TAGRY K08 Open Ear Sport Headphones User Manual

01 Customer Service

For any issues with your earbuds, please visit www.tagry.shop for assistance.

02 Packing List

The package includes the following items:

• Charging Case x1
• Type-C Charging Cable x1
• Earbuds x2
• User Manual x1

Image shows the contents of the package: one charging case, one Type-C charging cable, two earbuds, and one user manual.

03 Product Overview

Earbud Components:

• Battery of Earbud
• Microphone
• Touch Control Area
• LED Indicator of Earbud
• Speaker
• Charging Contacts

Charging Case Components:

• Charging Case
• Power Display
• Charging Pins
• Type-C Charging Port

Diagram illustrates the components of an earbud, including the battery, microphone, touch control area, LED indicator, speaker, and charging contacts. The charging case components shown are the charging case itself, power display, charging pins, and Type-C charging port.

04 First Time Using

1. Prior to first use, please ensure to remove the protective film from the earbuds.
2. Insert the earbuds into the charging case and connect both the earbuds and the charging case to a power source using the provided Type-C charging cable. Allow them to charge for at least 10 minutes, especially if they haven't been used for an extended period. It is crucial not to remove the earbuds from the case while they are being charged.

Diagram shows a hand removing a protective film from an earbud, and another diagram shows earbuds placed in the charging case connected to a power source via a Type-C cable.

05 Correct Wearing

Please refer to the diagram below to ensure the correct positioning of the earbuds for optimal comfort. Adjust the earbuds to the most comfortable position once they are properly inserted.

Diagram illustrates the correct positioning of the earbuds in the ear for optimal comfort and fit.

06 Specifications

07 Maintenance

Care for Earbuds:

Please clean your earbuds regularly using a pointed cotton swab for optimal performance and hygiene.

• Clean the charging contacts regularly.
• Clean the protective grille regularly.

Regular cleaning of both the charging contacts and the protective grille will help maintain the quality and functionality of your earbuds.

Diagrams show a close-up of earbud charging contacts and a protective grille, with a cotton swab indicated for cleaning.

Care for Charging Case:

1. Please ensure to regularly charge your K08 charging case using the included Charging Cable and a charger (not included). Input: DC 5V.

Additionally, it is recommended to clean the charging pins of the case regularly using a pointed cotton swab.

Regular charging and cleaning of the charging pins will help maintain the functionality and performance of your K08 charging case.

08 Pairing and Connection

Stereo Mode:

Open the charging case and take both earbuds out. The earbuds will automatically enter the pairing mode. During pairing mode, the LED indicator light on the earbuds will flash red and blue alternately. If your earbuds are in the standby state, waiting to connect but fail to do so within 5 minutes, they will automatically power off. In such cases, you can manually power them on by tapping and holding each earbud for 2 seconds.

To connect your earbuds to your device, please proceed as follows:

1. Access the Bluetooth settings on your device.
2. From the list of available devices, select "K08" to initiate the connection.
3. Once successfully connected, you will hear a prompt saying "connected."

Diagrams depict the LED indicator flashing red and blue alternately during pairing mode. Another diagram shows a smartphone Bluetooth settings screen displaying 'K08' as a connected device.

Mono Mode:

To use only one earbud, simply take out one earbud from the charging case. To transition from using both earbuds to using only one earbud, place one of the earbuds back into the charging case.

A sequence illustrates taking out one earbud for mono mode.

09 Friendly Reminder

After the initial pairing, the K08 earbuds will remember the first device they were paired with. When you take out the earbuds from the charging case and your first device is nearby, they will automatically reconnect to it. To pair the earbuds with a new device, follow these methods:

If the initial device is out of range or more than 33 feet (10 meters) away, simply take out the earbuds and pair them with the new device.

If the initial device is within range, disconnect the earbuds from it first. Then, take out the earbuds and pair them with the new device.

Diagrams show a smartphone Bluetooth settings screen with options to 'Disconnect' from a paired device, and then a separate screen showing connection to a new device.

