SPACEWALK 1 LITE Walking Treadmill
USER MANUAL
Model: URTM022
Manufacturer: Shenzhen Yile Dynamic Technology Co., LTD.
Address: 1205-1206, Tianliao Building, Tangchang Road, Tanglang Community, Taoyuan Street, Nanshan District, Shenzhen, China
Version: 3.0
[FC Logo] [CE Logo] [MADE IN CHINA]
[UREVO SPORTS Logo]
Table of Contents
1 CUSTOMER SERVICE
IMPORTANT: FOR UREVO ONLY
For damaged or defective product, questions, replacement parts or any other service support, please contact our customer service department by the below methods:
- Email: services@urevo.com (Response Time: 24-48 hours)
- Website: www.urevo.com
- US Support Hotline: (1)844-998-2473
- Hours of Operation: Monday - Friday: 9 AM - 12PM; 1 PM - 6PM (PST)
Emailing us with the Order ID will be the best method to receive a response during peak business hours.
PLEASE DO NOT RETURN THIS PRODUCT WITHOUT ASKING OUR CUSTOMER SERVICE FIRST.
Scan this QR code to get the product installation or maintenance videos: [Link to Urevo YouTube Video]
2 IMPORTANT SAFETY INSTRUCTIONS
DANGER - To reduce the risk of electric shock:
Always unplug this appliance from the electrical outlet immediately after using and before cleaning.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons:
- An appliance should never be left unattended plugged in. Unplug from outlet when not in use, and before putting on or taking off parts. [Power Symbol]
- Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons.
- Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled persons.
- Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
- Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to a service center for examination and repair.
- Do not carry this appliance by supply cord or use cord as a handle.
- Keep the cord away from heated surfaces.
- Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the like.
- Never drop or insert any object into any opening.
- Do not use outdoors.
- Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
- Caution - To reduce the risk of injury from moving parts - Unplug before servicing. [Power Symbol]
- Warning - To reduce the risk of Electric shock - Unplug before cleaning or servicing. [Power Symbol]
- Warning - Risk of personal injury - Keep children under the age of 13 away from walking treadmill.
- To disconnect, turn all controls to the position, then remove plug form outlet.
- Connect this appliance to a properly outlet only. See grounding instructions.
- This appliance is not intended for use by persons with reduces physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Keep children under the age of 13 away from this walking treadmill.
- The maximum weight capacity for this product is 264.5lbs/120kg. DO NOT EXCEED MAXIMUM WEIGHT CAPACITY.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS:
This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product - if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
FCC STATEMENT:
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
(3) Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with RSS247 of Industry Canada. Cet appareil se conforme à RSS247 de Canada d'Industrie.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.
Radiation Exposure Statement: The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
Déclaration d'exposition aux radiations: Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les États-Unis et le Canada établies pour un environnement non contrôlé. Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut être augmentée s'il l'appareil peut être conservé aussi loin que possible du corps de l'utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle fonction est disponible.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
3 SAFETY NOTICE
Visual descriptions of safety notices:
- [Clearance Indicator]: With at least 3.28 ft. (1.0m) of clearance behind.
- [Clearance Indicator]: With at least 2 ft. (0.6 m) clearance on each side.
- [Warning Symbol]: Do not use on uneven ground.
- [Warning Symbol]: It is strictly forbidden to walk up and down the walking treadmill while walking.
- [Warning Symbol]: Trampling the treadmill lid is prohibited.
- [Warning Symbol]: Do not storage as stand up.
- [Warning Symbol]: Always wear athletic shoes.
- [Power Symbol]: Unplug from outlet when not in use.
- [Warning Symbol]: Do not storage as side stand.
4 SPECIFICATION
Visual descriptions of safety notices:
- [Warning Symbol]: Be carefully of elderly and pregnant woman use.
- [Warning Symbol]: Never allow more than one person on the treadmill at a time.
- [Warning Symbol]: Do not walking with pets.
- [Warning Symbol]: Do not transverse motion.
- [Warning Symbol]: Children use MUST be under supervised.
- [Warning Symbol]: Do not backward motion.
