TAGRY X07 True Wireless Sports Headphones User Manual

Packing List

• Charging Case x1
• Earbuds x2
• Type-C Cable x1
• Ear Tips x3 (Sizes S, M, L)
• User Manual x1

Product Overview

The TAGRY X07 headphones consist of a charging case and two earbuds. Key components include:

• Charging Case: Houses and charges the earbuds. Features a battery level display and a Type-C charging port.
• Earbuds: Left [Left Earbud] and Right [Right Earbud] earbuds, each with a microphone, LED indicator, and multi-function button [MFB].
• Charging Contacts: On the earbuds and inside the case for power transfer.
• Microphone: For calls and voice commands.
• LED Indicator: On the earbuds to show status.
• Multi-function Button (MFB): For controlling music, calls, and voice assistant.
• Type-C Charging Port: Located on the charging case.

Note: Please remove protective films from the earbuds' charging points before use.

Product Parameters

• Model No.: X07
• Support Profile: HSP/HFP/AVRCP/A2DP
• Transmission Range: 33 feet (Without Obstacles)
• FCC ID: 2A58W-G17
• Charging Cord Type: Type-C
• Input: 5V 1A
• Charging Case Capacity: 600mAh 3.7V, 2.22Wh
• Earbuds Capacity: 50mAh 3.7V, 0.18Wh
• Weight: 0.22 lb
• Size: 4.2*2.8*1.3 in

First-Use

1. Before the first use, tear off the isolation film on each earbud.
2. Place both earbuds into the charging case.
3. Connect the charging case via USB-C cable and charge for 1 hour. Charge earbuds promptly when the battery is low.
4. The earbuds come with M-size eartips pre-installed. Select the most suitable size (S, M, L) for optimal sound and comfort.

How to Wear

1. Step 1: Choose suitable eartips. (Visual description: Three sizes of eartips labeled S, M, L are shown. The M size is on the earbuds.)
2. Step 2: Adjust earbuds downwards to a proper position and push them gently into your ears.
3. Step 3: Slightly adjust the earbuds to ensure a secure and comfortable fit.

Power On / Off

Auto Power On/Off

• Auto Power On: Remove the earbuds from the charging case. They will automatically power on and enter pairing mode. (Visual description: Earbuds being taken out of the case, with an indicator showing power on and alternating white/red light [white-red-alternating-light].)
• Auto Power Off: Place the earbuds back into the charging case. They will automatically power off and disconnect. (Visual description: Earbuds being placed into the case, with an indicator showing power off [light-off].)

Note: Earbuds will automatically power off after 5 minutes if they are powered on and in pairing mode without connecting to a device.

Manual Power On/Off

• Manual Power On: Long press either earbud for 2 seconds [2 seconds]. (Visual description: Finger pressing an earbud for 2 seconds, with an indicator showing power on and alternating white/red light [white-red-alternating-light].)
• Manual Power Off: Long press either earbud for 5 seconds [5 seconds]. (Visual description: Finger pressing an earbud for 5 seconds, with an indicator showing power off [light-off].)

Note: Manual power off only works when the earbuds are disconnected from a device.

How to Pair

Method 1: Automatic Pairing

1. Take both earbuds out of the charging case. They will automatically power on and pair with each other. (Visual description: Earbuds taken out, showing "power on" prompt and alternating white/red light [white-red-alternating-light].)
2. Turn on your device's Bluetooth, search for "X07", and select it to pair.
3. Upon successful connection, you will hear a "connected" prompt, and the earbud lights will turn off [light-off]. (Visual description: Phone screen showing "X07" connected, with earbud lights off.)

Method 2: Manual Pairing Mode

When disconnected, the earbuds automatically enter pairing mode. Follow steps 2 and 3 from Method 1.

Notice:

• If earbuds do not connect to your device within 5 minutes, they will auto power off.
• After the first pairing, earbuds remember the last connected device. They will auto-reconnect when taken out of the case.
• To pair with a new device, first "forget" or unpair "X07" from the previous device's Bluetooth settings.

Single Mode

You can use the earbuds in single mode:

• If both earbuds are in use, place one earbud back into the charging case.
• If both earbuds are in the charging case, take out only one earbud.

