XTM CFR2050XTM Dual-Zone Portable Fridge/Freezer 75L

Introduction

Thank you for purchasing this portable fridge/freezer. Every care has been taken to ensure it reaches you in perfect condition. If you experience a problem or require assistance, please contact customer service. Do not return the fridge/freezer to the place of purchase. Keep a photocopy of your purchase receipt.

Customer Service (Australia): 1300 174 876

Operating times: Monday - Friday, 8:00 am - 5:00 pm (Australian Eastern Standard Time, AEST)

General Information & Safety Instructions

Read this manual thoroughly before first use. Follow basic safety precautions and accident prevention measures when using an electrical appliance.

Electrical Safety and Cord Handling

• Ensure your local outlet voltage and circuit frequency correspond to the appliance rating label.
• Use a properly earthed AC mains or 12V DC socket. Do not alter the 240V AC plug.
• Do not immerse the cord, plug, or appliance in water or other liquid.
• Ensure hands are dry before handling the plug or switching on. Do not use on wet surfaces.
• Installation of AC power in boats should be carried out by a qualified electrician.
• Protect the power cord: Do not kink, damage, wrap around the appliance, pull by the cord, or use as a handle. Keep away from heated surfaces.
• Never touch uninsulated cords with bare hands.
• For boat installations, ensure the AC mains system is protected by a fuse and an earth leakage protection device.
• Always ensure the correct voltage is applied.
• Never obstruct vents to the compressor.
• Defrost regularly. Never use sharp implements to remove ice.
• Never use abrasive or solvent-based materials for cleaning.
• Do not use electrical appliances inside the cooling compartment.

Note: This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised. Children should be supervised to ensure they do not play with the appliance.

Caution: Do not store explosive substances such as aerosol cans with flammable propellant in this appliance.

Note: This appliance is suitable for camping use and may be connected to more than one power source.

Appliance and Accessories

The appliance includes:

• Storage Baskets
• Internal LED Lights
• Aluminium Lining
• Metal Exterior
• Cabinet Lids
• Carry Handle
• Power Input Panel
• Control Panel
• 240V AC Power Cord
• 12V/24V DC Power Cord

Installation

After unpacking, check that no parts are missing. Place the unit in a dry place protected against splashing water. Do not place adjacent to heat sources, gas ovens, hot water pipes, or in direct sunlight.

Ensure the appliance is installed and operated according to these instructions for optimal performance, efficiency, and operation.

Application and Operative Cooling Range

The cooling compartment has varying temperature zones. The digital display indicates the temperature in the middle of the cabinet. The Dual Zone fridge/freezer can be used as a fridge, freezer, or both simultaneously. It is designed for outdoor use such as camping.

The fridge/freezer is designed to operate in ambient temperatures between -10°C and +55°C with a maximum air humidity of 90%. It can operate continuously at a maximum angle of 30°. Level operation is preferable.

Note: Adequate airflow is required around the compressor at all times for heat radiation (Fig. 1). The cooling system is designed to operate on angles up to 30 degrees. Exposure to angles over 30 degrees should be limited to a maximum of four (4) hours continuous operation (Fig. 2).

Power Requirements

The fridge/freezer operates on AC or DC voltage:

• AC Input: 240V AC at 50Hz.
• DC Input: 12V or 24V DC (e.g., car cigarette lighter or car battery).

The power supply automatically switches to mains operation when connected to 240V mains power, even if the 12V/24V DC power cord is connected.

If the fridge/freezer is operating when the vehicle ignition is switched OFF, it will switch OFF automatically when the power source voltage falls below the Battery Protection cut-out setting. It will switch back ON when the vehicle is restarted and the power source voltage reaches the Battery Protection cut-in setting.

Operating Your Fridge/Freezer with 12/24V DC

• Plug the 12V/24V DC power cord into the DC power socket on the fridge/freezer and connect to a suitable 12V or 24V DC power source.
• The fridge/freezer will automatically turn on.
• The display will show the current internal cabinet temperature.
• For optimum performance, a reliable DC power source is important. Direct connection to the battery is recommended.
• Use only the supplied 1.5m DC power cord.

Important: If a DC extension cord is required, use a 6mm dia. (AWG11) 4.58mm² Twin Sheath Two Core cord with direct connection to the battery terminals and a 15A inline fuse.

The fridge/freezer has electronic control to prevent polarity reversal. The power input socket has a 15A blade fuse.

12/24V DC Power Requirements

If your fridge/freezer is cutting out prematurely, check:

1. Low voltage protection setting on Battery Protection.
2. Suitability of the DC power cord and connections.

The fridge/freezer has a multi-level Battery Protection to prevent excessive discharging of your vehicle battery. Setting Battery Protection to LOW is recommended when using DC power supply.

Note: A battery charger may only be connected to the battery when the fridge/freezer is disconnected from the DC power source.

Over-voltage may damage the electronics. The fridge/freezer has reverse polarity protection.

Note: Use the correct cord size and gauge for DC supply to prevent voltage decrease over distance.

Always consult a qualified automotive electrician when using a DC extension cord.