Performance Indicators | Detailed Parameters | Performance Indicators | Detailed Parameters |
---|---|---|---|
Product dimension | 121 X 53 X 12.4 cm 47.63 X 20.87 X 4.88 inch | Net weight | 18.5 kg 40.8 lbs |
Walking Area | 100 X 40 cm 39.37 x 15.75 inch | Gross weight | 21.7 kg 47.9 lbs |
Rate voltage | 110-120V ~ | Maximum load | 120 kg 265 lbs |
Rated power | 550W | Maximum speed | 4 mph |
Peak horsepower | 2.25Hp | Minimum speed | 0.6 mph |
Suggested age | 14-60 years old |
5 PRODUCT AND ACCESSORIES
Please carefully check whether the contents of the package are complete and intact. If there is any missing and damage, please contact the seller.
Accessories:
- Walking treadmill × 1
- Hex Tool × 1
- User Manual × 1
- Remote control × 1
- Power Cord × 1
- Lubricating Oil × 1
[UREVO Logo]
6 PRODUCT INTRODUCTION
The walking treadmill includes the following components:
- Walk Belt
- Adjustable Feet Pad
- Cushion
- Power Switch
- Remote Control
- Power Socket
- Transport Wheel
7 BEFORE START AND STORAGE
Take out appliance from packages:
- Unbox and take out accessory box.
- Lift out appliance and place at flat surface. Attention: 2-3 persons assist is necessary.
- It's normal that visible welding marks residual on walk belt.
Transportation:
- If transportation needs, unplug power cord and lifting the terminal of appliance.
- Easy to transport appliance with bottom transportation wheel assists, like as wheelbarrow.
Connect the power:
- Choose flat ground to place the Walking Treadmill. Do not place it on thick and soft cushion.
- Plug in power cord and switch on power rock button [Power Symbol]. You can hear a Bi sound from buzzer, it means the circuit of appliance has connected with power electricity.
Storage:
Power off appliance [Power Symbol] and unplug power cord before storage process.
Warning: MUST use power cord that comes with the package.
Warning: Before starting to workout with this product, please assess your physical condition and perform exercise properly and regularly. Incorrect or excessive training can be harmful to your health. If you feel unwell, stop exercising immediately and consult with your doctor.
9 REMOTE CONTROL
A magnetic built-in remote control can be stuck in the storage cavity of the side body.
Remote Control Buttons:
- Start/Stop/Pause: Controls starting, stopping, and pausing the treadmill.
- Mode: Allows customization of countdown workout programs (e.g., Time, Distance, Steps, Calories).
- Accelerate: Increases speed continuously with a long press (>0.5 seconds).
- Decelerate: Decreases speed continuously with a long press (>0.5 seconds).
- Mute: Short press to mute buzzer voices.
10 HOW TO USE
Note: Ensure that the walking treadmill is powered on and the remote control is installed with batteries.
1. Operation of Remote Controller
Buttons | Functions | Operation | Note |
---|---|---|---|
Start (▶) | Start | Short press | Start the walking treadmill. |
Stop | Long press for 2" | When the walking treadmill stops (all datas recover to 0), the screen will display "END". 10 minutes later, the system will switch to the economic mode and turn off the display screen; Press any buttons to wake up the treadmill. | |
Pause (||) | Pause | Short press (in start mode) | The screen will display "PAU". Previous workout metrics will be preserved automatically if pause time no longer than 10 minutes, otherwise metrics data will be recovered to "0". Press any buttons to wake up the treadmill. The treadmill will re-start at the minimum speed by re-pressing ▶. |
M | Mode | Short press | Customize countdown workout programs (like as: Time; Distance; Steps; Calories). |
+ | Accelerate | Short press | Long press over 0.5 seconds, the speed will be increased continuously. |
- | Decelerate | Short press | Long press over 0.5 seconds, the speed will be decreased continuously. |
Mute | Mute | Short press | Muted buzzer voices. |
2. Error Code
When an error occurs, the error warning indicator will light up and display its error code. Once an error code and alarm happen, you MUST stop workout immediately. Please contact after-sale service if the problem CAN NOT be solved after restart.
