SIIG Heavy Duty Desk Mount Single Monitor Arm - Up to 49"
Parts List
- A: x1
- B: M5x30 x1
- C: x1
- D: x1
- E: x1
- F: x1
- H: M4x10 x4
- I: x1
- J: x1
- Hardware: #3 x4, #4 x6, #6 x1
Installation Instructions
Clamp Installation
Attach the clamp to the desk. Ensure the clamp is securely fastened. Use the provided screws (#4) for installation. Do not overtighten the screws unilaterally.
Step 1: Place the clamp base on the desk edge.
Step 2: Insert screw #4 and tighten.
Step 3: Ensure the clamp is level and secure.
Base Installation
Connect the arm base to the clamp. Insert screw I and D, and secure with screw J.
Arm Installation
Attach arm components E, C, and B using screw #4.
VESA Plate Installation
Mount the VESA plate (A) to the monitor using screws H. Ensure the VESA plate is compatible with your monitor's 75x75mm or 100x100mm mounting pattern.
Monitor Attachment
Secure the monitor to the arm. The mount supports flat screens weighing between 4.4 lbs to 44 lbs (2 kg to 20 kg). The arm can be locked or unlocked.
Cable Management
Route cables neatly through the designated channels on the arm for a clean setup.
Adjustments
Tension Adjustment
Adjust the tension based on the monitor's weight:
- For monitors < 3 kgs / 6 lbs, use the adjustment screw (1) to decrease tension.
- For monitors between 3 kgs / 6 lbs and < 15 kgs / 33 lbs, use the adjustment screw (2) to increase tension. The scale mark for 15kgs/33lbs can support up to 20kgs/44lbs.
Tilt Adjustment
Adjust the tilt angle using screw #4.
Rotate Adjustment
Adjust the rotation angle using screw #4.
Support
For more information or technical support, visit: http://www.siig.com/support
Warranty: THREE YEAR Manufacturer Warranty