Operating Your Fridge/Freezer with 240V AC

• Plug the 240V AC power cord into the AC POWER socket on the fridge/freezer and connect to a suitable 240V AC power source.
• The fridge/freezer will automatically turn on.
• The display will show the current internal cabinet temperature.
• The unit has a multi-voltage internal power supply with priority circuit for 240V AC.
• The power input socket has a 15A DC blade and a 5A/250V glass fuse.

Caution: Do not touch cords, plugs, or switches with wet hands or wet feet. If operating on a boat via a shore connection, the power connection must include an earth leakage RCD residual current device.

Temperature Control

Upon connection to AC or DC power, the appliance automatically switches on. The LCD control panel displays the current cabinet temperature, Battery Protection, and Cooling Speed settings, along with the current input voltage.

The Temperature Controller maintains the set temperature. The compressor starts when the internal cabinet temperature increases by 0.5 to 1.5 degrees above the set temperature and runs until it is 0.5 to 1.5 degrees below the set temperature.

Battery Protection Setting

1. Fridge automatically restarts once input voltage is reached and retains original settings.

2. Audible beeping occurs when the monitor is activated.

Smart Phone App

Download the 'Unique Portables' app from the App Store or Google Play.

1. Download the App: Search for 'Unique Portables'.
2. Search for a connection: Ensure the fridge/freezer is connected to a suitable power source and Bluetooth is enabled on your phone. Launch the app and search for your fridge/freezer.
3. Confirm Connection: An LED on the fridge/freezer control panel will illuminate to confirm the connection.
4. Settings and Operation: Once connected, your device will display current settings and operation.

Note: The app connects and controls one fridge at a time within 10m. Keep obstructions to a minimum for best operation. The app is free of charge (download charges may apply).

Temperature Control Unit

Power: Press and hold the power button for 3 seconds to turn the fridge ON or OFF.

Temperature Setting - Right Zone: Press SET for 5 seconds to select the right zone. The display will flash the current temperature. Use the up/down buttons to set the temperature. The display will flash 5 times and return to actual temperature.

Temperature Setting - Left Zone: Press SET for 5 seconds until the right zone flashes. Press SET again for the left zone. The display will flash the current temperature. Use the up/down buttons to set the temperature. The display will flash 5 times and return to actual temperature.

Battery Protection: Press and hold the battery protection button for 5 seconds until an audible beep. Continue to press to select the required setting (HIGH, MED, LOW).

Compressor Speed: Press and hold the compressor speed button for 5 seconds until an audible beep. Continue to press to select the required setting (MAX, NORM, ECO).

Using with Solar Panel or Generator

Using with Solar Panels

The fridge/freezer's power consumption and efficiency make it ideal for use with solar panels to recharge the DC power source. Solar panels provide charge to the battery during daylight hours while the appliance operates.

As solar panel output varies, the fridge/freezer cannot be connected directly to solar panels. It must be connected to a suitable DC battery, with the solar panels connected to the battery.

Recommended solar panel kits are 100 to 200 watts. DO NOT connect the fridge/freezer directly to the solar panel; connection must be via the battery.

Using Portable Generators

Use the correct generator size. An incorrect generator or voltage output may result in reduced performance or damage, voiding the warranty.

If connecting directly to an AC generator, use only a digital or inverter type generator that provides a stable 240V AC output, designed for electronic appliances.

DO NOT connect the fridge/freezer directly to a generator's DC power output; this will cause damage and void the warranty. Connection must be via the battery.

When charging the battery using a generator, use a 'smart battery charger' that is fully automatic, spark-proof, and reverse polarity protected. Connect the battery charger directly to the generator's AC power output.

Diagram showing connection of Solar Panel -> Generator -> Charger -> Battery -> Fridge/Freezer

Owners Manual Tips and Suggestions

• Do not store fresh and frozen foods right beside each other.
• When setting temperatures at 0°C or lower, do not store glass bottles or liquids that may freeze and shatter.
• Store items like fruit and vegetables closer to the top of the cabinet, which is slightly warmer, to reduce the risk of spoiling and damage.
• For efficiency, keep the cabinet as full as possible. A full cabinet uses less power than a half-empty one. Replace finished products with bottles of water to fill empty spaces.
• Minimize frequent door opening to prevent warm air entry.
• When located in a car or trailer, keep the appliance away from direct sunlight and ensure adequate ventilation for efficient power consumption and performance. Vehicle interiors can reach +55°C in the sun.

Maintenance and Service

Clean the fridge/freezer prior to initial use. Use a cloth slightly moistened with lukewarm water. Avoid getting water into the seals. Dry the fridge/freezer with a cloth after cleaning. Clean periodically.

Attention:

• DO NOT use solvents or agents with sand or acid parts for cleaning.
• DO NOT use brushes, graters, or hard sharp tools.
• Before cleaning, disconnect the power cord and switch OFF the fridge/freezer.
• Clean inside and out with a damp cloth. For stubborn dirt, use sodium bicarbonate dissolved in lukewarm water. Rinse with clean water and dry carefully.
• When storing for a long period, do NOT fully close the lid to prevent mould and odours.

For additional queries, service, and maintenance, contact After Sales Support at 1300 174 876.

Disposal

Dispose of the fridge/freezer responsibly to avoid environmental contamination. Contact your local council for recycling information.

Trouble Shooting

Technical Specifications

For further information or assistance, please contact customer service on 1300 174 876.