Error Code | Fault Analysis | Resolutions |
---|---|---|
E02 | Mosfet breakdown | When the walking treadmill stop (all datas recover to 0), the screen will display "END". 10 minutes later, the system will switch to the economic mode and turn off the display screen; Press any buttons to wake up the treadmill. |
E05 | Flame protection | Unscrew motor hood and verify connection between controller and motor, otherwise please contact with after sale service. |
E06 | Motor open circuit | Unscrew motor hood and verify the motor terminals connection. Otherwise please contact with after sale service. |
E07 | Communcation interrupted | Unscrew motor hood to verify signal cable whether was pinched or terminal loosen. |
E08 | Overloading protection | 1. User weight over limited 120KG. 2. Removal foreign bodies which causes of roller or walking belt. 3. Inject lubricants. |
11 TROUBLESHOOTING
Problem | Fault Analysis | Resolutions |
---|---|---|
No working | 1. Power rock switch dyfunction 2. Power supply interrupted. 3. Power cord damaged | 1. Replace new power rock switch if it doesn't light on. 2. Make sure that power cord is plugged into properly grounded outlet. 3. Replace new power cable. |
Walking belt slips | Walking belt loosen | Tighten walking belt tension with hex tool. (See details of chapter 13-A) |
Remote control does not work | 1. Incorrect use of default 2. Battery power shortage. 3. Remote control malfunction | 1. Replace new battery cells. 2. Replace new remote control. |
Friction noise | Walking belt off center. | See details of chapter 13-A. |
WORKOUT WITH FITNESS APP
The Spacewalk E3 walking treadmill has integrated Bluetooth® 5.0 connectivity, allowing it to work with the Urevo App or other Fitness Apps (compatible with Zwift and Kinomap App).
With the Urevo App, you can access workout data through your device when synced to the console. You receive workout reports on your device for coaching your exercise planning. The Urevo App also offers a variety of professional courses.
- Scan QR code to download and install Urevo Fitness APP. [QR Code for Urevo Fitness App]
- Free of charge to create membership and log in.
- Bluetooth connectivity: Connect the walking treadmill to your device.
- Connected: solid light
- Searching or failed connection: flashing
- Updating: quick flashing
- Enjoy your exercises.
12 WARM-UP EXERCISE
Before exercising, it's better to do stretching exercises first. A successful exercise plan must include warm-up, aerobic, and relaxation exercises. The number of exercises should be at least two or three times a week. You can take a day off for exercise. After a few months, you can increase the number of exercises to four to five days a week.
Warm-up is an important part of your fitness exercise. Warm-up before every exercise. Moderate warming-up can prepare your body for the next more intense exercise, because warming-up can help muscle warm up and stretch, improve blood circulation and pulse, and send more oxygen into muscle. Repeated warm-up exercise can also reduce muscle soreness after aerobic exercise. We recommend the following warm-up and relaxation exercises.
- Stretch downward: Bend your knees slightly and bend your body forward slowly. Relax your back and shoulders and touch your toes with both hands. Hold for 10 to 15 seconds, then relax. Repeat three times. [Illustration of stretch downward]
- Stretch your ankles: Sit on a clean cushion and straighten one leg. Put the other leg inward so that it is close to the straight leg. Try to touch your toes with your hands. Keep it for 10 to 15 seconds. Then relax. Repeat each leg three times. [Illustration of ankle stretch]
- Calf/Achilles Stretch: Extension of the calf and foot tendons: body forward, hands against the wall, the left leg arches forward, the right leg is straight, the left leg is on the ground, then bend your left leg and hold it for 10 to 15 seconds, then relax, repeat each leg three times. [Illustration of calf stretch]
- Head movement: 1-tilt your head to the right and feel the left neck muscle stretch; 2-turn head to the back; 3-turn head to the left; 4-turn your head to front of the chest. Then relax and do it three times. [Illustration of head movement]
- Waist movement: Stretch your arms to the left and right, then slowly lift it up, over your head. Put your right arm as far as possible to the ceiling. Straighten, hold for 1 second, and feel the stretch of your right muscle. Repeat the same action on the left arm. [Illustration of waist movement]
13 CARE AND MAINTENANCE
A. Symptom: walk belt off centered or slips.
Centering walk belt process as follow:
- Power off appliance and unplug the power cord. [Power Symbol]
- Manual centering process as follow:
- If the walk belt has shifted to left, use the hex tool to turn the left idler roller screw clockwise 1/4 of a turn.