10 Smart Touch Control

Music Control:

• Play/Pause: Double tap R/L earbud
• Previous Music Track: Triple tap on "L" earbud
• Next Music Track: Triple tap on "R" earbud
• Volume Up: Long tap on "R" earbud
• Volume Down: Long tap on "L" earbud

Voice Assistance:

• Activate Voice Assistant: Triple tap on "R" or "L" earbud (pause music first)
• Exit Voice Assistant: Triple tap on "R" or "L" earbud

Phone Calls Control:

• Answer/End Call: Double tap on "R" or "L" earbud
• Reject Call: Long tap on "R" or "L" earbud for 2 seconds

Power On/Off:

• Power on: Method 1: Take earbuds out of charging case. Method 2: Long tap on earbud for 2 seconds.
• Power off: Method 1: Place earbuds back into charging case. Method 2: Long tap on earbud for 5 seconds (this method is for earbuds disconnected from a device).

Diagrams illustrate touch gestures on the earbuds: double tap for play/pause/answer/end call, triple tap for next/previous track/voice assistant, long tap for volume up/down/reject call.

11 How to Reset

1. Take both earbuds out of the charging case.
2. Ensure that both earbuds are disconnected from any devices.
3. Simultaneously tap both the right (R) and left (L) earbuds five times.

12 How to sync volume with Android Devices?

1. Find "Settings" on your phone.
2. Enable "Bluetooth".
3. Pair and connect with your "K08".
4. Click the "set" button on the right of "K08" on the Bluetooth list.
5. Enable "Sync volume with phone".

Screenshots of an Android phone's Bluetooth settings menu, highlighting the option to 'Sync volume with phone'.

13 Charging

Earbuds Charging:

Place earbuds into the charging case; they will then be charged. The indicator light of the earbud remains red while charging and disappears once fully charged.

Charging Case Charging:

Fully dry off the charging cable and the USB port before charging. Use a certified charger and the USB C cable provided to prevent any damage. Please use the provided USB C cable to connect the charging case to the power supply (Input: DC 5V).

Diagrams show an earbud inside the charging case with a red indicator light, and the charging case connected to a power source via a Type-C cable.

14 FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

15 FAQ

Q: What should I do if earbuds do not charge when I put them into the case?

A: 1. Ensure the charging case has sufficient power; charge it first if necessary. 2. If the case has power, inspect the charging contacts and pins inside the case for dirt or dust. Clean them with a pointed cotton swab dipped in alcohol.

Diagram shows a close-up of earbud charging contacts and charging pins, with a cotton swab indicated for cleaning.

Q: Why are earbuds disconnected from the device or is the sound cutting in/out?

A: Connectivity issues can be due to factors like the connected device or the environment. Bluetooth signals can be affected by obstacles such as walls, pillars, home appliances, and Wi-Fi signals. To ensure a stable connection, avoid such obstructions. Try these steps:

1. Fully charge your earbuds and reset them as described earlier. Then, re-pair them with your device.
2. Test the earbuds by playing a downloaded song or video to check if the audio is clear and consistent.
3. Verify the performance by connecting them to another Bluetooth device in a different environment.

Q: Why am I unable to adjust the volume by tapping and holding either earbud?

A: This is by design when music is paused. To adjust volume at this status:

Method 1: Adjust volume via the phone's volume buttons.

Method 2: Play music again, then you can adjust volume via long tap on the right or left earbud.

If neither method proves effective, please contact support@tagry.shop for replacement.

Q: Earbuds cannot pair with my new device, why?

A: Ensure the K08 headphones are disconnected from your previous paired device before pairing with a new one, and that they have sufficient battery. Ensure your new device has Bluetooth functionality. If these conditions are met but pairing fails, reset your K08 headphones:

1. Take both K08 earbuds out of the charging case.
2. Ensure they are not connected to any device, then tap both earbuds five times simultaneously.
3. Place both earbuds back into the charging case, then take them out again. They are now reset. Proceed with pairing to connect them to your device.

If you still cannot connect after resetting, please contact TAGRY for assistance.

Q: Sound of earbuds is too low, how to fix it?

A: Ensure both your headphone volume and your phone volume are set to the maximum level and are synchronized. If the sound remains low, it indicates the grille might be dirty. Please clean the grille with a pointed cotton swab.

Diagram shows a close-up of the earbud's protective grille, with a cotton swab indicated for cleaning.

If the sound remains low despite following these steps, please contact TAGRY for assistance.

Please scan the QR code to activate lifetime warranty of your earbuds within 15 days. Visit www.tagry.shop.