, and motors.
- Supports Amazon Alexa and Google Assistant.
Installation
Step 1: Remove Cover
Remove the cover with a small screwdriver ?.
Step 2: Open Window
Turn the key ? to open the window.
Step 3: Wiring
The wiring diagram illustrates connecting the 'N line' (neutral), 'L line' (live), and 'Water Heater' terminals. Ensure correct wire placement for safe operation.
Step 4: Fix to Wall
The diagram shows the switch unit being mounted into a wall box, indicating how to secure it to the wall.
Step 5: Cover and Power On
Cover the panel and connect the power. After the power is on, wait for 3 seconds before touching to activate the lamps. For touch testing without the glass panel cover, turn off the general power, install the glass panel, and then turn the general power back on.
APP Connection Operation Method
- Register an account in the app application.
- On the device, press any key for 5 seconds.
- The indicator light will flash quickly.
- Follow the instructions in the app to connect the smart touch switch to the WiFi network.
- Tap the "+" button in the upper right corner of the APP and select "Electrical - switch (BLE+Wifi)".
- After entering pairing mode, enter your WiFi network name and password, and follow the APP prompts to complete the operation.
How to Set Up with the Smart Life App
Using the Smart Life app can configure the switch more quickly, especially when the mobile phone's Bluetooth is turned on.
Configuration Mode 1
Power on the device and confirm the indicator is blinking slowly. Follow the APP's guidelines for configuration.
Configuration Mode 2
Hold any button on the panel for 5 seconds until the indicator blinks slowly. Follow the APP's guidelines for configuration.
Removing the Device
Solution 1: Remove the device directly from the APP interface.
Solution 2: Hold any button on the panel for 5 seconds.
Attention: The configuration mode exits after 3 minutes of no operation.
How to Set Up the 2-Way APP
This section details the 2-way APP settings and switch installation methods.
Switch Installation Methods
Switch 1: Normal wiring installation, which requires connecting to the bulb.
Switch 2: Installing with a neutral wire and live wire. This method does not require connecting to the bulb.
Power Outage Memory and Backlight Settings
Set the power outage memory function and control the button backlight to turn on/off via the app.
Warranty Information
Product requires professional installation by an electrician engineer. Non-professional personnel should not install it to avoid damaging the product.
Warranty Exclusions
- Unauthorized modification or alteration of the electronic control circuit.
- Disassembly of the internal electronic motherboard.
- Incorrect wiring connections.
- Damage to the switch, shell scratches, surface damage, and glass damage.
Warranty Period
The warranty period is 12 months.
