XTM 150PSI 250LPM Dual Air Compressor Owners Manual
This manual provides essential information for the safe and effective operation of your XTM Dual Air Compressor.
Product Overview
The XTM 150PSI 250LPM Dual Air Compressor is designed for 4WD and vehicle use, offering powerful and efficient tyre inflation. It features automatic thermal cut-off, circuit breaker protection, and a timer cut-off function for safety and longevity.
Image Description: The compressor unit is black and orange, featuring two cylinders, mounted on a metal base plate with rubber anti-vibration feet. It includes a 10-meter rubber air hose with an in-line pressure gauge, a pressure release button, and a quick-connect fitting. Accessories include a screw-on brass inflator, a thumb lock adaptor, and three nozzle adaptors for various inflation needs. The unit is stored in a handy carry bag.
Protection Features
Thermal Cut-Off and Circuit Breaker Protection
The XTM Dual Air Compressor is equipped with an automatic thermal cut-off protection. If the unit reaches an unsafe operating temperature, a protection circuit will activate, cutting off all power to prevent damage. Disconnect the unit from the power source and allow it to cool for approximately 15 minutes. The circuit will automatically reset when the temperature returns to a safe level. Always allow the compressor to cool before reuse. An auto-reset circuit breaker is built-in to protect against overload or short circuits.
Timer Cut-Off Protection
This compressor also features an automatic timer cut-off. After 15 minutes of continuous operation, the air compressor will automatically shut off to prevent damage.
Maintenance
- All moving parts are permanently lubricated; no additional lubrication is required.
- Before and after each use, inspect the compressor unit and hoses for signs of damage.
- Check the air filter regularly (at least every six months). Remove the cover and clean the air filter gently with mild soapy water, rinse well, and replace if worn.
Note: Tyre gauge pressure readings during operation will not be accurate. Turn off the air compressor to obtain an accurate reading.
Specifications
| Feature | Specification |
|---|---|
| Voltage | 12 Volt DC |
| Maximum Pressure | 150 PSI |
| Maximum Air Flow | 250 Litres Per Minute |
| Inline Fuse | 100A |
| Maximum Voltage | 13.8 Volt |
| Maximum Amp Draw | 90 Amp |
| Operating Temperature | -15°C To 35°C |
| Electrical Current Protection | Circuit Breaker |
| Thermal Cut-off Protection | Automatic Thermal Cut-off at 105°C |
| Automatic Timer Cut-off | After 15 Minutes Continuous Operation |
| Cylinder Diameter | 2 X 60mm |
| Power Cord | 2 Metres Heavy Duty Cable With Durable Battery Clamps |
| Rubber Air Hose | 10 Metres with In-line Pressure Gauge, Pressure Release Button and Quick Connect Fitting |
| Valve Connectors | 1 X Screw-on Brass Inflator and 1 X Thumb Lock Adaptor |
| Pressure Gauge | 0-150 PSI / 0-1,034 kPa Multi Readings with Plastic Protective Cover |
| Solid Base Plate | Metal Sand Tray With Rubber Anti-Vibration Feet |
| Air Filter | Built-In Cleanable Sponge Filter |
| Accessories | 3 X Nozzle Adaptors for Camping and Sporting Equipment |
| Storage | Handy Carry Bag |
Warranty
This product is guaranteed to be free from quality and manufacturing defects for a period of 12 months from the date of purchase.
If your product becomes defective during this period, SRGS PTY LTD will offer a replacement, credit, or refund if the product is faulty, wrongly described, different from sample, or does not perform as expected.
This warranty does not cover:
- Substantially modified products.
- Misuse or abuse contrary to user instructions or packaging label.
- Change of mind.
- Normal wear and tear.
Australian Consumer Law guarantees apply. You are entitled to a replacement or refund for a major failure and compensation for other reasonably foreseeable loss or damage. Goods can be repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.
To claim warranty, take the product to the service desk of your nearest store of purchase with proof of purchase (receipt or bank statement). Identification may be required.
Return shipping costs are generally your responsibility, except for products assessed as having a major failure, where SRGS PTY LTD will cover return freight for online purchases.
This warranty is provided by SRGS PTY LTD, 6 Coulthards Avenue, Strathpine QLD 4500, Australia. Phone: 1300 880 764.
Warnings
- Read the entire owners manual thoroughly before use.
- This air compressor operates on a 12 Volt electrical system only.
- Use extreme caution when connecting to a power source, as vehicle batteries can spark and vent explosive gases. Safety glasses are recommended.
- All parts, including the handle, hose, fittings, and compressor, generate high heat during and after operation. Allow the unit to cool before handling to avoid burns. Always use gloves.
- Only inflate tyres to the manufacturer's recommended pressure. DO NOT over-inflate tyres, as this could result in serious injury or death.
- After 5 minutes of continuous operation, allow the unit to cool before restarting. Overuse can cause damage.
- Do not use this compressor with wet hands or allow it to get wet while in use.
Operating Instructions
- Before operating, ensure you are in a safe location away from traffic. Inspect the compressor and accessories for any signs of damage. If damaged, DO NOT use and replace parts.
- Remove the compressor from the carry bag and place it on a dry, level surface near the 12 Volt power source.
- Connect the 10-meter rubber air hose to the compressor using the quick connect fitting.
- Choose your connector: the screw type is pre-attached. For the thumb lock adaptor, screw its end into the screw type connector on the air hose and ensure a good seal.
- Connect the RED battery clamp to the POSITIVE (+) post of your 12 Volt vehicle battery or power source.
- Connect the BLACK battery clamp to the NEGATIVE (-) post.
- Test connections and airflow by switching the compressor ON using the [ON/OFF switch]. Direct the hose away from yourself and others during testing.
- To inflate a tyre:
- Remove the valve cap from the tyre valve. Ensure the valve system is clean.
- Screw type connector: Screw the brass inflator onto the tyre valve until finger-tight. DO NOT use tools, as this may damage the inflator or valve system.
- Thumb lock adaptor: Press the lever down, firmly press the adaptor onto the tyre valve system to create a good seal, then release the lever.
- Remove the brass inflator or thumb lock adaptor from the tyre valve system. Refit the valve cap.
- Disconnect the battery clamps from the power source.
- Allow the air compressor to cool completely before storing it in the carry bag in a dry location.
Use extra caution when inflating small objects like bicycle tyres and sport balls. Pay close attention to the pressure gauge and be ready to stop the compressor when the manufacturer's recommended pressure is reached.
