Brand: Nedis
WIFICDP10xx Wi-Fi Video Doorphone
Product Overview
The Nedis WIFICDP10xx is a Wi-Fi enabled video doorphone designed for enhanced home security and convenience. This document serves as a quick start guide and provides essential information for setup, usage, and maintenance.
Specifications
| Resolution | 1280x720 |
| Viewing angle | 130° |
| Image sensor | 1/3” CMOS sensor |
| Night vision | 15.0 m |
| Memory | microSD (not included) |
| Dimensions | 114 x 44 x 27 mm |
| IP-rating | IP53 (splash proof) |
| Working temperature | -20 - 50°C |
| Input power | 8 - 24 VAC |
| Connection | Wi-Fi 802.11 b/g/n/ |
| Frequency range | 2400 - 2484 MHz |
| Max. transmit power | 18 dBm |
Product Components
The device includes the following components:
- 1. Doorbell button: The primary button for visitors to press.
- 2. Status indicator: Shows the operational status of the device.
- 3. Camera: Captures video footage.
- 4. Microphone: Captures audio.
- 5. Speaker: Outputs audio for two-way communication.
- 6. Reset button: Used to reset the device to factory settings.
- 7. Memory card slot (microSD): For storing video recordings (card not included).
- 8. External power port: For connecting the power supply.
Diagram Description: The front of the device features the camera lens at the top, followed by the microphone, speaker, status indicator, and the doorbell button at the bottom. The rear view shows mounting points, a microSD card slot, and a reset button. The top edge typically houses speaker grilles and microphone holes.
Safety Precautions
⚠️ CAUTION: RISK OF ELECTRIC SHOCK - DO NOT OPEN
- To reduce the risk of electric shock, this product should only be opened by an authorized technician when service is required.
- Disconnect the product from the mains and other equipment if a problem should occur.
- Read the manual carefully before use. Keep the manual for future reference.
- Only use the device for its intended purposes. Do not use the device for other purposes than described in the manual.
- Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.
Setup and Usage
- Download and install the "Nedis SmartLife" app from the Apple App Store or Google Play Store on your mobile device.
- Launch the "Nedis SmartLife" app.
- Create a new account or log in to your existing account.
- Tap "+" to add the device.
- Select "Security Camera" from the list of products.
- Optional: Insert a memory card into the memory card slot.
- Connect the external power (8-24 VAC) through the bracket (and the angle adjuster) to the rear of the unit. The transformer of your existing wired doorbell can often be used to power the device.
- If the status indicator does not flash: Press the reset button. If the status indicator flashes: Confirm in the app.
- Confirm the Wi-Fi network and password.
- Enter the device name. (Note: The device name will also be used for push notifications.)
- Mount the bracket (and the angle adjuster) on the required location using the screws.
- Place the camera into the bracket (top first) and lock the camera with the bolt in the bottom of the bracket.
Cleaning and Maintenance
❗ Warning!
- Do not use cleaning solvents or abrasives.
- Do not clean the inside of the device.
- Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
- Clean the outside of the device using a soft, damp cloth.
Support
If you need further help or have comments or suggestions, please visit www.nedis.com/support.
Contact
NEDIS B.V., De Tweeling 28, 5215 MC 's-Hertogenbosch, The Netherlands
