Quick Start Guide - Nedis Wireless Doorbell
Model: DOORBK240CWT
Getting Started
Follow these simple steps to set up your Nedis wireless doorbell.
-
Step 1: Insert the Receiver into the Outlet
Plug the receiver unit into a standard electrical wall outlet. The diagram shows a hand inserting the rectangular receiver into a wall socket.
-
Step 2: Pairing
Pair the transmitter with the receiver. The receiver will emit a 'BLEEP' sound when ready for pairing. The diagram shows the receiver emitting this sound.
-
Step 3: Choose a Tune
Select your preferred doorbell sound from the 36 available tunes. The diagram indicates '36 tunes' are selectable via a button on the receiver.
-
Step 4: Set the Volume
Adjust the volume level for the doorbell chime. The diagram shows a volume control with multiple settings (indicated by '6x').
-
Step 5: Attach the Transmitter
Mount the transmitter unit (labeled A or B) to your desired location, typically near the door. The diagram illustrates attaching the transmitter to a surface.
Product Information
Intended Use
This product is designed as a wireless doorbell system. It comprises a self-powered transmitter and a receiver that plugs directly into a wall outlet. The receiver is intended for indoor use only. Any modification of the product may have consequences for safety, warranty, and proper functioning.
Safety and Usage
? Please read the accompanied safety instructions before using the product.
For more detailed information, consult the extended manual online at: ned.is/doorbk240cwt
