BIGBIG WON Blitz Game Controller
01. Component Diagram
The controller features the following components:
- HOME button
- Left joystick (LS)
- D-pad
- Left LED strip
- Channel indicator LED
- Combos button
- Mapping button
- NFC
- M4, M2, M1 buttons (back/extendable keys)
- ZR button
- FN button (for pairing/functions)
- Screenshot button
- R button
- A/B/X/Y buttons
- RS Right joystick
- Right LED strip
- Configuration button
- Macro button
- M3 button (back/extendable key)
- ZL button
Package List:
- Xunlong Wireless Game Controller *1
- Data Cable *1
- Instruction Manual *1
- Certificate of Conformity *1
Compatible Platforms: Switch / Win10/11 / Android/iOS
02. Power On/Off
Press and hold the HOME button for 3 seconds to turn the controller on or off.
03. Connection
The controller supports two connection methods: Bluetooth and wired connection.
Bluetooth Connection:
After turning on the controller, press and hold the pairing button on the top for 3 seconds. The HOME light will flash rapidly, indicating it has entered pairing mode. Once successfully connected, the HOME light will remain solid. (In Switch mode, the channel indicator light's illumination depends on the order the controller is connected to the host.)
Wired Connection:
After turning on the controller, use the Type-C data cable to connect the controller to the host.
Note: The controller is compatible with Switch and Xinput modes. After connecting to a host, you must switch to the corresponding mode for correct usage. The default mode is Switch.
Steam Platform: You must enable "Support XBOX configuration" in Steam's "Settings - Controller - General Controller Settings". Otherwise, the controller may not be recognized in games.
Switch Platform: After connecting to the Switch via cable, you must enable "Settings - Controller & Sensors - Pro Controller Wired Communication".
04. Mode Switching
This controller supports Switch and Xinput modes. After connecting, you must switch to the corresponding mode for correct use. The configuration methods are as follows:
Switch Mode: Press and hold the A + HOME buttons for 3 seconds until the HOME light turns red. This indicates Switch mode.
Xinput Mode: Press and hold the B + HOME buttons for 3 seconds until the HOME light turns green. This indicates Xinput mode.
Note: To connect the controller to iOS and Android platforms via Bluetooth, you need to switch to Xinput mode.
05. Mapping
The controller includes four extendable back buttons and supports key mapping configuration. The process is as follows:
Setting Combos:
Press and hold FN + (M1/M2/M3/M4). The FN indicator light will flash from bright to dim, indicating entry into mapping mode. Press the front key you wish to map to M1/M2/M3/M4 again. The indicator light will flash, signifying successful mapping.
Clearing Individual Mappings:
Press and hold the "Key to cancel mapping (M1/M2/M3/M4)", then double-click the FN button. The FN indicator light will flash twice, indicating the mapping configuration for the current key has been cleared.
Clearing All Mappings:
Double-click the FN button directly. The FN indicator light will flash twice, indicating all key mapping configurations have been cleared.
06. Combos
The controller supports combo key configuration. A total of 16 keys are compatible, including A/B/X/Y, ↑/↓/←/→, L/R/ZL/ZR, M1/M2/M3/M4. The configuration is as follows:
Setting Combos:
Press and hold FN + [a key]. The FN indicator light will flash twice, indicating successful activation. (During combo operation, the FN indicator light will flash at the current combo frequency.)
Clearing Individual Combos:
Press and hold the "Key to cancel macro" button (M1/M2/M3/M4), then double-click the FN button. The FN indicator light will flash twice, indicating the combo configuration for the current key has been cleared.
Clearing All Combos:
Double-click the FN button directly. The FN indicator light will flash twice, indicating all combo configurations have been cleared.
Combo Frequency:
Press and hold FN + [Up arrow] to cycle through three frequencies: 5/s, 10/s, and 20/s. The default frequency is 5/s.
