TRUE WIRELESS EARBUDS
Instruction Manual
Orbit Innovations
Model: TWSSQUPM52
Product Instructions
1. Connection and Pairing
To connect and pair the earphones with your mobile phone: Open the charging compartment or remove the earphones. Both earphones will light up, with one turning off and the other flashing. Bring the earphones close to your phone, turn on your phone's Bluetooth, search for the earphone device name ("TWSSQUPM52" or similar), and connect. Once successfully connected, both earphones will stop flashing.
2. Charging Instructions
When the charging compartment is charging, its indicator light will flash. The light goes out when fully charged. When the charging compartment charges the earphones, its indicator light remains on. The compartment's indicator light goes out after the earphones are fully charged.
Specifications
| Bluetooth Version: | V5.4 + EDR |
| Supported Protocols: | A2DP1.3/HFP1.6 / HSP1.2 / AVRCP1.6 / D11.3 |
| Bluetooth Frequency: | 2.4GHz |
| Bluetooth Transmission Distance: | 10-15 Meters |
| Rated Input: | 5V = 1A |
| Microphone Sensitivity: | -42db |
| Operating Temperature: | -10°C / 50°C |
| Horn Impedance: | 32Ω |
Controls
| Function | Action |
|---|---|
| Switch Songs | Double-click the left earphone for the previous song; double-click the right earphone for the next song. |
| ON/OFF | Long press for 5 seconds to shut down; long press for 3 seconds to turn on. |
| Play/Pause/Answer/Hang Up | Single click the left or right earphone. |
| Volume + / - | Triple click the right earphone to increase volume; triple click the left earphone to decrease volume. |
| Refuse to Answer Calls | Touch and hold for 2 seconds. |
| Siri Function | Press and touch the left or right earphone for 3 seconds. |
| Earphones Pairing | 1. Take earphones out of the charging compartment. 2. Turn on mobile phone Bluetooth. 3. Bring earphones close to the phone and search for the device name. 4. Click the device name to pair. 5. If pairing fails, return earphones to the compartment, close lid, remove again, wait 5-8 seconds for automatic pairing, then connect via phone. |
Precautions
- Store earphones in a dry, ventilated environment, avoiding oil, water, moisture, and dust.
- Do not use stimulus, organic solvents, or items containing these to clean the earphones.
- Use earphones according to specifications. Maintain a distance of within 10 meters between earphones and phone for a stable connection.
- If earphones fail to connect or have poor connection, do not attempt to disassemble them or accessories, as this voids the warranty.
- Use the standard USB cable or the company-appointed charging cable for charging.
- Ensure sufficient power for normal use.
Regulatory Information
FCC Compliance
FCC ID: 2BQBT-TWSSQUPM52
FCC Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.
Certifications
The product is marked with FC, CE, and ROHS certifications.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Any use of such marks by ORBIT INNOVATIONS is under license.
Cocoa Puffs and associated words and designs are trademarks of General Mills, used under license.
Manufactured by: ORBIT INNOVATIONS, 226 WEST 37TH STREET, NEW YORK, NY 10018