Music Control

• Pause/Play: Single click the MFB on either earbud [Left Earbud]/[Right Earbud]. [play-pause]
• Previous Track: Double click the MFB on the Left earbud [Left Earbud]. [previous-track]
• Next Track: Double click the MFB on the Right earbud [Right Earbud]. [next-track]
• Volume Adjustment (during playback or calls):
  • Volume Up: Long press the MFB on the Right earbud [Right Earbud]. [volume-up]
  • Volume Down: Long press the MFB on the Left earbud [Left Earbud]. [volume-down]

Multi-Function Operations

Phone Calls Control

• Answer/End Call: Single click the MFB on either earbud [Left Earbud]/[Right Earbud]. [answer-end-call] (Visual description: Single click on earbud for call control.)
• Reject Calls: Long press the MFB for 2 seconds [2 seconds] on either earbud [Left Earbud]/[Right Earbud]. [reject-call] (Visual description: Press and hold earbud for 2 seconds to reject call.)

Note: Each earbud has a built-in microphone and can be used individually or simultaneously.

Voice Assistance

• Activate/Turn off Voice Assistance: Quick triple click the MFB on either earbud [Left Earbud]/[Right Earbud]. [activate-voice-assistant] (Visual description: Triple click on earbud to activate/deactivate voice assistant.)

Earbuds Charging

• Insert the earbuds into the charging case properly. They will automatically power off and begin charging.
• The earbud battery level display on the case will flash up and down during charging. The light will turn off [light-off] once fully charged.

Low Battery Alarm: When an earbud's battery is below 10% (voltage below 3.4V), a voice prompt "Low Battery, Please charge" will sound once per minute, up to 5 times, before the earbud powers off.

Note: Ensure earbuds are clean and dry before placing them in the charging case.

Charging Case Charging

• Use the included Type-C USB charging cable to charge the case directly.
• During charging, the digital display on the case will flash, showing the real-time battery percentage. The indicator light outside the case will be red [red-light].
• Once fully charged, the display will show "100", and the indicator light will turn off [light-off].

Note: The right display panel indicates the charging status per earbud. There are 4 grids representing power consumption; these indicators will flash during charging.

Battery Warning

Improper battery use can lead to hazards like fire or explosion. Adhere to the following:

• Do not dispose of batteries in fire or hot ovens, or crush/cut them, as this can cause explosions.
• Avoid using batteries in extremely high temperatures, which can cause explosions or leakage of flammable materials.
• Do not expose batteries to extremely low air pressure, as this may also result in explosions or leakage.

Storage and Maintenance

1. If the earbuds have not been used for over 3 months, it is recommended to charge them.
2. Use chargers that comply with FCC (Federal Communications) standards.
3. Do not disassemble the earbuds.
4. Adult supervision is required for children aged 6 and under.
5. Avoid exposing earbuds to high or low temperatures, or using them during thunderstorms. Prevent falls or violent impacts. Keep the device away from fire.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Troubleshooting Guide

If you encounter issues, please refer to the following solutions. For unresolved problems, contact customer support via email.

Q: Why can't these earbuds pair with my phone?

A:

1. Ensure the earbuds are fully charged and powered on.
2. Verify that your phone's Bluetooth is turned on.
3. If the above points are correct, place the earbuds back into the charging case, close it for 1 minute, then remove them and attempt to reconnect with your phone.

Note: Earbuds automatically connect to the last paired device. To pair with a new device, forget "X07" from the previous device's Bluetooth list.

Q: Why does the music cut in or cut out?

A:

• Ensure the distance between the earbuds and your phone does not exceed 33 feet (without obstacles).
• If the distance is within 33 feet, try the following:
1. Place the earbuds into the charging case and "forget" "X07" from your phone's Bluetooth list.
2. After 1 minute, take the earbuds out of the charging case.
3. Search for "X07" on your phone's Bluetooth and reconnect.

Q: How can I do when the earbuds can't be charged?

A:

• Check if the earbuds are out of battery. If so, use the USB-C cable to charge them. Full charging takes approximately 2.5 hours.
• If battery is not the issue, check the earbuds and case charging contacts:
  • Ensure the charging pins [charging-pin] on the earbuds and the charging case are clean. Use a cotton swab [cotton-swab] lightly dampened with alcohol to wipe them.
  • Verify that the earbuds can be turned on normally.
  • Confirm that the charging case itself is charged and can be charged.

Q: Poor sound quality, how to deal with this issue?

A:

• Ensure you have selected the correct eartips and rotated the earbuds to a comfortable angle in your ears.
• The earbuds may be dirty. Use a cotton swab [cotton-swab] lightly dampened with alcohol to wipe the mesh [protective-grille] of the earbuds.