07. Macro Recording
The controller supports macro recording. Each macro must be linked to a back button (M1/M2/M3/M4) as a trigger switch. The keys that support recording are A/B/X/Y, ↑/↓/←/→, L/R/ZL/ZR, LS/RS, and the eight joystick directions. The configuration for this function is as follows:
Macro Recording:
Press and hold FN + (M1/M2/M3/M4) for 3 seconds. The FN indicator light will change from bright to dim, indicating entry into macro recording mode. Press the console keys to record the macro, and click the FN button once recording is complete. The FN indicator light will flash twice, signifying the recording has finished. (During macro execution, the FN indicator light will flash slowly until macro execution is complete.)
Clearing Individual Macros:
Press and hold the "Key to cancel macro (M1/M2/M3/M4)", then double-click the FN button. The FN indicator light will flash twice, indicating the macro configuration for the current key has been cleared.
Clearing All Macros:
Double-click the FN button directly. The FN indicator light will flash twice, indicating all macro configurations have been cleared.
08. Integrated Setting Switching
Switch Mode:
First, click the [Configuration button] to change the channel indicator light from red to white, indicating entry into setting switching mode. In this mode, the four indicator lights represent four different integrated settings.
Click the [Configuration button] again to start changing settings. The indicator lights will change sequentially from top to bottom. The number of illuminated indicator lights represents the controller's corresponding integrated setting.
If settings are changed within 5 seconds, the mode will automatically exit setting switching mode. The indicator light will change from white back to red, indicating the channel.
Xinput Mode:
In this mode, there is no channel indication function, so the indicator light defaults to white to show the current integrated setting. In this mode, click the [Configuration button] to directly change the settings.
09. Joystick Dead Zone Switching
The controller is designed for competitive play, with a default factory setting of 0 joystick dead zone for enhanced control precision. However, this may cause slight deviations in games without dead zones. To accommodate more users, two dead zone modes (0/10) are available.
Operation: Press and hold FN + Left Joystick Down (LS) and Right Joystick Down (RS) to switch between dead zone modes 0/10 for the left and right joysticks, respectively.
10. Joystick Calibration
If the joystick deviates significantly or the maximum downward value cannot be adjusted, you can try calibrating the joystick. The operation method is as follows:
- Press and hold the + and [Screenshot button] keys simultaneously for 3 seconds. The left and right LED lights will flash orange simultaneously, indicating entry into calibration mode.
- Push the joystick to its limit and rotate it at a constant speed. Repeat this operation 3 to 5 times.
- Finally, press the + and [Screenshot button] keys simultaneously. The left and right LED lights will flash twice and then turn off, indicating calibration is complete.
11. Gyroscope Calibration
If the controller's gyroscope deviates, you can attempt to calibrate it. The operation method is as follows:
- Place the controller on a horizontal surface. Press the + and Screenshot keys simultaneously. The left and right LED lights will turn on simultaneously in purple, flashing from bright to dim, indicating entry into calibration mode.
- Wait a moment until the purple lights flash twice, indicating calibration is complete.
12. Vibration Adjustment
The controller supports four-speed vibration adjustment, detailed as follows:
Press FN + [Right arrow] to cycle through the four vibration modes: strong, medium, weak, and off.
13. Battery Description
If the battery charge is too low, the LED strip on both sides of the handle will flash red 10 times at a frequency of 2 times per second, reminding you every 5 minutes.
After connecting to a power source, the LED strip will illuminate red, fading from bright to dim, indicating charging. Once charging is complete, the charging light effect turns off, and the LED strip returns to its original state.
Charging Dock:
The charging dock does not display a standby light indication. When the controller is connected to the dock, if the dock's RGB indicator LED is colorful, it indicates the handle is charging. If the RGB LED is solid green, it indicates the battery is fully charged.
14. Function Operation Instructions
Visit the official website for video guides: BIGBIG WON Official Website Support Page
15. Your Rights
You are entitled to a 12-month warranty from the date of purchase.
Support and Services
BIGBIG WON provides support and services for its products, including video tutorials, update tools, and electronic instruction manuals.
