Product Overview
The soundcore P40i are wireless earbuds designed for convenient audio playback and calls. This guide provides essential instructions for quick setup and usage.
Recycling Information: This device, its batteries, and cords are recyclable. Please dispose of them at designated collection points, such as stores or recycling centers. For more information, visit www.quefairedemesdechets.fr (France).
The product packaging (PAP 22 Raccolta Carta) is made of recyclable paper.
Support & Resources
For frequently asked questions (FAQs) and additional support information, please visit the official soundcore website. A QR code is provided in the original document to easily access FAQs and the full user guide.
Scan the QR code to visit soundcore support for FAQs.
Scan the QR code to view the full User Guide.
Wearing Your Earbuds
To ensure optimal sound quality and comfort, choose the correct ear tip size and wear the earbuds properly.
- Select the ear tips that best fit your ears. Sizes available include XS, S, M, L, XL.
- Insert the earbud into your ear canal and gently twist to secure it in place.
Diagram description: The document shows four ear tip sizes (XS, S, M, L, XL) and four illustrations demonstrating how the earbud fits into the ear, with different ear tip sizes shown for optimal fit.
Powering On & Pairing
- Power On: Open the charging case. The earbuds will automatically power on.
- Pairing: On your device, enable Bluetooth and select "soundcore P40i" from the list of available devices. The earbuds will enter pairing mode (indicated by a blinking light) and connect (indicated by a solid light).
Diagram description: Illustration 1 shows the earbuds inside the open charging case. Illustration 2 shows a phone screen with Bluetooth enabled, displaying "soundcore P40i" as an available device. Text indicates "PAIRING" with a blinking light symbol and "CONNECTED" with a solid light symbol.
Charging
- Charge Earbuds: Place the earbuds back into the charging case and close the lid. The case will charge the earbuds.
- Charge Case: Connect the charging case to a power source using a USB-C cable.
LED Indicators:
- Short light (blinking): Indicates battery level < 20%.
- Short light (solid): Indicates battery level 20% - 60%.
- Long light (solid): Indicates battery level 60% - 99%.
- Long light (solid for 5 minutes): Indicates 100% charged.
Quick Charge: 10 minutes of charging provides approximately 5 hours of playtime.
Diagram description: Illustration 1 shows earbuds being placed into the charging case. Illustration 2 shows the charging case connected via USB-C cable, with LED indicators showing battery levels and charging status. An icon depicts wireless charging capability.
Resetting Your Earbuds
If you experience connectivity issues or other problems, you may need to reset the earbuds.
- Place the earbuds into the charging case and leave the lid open.
- Press and hold the button on the charging case for 10 seconds until the LED indicators flash red three times. This indicates a successful reset.
Diagram description: Illustration 1 shows earbuds in the open case. Illustration 2 shows pressing the button on the case for 10 seconds, with an indicator flashing red three times.
Touch Controls
The soundcore P40i earbuds feature touch controls for various functions in both True Wireless Stereo (TWS) and Mono modes.
TWS Mode
Music Playback:
- Left Earbud (L) x2 taps: Previous track
- Right Earbud (R) x2 taps: Next track
Calls:
- L/R x2 taps: Answer/End call
- L/R hold 2s: Reject call
Noise Control:
- L/R hold 2s: Switch between Active Noise Cancellation (ANC) and Transparency modes.
Mono Mode
Music Playback:
- x2 taps: Next track
Calls:
- x2 taps: Answer/End call
- Hold 2s: Reject call
Noise Control:
- Hold 2s: Switch between Normal and Transparency modes.
Diagram description: Visual representations of touch gestures for TWS and Mono modes, showing icons for music playback (play/pause, next/previous track), calls (answer/end, reject), and noise control (ANC/Transparency/Normal).
Powering Off
- Place the earbuds back into the charging case.
- Close the charging case lid. The earbuds will automatically power off.
Diagram description: Illustration 1 shows earbuds being placed into the charging case. Illustration 2 shows the charging case lid being closed.
Warranty & Contact Information
soundcore P40i earbuds come with an 18-month limited warranty. For warranty service and support, please contact Anker Innovations Limited.
