3 in 1 Wireless Charging Station

Instruction Manual

PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE

Getting started

• Remove the product from the box.
• Please retain all packaging after you have checked and counted all the parts and the contents against the list.

Package Contents

• 3 in 1 Wireless Charging Station
• USB Charging Cable
• Instruction Manual

Operation

• Connect the 3 in 1 Wireless Charging Station with the USB charging cable (Included) and the other end of the cable to the power adaptor (NOT INCLUDED). The product enters the normal working state once the indicator flashes twice, and enters standby mode after the indicator lights off.
• Smart Phone: Place your Qi-enabled smartphone at the centre of the wireless charging station. The blue LED indicator will turn on once your phone is fully charged, and the LED indicator will turn off.
• Apple Watch: Place your Apple Watch in a way that the back of the watch makes contact with the watch charging area of the wireless charging station.
• Airpods/Samsung Earphones: Place your compatible Airpods or Samsung Earphones Charging Case on the Earphone Charging Area. The blue LED indicator will turn on once your earphone is fully charged, and the LED indicator will turn off.

Specifications

• Input: DC 5V/3A, 9V/3A, 12V/2A
• Output for Phone: 15W/10W/7.5W/5W
• Output for Earphone: 5W
• Output for Apple Watch: 2.5W
• Dimension: 82mm x 123mm x 130mm
• Charging efficiency: 73%
• Transmission distance: ≤6mm
• Work frequency: 112-205KHz

Safety Notice

• Do not squeeze or collide.
• Do not disassemble or put into fire, water, to avoid short-circuit leakage.
• Do not use wireless chargers in severe high temperature, humidity, or corrosive environments to avoid leakage of damaged circuits.
• Do not place too close to magnetic cards (ID cards, bank cards, etc.) with magnetic strips or chips to avoid magnetic card failure.
• Keep more than 20cm between the implanted medical device (pacemaker, implantable cochlea, etc.) and the wireless charger to avoid potential disruption to medical devices.
• Keep children from the product in case they play the wireless charger as a toy to avoid accidents.
• Keep the wireless charger and receiver device away from water and other liquids.
• To clean the charger, make sure the power supply is disconnected.
• Usage temperature: 0-45°C.
• Usage humidity: 20-85% (40°C)
• The pictures involved in this manual are all illustrations. The final product is subject to the actual object.

FCC ID: 2A9QP-OR1149

Warning:

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Distributed by:

ORBIT Innovations LLC
148 WEST 37TH STREET
14TH FLOOR
NEW YORK, NY 10018