Orbit Retro Speaker OR1086NS User Manual

Important Safety Precautions

• Read all instructions before using the speaker.
• Do not use near water; clean with a soft cloth.
• Do not place on wet surfaces.
• Adult supervision required for children.
• Do not expose to excessive heat, flames, or fire.
• Press buttons carefully; do not manhandle.
• Avoid extremely dry environments to prevent static discharge.
• Do not expose to temperatures above 40°C (104°F) or direct sunlight.
• Do not attempt self-repair; contact a qualified service center.
• Do not drop, puncture, or expose to excessive trauma.
• Not intended for commercial use.
• Keep away from strong magnetic fields.
• Unplug when not in use for extended periods or during lightning storms.
• Clean with a soft cloth; avoid harsh chemicals. Ensure dryness before charging.
• Recycle or dispose of properly according to local laws.

Battery Warning

The device has an integrated lithium-ion battery that cannot be replaced. Do not attempt to remove it. Do not dispose of in fire, expose to excessive heat, crush, puncture, incinerate, or short-circuit external contacts. Please recycle or dispose of the battery properly.

Introduction

Thank you for purchasing the Orbit Bluetooth Radio Speaker, item OR1086NS. This speaker allows you to stream music from most smartphones and Bluetooth-enabled devices. Please read this manual before use for optimal results.

Package Contents

• Orbit OR1086NS Bluetooth Speaker
• USB Charging Cable
• User's Manual with Warranty Information

Specifications

• Bluetooth Version: 5.0
• Bluetooth Range: Up to 33 feet (10 meters)
• Input: DC5V/200-400MA
• Frequency: 2.4Ghz
• Battery Type: 3.7V 300MA Lithium
• Functions: Bluetooth, Hands-Free Phone Answer
• Charge Time: Approximately 1.5 Hours
• Play Time: Approximately 2.5 Hours* (at 50% volume; results may vary)

A Quick Look at Your Device

The speaker features the following controls and indicators:

• Speaker: The main audio output.
• Last Track button: Press to return to the previous track.
• On/Power button: Press and hold to turn the speaker on or off.
• Next Track button: Press to advance to the next track.
• Play/Pause/Answer Calls button: Press to play or pause music, or to answer/end calls.

Charging Your Speaker

To charge your speaker, follow these steps:

1. The USB charging cable has a standard USB plug and a Micro USB plug.
2. Insert the Micro USB plug into the charging port on your speaker.
3. Insert the standard USB plug into a computer's USB port or a suitable USB charging adapter.
4. The charging indicator light will turn [red light] while charging and turn [light off] when charging is complete.

Notes:

• Remove the charging cable once charging is complete.
• Overcharging may reduce battery life.
• A charged battery loses capacity if not used regularly. Charge at least once every six months to avoid complete discharge.

Bluetooth Pairing

To connect your device via Bluetooth:

1. Press and hold the On/Power button for 3-4 seconds to power on the speaker.
2. The LED indicator light will flash white rapidly [white rapid flash], indicating the speaker is in pairing mode.
3. On your smartphone or Bluetooth device, go to the Bluetooth settings menu and ensure Bluetooth is turned on. Connect to the device listed as "Orbit1086".
4. Once paired, the LED indicator light will remain white and shine steadily [white steady]. The light may blink slowly when music is playing.

Using Your Speaker

Once paired, you can control your audio playback:

• Press the Play/Pause button ▶️ to play or pause the current track.
• Tap the Last Track button ⏪ to go to the previous track in your playlist.
• Tap the Next Track button ⏩ to go to the next track in your playlist.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.