Contact Information:
- Email: service@soundcore.com, support.mea@soundcore.com (Middle East and Africa Only), support@anker.com (Japan)
- Phone (US/Canada): +1 (800) 988 7973
- Phone (UK): +44 (0) 1604 936200
- Phone (Germany): +49(0)69 9579 7960
- Phone (Japan): 03 4455 7823
- Phone (China): +86 400 0550036
- Phone (Korea): +82 02-1661-9246
- Phone (Middle East & Africa): +971 529750842, +971 8000320817 (UAE)
- Phone (KSA): +966 8008500030
- Phone (Kuwait): +965 22069086
- Phone (Egypt): +20 8000000826
- Phone (Australia): +61 3 8331 4800
- Phone (Turkey): +90 (850) 460 14 14
- Phone (Russia): +8 (800) 511-86-23
- Phone (India): +91 18003138831
Specifications:
- Input: 5V = 0.8A
- Output: 5V = 0.34A (0.17A per port)
- Playtime (ANC on): Up to 50 hours
- Playtime (ANC off): Up to 60 hours
Manufacturer: Anker Innovations Limited, Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
EU and UK Importer: Anker Technology (UK) Limited, GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom
Germany Importer: Anker Innovations Deutschland GmbH, Georg-Muche-Strasse 3, 80807 Munich, Germany
FCC ID: 2AOKB-A3955
IC: 23451-A3955
Important Safety & Compliance Information
Important Safety Instructions
- Do not disassemble the product.
- Keep out of reach of children. The product contains small parts that may pose a choking hazard.
- Do not expose the battery to excessive heat (sunshine, fire, etc.).
- Do not use the product in environments with extremely high or low temperatures, and never expose it to strong sunlight or very wet conditions.
- Ensure no liquid, sweat, or water is on the charging port when charging.
- Refer to your user manual for the earphones' waterproof level and follow the corresponding instructions.
- For IPX4: Do not expose earphones to dripping or splashing water.
- For IPX4, IPX5, and IPX6: Do not submerge earphones in water.
Hearing Safety
To avoid hearing damage:
- Do not listen at high volume for extended periods.
- Do not turn the volume so high that you cannot hear your surroundings.
- Do not use earphones while driving.
- Use caution or temporarily discontinue use in potentially hazardous situations.
Magnetic Field Warning: The product generates strong permanent magnetic fields that could interfere with cardiac pacemakers, implanted defibrillators (ICDs), and other implants. Always maintain a distance of at least 3.94 inches (10 cm) between the product component containing the magnet (earbuds and charging case) and the cardiac pacemaker, implanted defibrillator, or other implant.
Compliance & Disposal
This product complies with the radio interference requirements of the European Community.
This symbol indicates that the product must not be discarded as household waste and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal helps prevent negative consequences for the environment and human health.
This symbol indicates "separate collection" for all batteries and accumulators. There is a risk of explosion if the battery is incorrectly replaced. To reduce the risk of fire, explosion, or leakage of flammable liquid/gas, do not disassemble, crush, puncture, short external contacts, expose to temperatures above 60°C (140°F), sunshine, or similar, expose to extremely low air pressure, or dispose of in fire or water. Replace only with specified batteries.
FCC Statement
This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Radiation Exposure Statement: The highest SAR value reported under this standard during product certification for use next to the head with a minimum separation distance of 0mm. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter.
Declaration of Conformity
Anker Innovations Limited declares that this product is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at https://www.soundcore.com.
- Maximum output power (Bluetooth): 9dBm
- Frequency band (Bluetooth): 2.4G band (2.402GHz-2.480GHz)
- WPT Operate Frequency: 110KHz-205KHz
- H-Field Strength: 26.29 dBuA/m @3m
Hazardous Substances Information
The document includes a table detailing the presence of restricted substances and their chemical symbols in various components of the product, in accordance with Chinese regulations (SJ/T 11364 and GB/T 26572).
This table indicates whether the content of hazardous substances in homogeneous materials is below or exceeds specified limits. A Ⓘ symbol indicates compliance, while ⨯ indicates exceeding the limit.
soundcore Headphones & Speakers - Hear it, Feel it - soundcore US
soundcore Headphones & Speakers - Hear it, Feel it - soundcore US