- If the walk belt has shifted to right, use the hex tool to turn the right idler roller screw clockwise 1/4 of a turn.
- Appliance MUST work 1-2 minutes. Repeat manual centering process until the walk belt is centered.
Belt slip correcting process as follow:
- Power off appliance before operation. [Power Symbol]
- Using the hex tool, turn both idler roller screws clockwise 1/2 of a turn.
- After corrected, please attempt to walking 1-2 minutes under 1.0mph speed setting. Repeat until the walk belt is properly tightened.
Attentions:
- To prevent any injury, don't place any debris around appliance before maintenance process.
- MUST use associated hex tool.
- Take care at maintenance process. Do not pinch fingers.
B. Belt lubrication process, follow instruction below to lubricate belt.
- Power off appliance and unplug cord. [Power Symbol]
- Using the hex tool, turn both idler roller screws counterclockwise till belt loosen and lifting easily.
- Lifting edges of belt and spraying lubrication oil at center of walk platform evenly. Not necessary to apply spray lubrication oil on entire walk platform.
- Lubrication oil volume Per time of maintenance: 5-10mL. Attention: it would cause belt slip if spray too much.
- Using the hex tool, turn the both idler screws clockwise as previous markdown number of turns until walk belt tighten properly.
- Power on appliance and workout for a few minutes, in order to spread lubrication oil to whole belt surface evenly.
Lubrication frequency: High recommend 125 Miles Per time.
C: Appliance cleaning.
- Power off appliance and unplug power cord before cleaning. [Power Symbol]
- Wipe and clean with damp cloth. Do not cleaning with acidic or caustic detergents.
- Do not clean opposite of walk belt.
- It's normal few black powders residual under appliance after long working.
14 WARRANTY
MANUFACTURER'S LIMITED WARRANTY
UREVO warrants to the original purchaser that this product is free from defects in material and workmanship when used for the purpose intended, under the conditions that it has been installed and operated in accordance with UREVO Owner's Manual. UREVO's obligation under this warranty applies to the following:
COMPONENT LENGTH OF WARRANTY
- Structural Frame: 1 year (For Home Use Only)
- All Other Components: 90 days (For Home Use Only)
Exclusions from Warranty Coverage:
UREVO does not warrant against and is not responsible for, and no implied warranty shall be deemed to cover, any product failure, product malfunction, or damages attributable to:
- 5. Improper installation and/or failure to abide by UREVO's installation guidelines;
- 6. Use of this product beyond normal home use, or in an application for which it was not designed;
- 7. Cosmetic items such as scratches, dents or discolorations;
- 8. Damage caused by normal wear and tear, vandalism, accidental or by animals;
- 9. Any act of Nature (such as fire, flooding, snow, ice, hurricanes, earthquakes, lightnings or other natural disasters), environmental condition (such as air pollution, mold, mildew, etc.), or staining from foreign substances (such as dirt, grease, oil, etc.);
- 10. Normal weathering due to exposure to sunlight, weather and atmosphere which can cause colored surfaces to among other things, flake, chalk, accumulate dirt or stains.
- 11. Improper operation, alteration, handling, storage, abuse or neglect of the products.
UREVO, using its sole discretion, will either repair or replace free of charge any part(s) proven to be defective under normal home use. Any repair or replacement shall provide no new warranty coverage, but shall retain only the remaining portion of the original product's warranty. This warranty is offered only to the original purchaser and is not transferable. Proof of original purchase is required.
When ordering replacement parts please have the following information ready:
- Order Number
- Description of Parts (Adding photos or videos would be helpful)
- Part Number
- Date of Purchase