FoldiMix 5L Pro Smart Treadmill
User Manual
Product Overview
This user manual provides instructions for the UREVO FoldiMix 5L Pro, a 2-in-1 auto incline folding smart treadmill.
Manufacturer: Shenzhen Yile Dynamic Technology Co., LTD.
Model: URTM045
Brand: UREVO
Key Features: 2-in-1 functionality, Auto Incline, Folding, Smart Treadmill.
App Integration: Supports UREVO SmartCoach App for enhanced features and longer warranty.
Availability: Download the app from [App Store] or [Google Play].
Important Safety Instructions
Always follow these safety precautions when using the treadmill:
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
- Ensure a minimum clearance of 1.2 meters (approx. 4 feet) around the treadmill on the sides and front, and 2.0 meters (approx. 6.5 feet) at the rear for safe operation.
- Ensure no adjustment devices are left projecting, as they could interfere with the user's movement.
- Noise emission is higher under load than without load. Airborne noise is ≤65dB.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised or instructed by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance.
- Use only manufacturer-approved replacement parts that could affect the safe use of the treadmill.
- The maximum weight capacity for this product is 120kg (265 lbs). DO NOT EXCEED MAXIMUM WEIGHT CAPACITY.
Customer Service
For support regarding damaged or defective products, questions, replacement parts, or any other service needs, please contact UREVO customer service:
- US Email: services@urevo.com
- EU Email: service_eu@urevo.com
- Response Time: 24-48 hours
- Website: www.urevo.com
- US Support Hotline: +1 (844) 998-2473 (Monday-Friday 9 AM-6 PM PST, Saturday-Sunday 7 AM-4 PM PST)
Note: Emailing with your Order ID is the best method for faster responses during peak hours. Please do not return the product without contacting customer service first.
Scan the QR code to access product installation or maintenance videos, or visit the Urevo YouTube channel.
UREVO SmartCoach App
Unlock more exciting features and fitness modes by scanning the QR code to download and connect the UREVO SmartCoach App.
App Connection Steps:
- Turn on your phone's Bluetooth.
- Open the UREVO SmartCoach APP and follow the on-screen instructions to add your device.
Bluetooth Status:
- Connected: Solid light
- Searching or failed connection: Flashing light
- Updating: Quick flashing light
Product & Accessories
Please check the package contents carefully for completeness and integrity. Contact the seller if any items are missing or damaged.
Included Accessories:
- 1. Treadmill Unit
- 2. Remote Controller
- 3. Power Cord
- 4. Hex Tool
- 5. Tablet Mount
- 6. AAA Size Batteries (x2)
- 7. Lubricating Oil
- 8. Safety Key
- 9. User Manual
Diagram shows all listed accessories.
Specification
| Product Configuration | Detailed Parameters |
|---|---|
| Product dimension (Folded down) | 158 x 70 x 14 cm / 62.2 x 27.6 x 5.5 inches |
| Product dimension (Folded up) | 148 x 70 x 119 cm / 58.3 x 27.6 x 46.9 inches |
| Running area | 40 x 120 cm / 15.8 x 47.2 inches |
| Gross weight | 41 kg / 90.4 lbs |
| Net weight | 34.5 kg / 76.1 lbs |
| Maximum speed | 13.4 km/h / 8.4 mph |
| Minimum speed | 1 km/h / 0.6 mph |
| Maximum load | 120 kg / 265 lbs |
| Rate voltage | 220-240V ~ |
| Peak horsepower | 3.0 Hp |
| Rated power | 735W |
Warning: Risk of personal injury. Keep children under the age of 13 away from the machine.
Product Introduction
The treadmill features the following components:
- Console Area: Includes Tablet Mount, Console display, Upright support, Armrest (detachable), Handrail Holder, and Safety Stop cord.
- Treadmill Deck: Features the Walking Belt, Foot rail, Feet Pad, and Rear Roller Protective Cover.
- Base Unit: Contains the Main Body, Folding Knob, Front Protective Cover, Display Screen, Power Socket, Power Switch, Adjustable Incline System, and Transport Wheel.
Diagrams illustrate the placement of these components.
How To Use
Unfolded To Run (Speed range: 1.0 - 13.4 km/h)
Ensure the treadmill is placed on flat ground after unpacking.
- Prepare for unfolding: Twist the folding knobs on both sides until they loosen.
- Lift handrail: Lift the handrail until it reaches its end position.
- Secure handrail: Re-twist the folding knobs until tightened. Rotate the handrail holders below the foot rail to secure them (same on both sides). The handrail must be firmly secured before running.
- Attach armrests: Remove the armrest hole covers, store them, then screw the armrest bars in completely.
- Install tablet mount: Attach the tablet mount to the designated slot.
Connect the power
Plug the power cord into the power connector. Turn on the power switch to begin.
Safety stop (cord type)
In case of an emergency, the treadmill will stop automatically if the safety key is pulled from the console. Attach clip (A) to your waistband and the magnetic key (B) to the console.
Folded To Walk (Speed range: 1.0 - 6.0 km/h)
- Detach the tablet mount.
- Unscrew and store the armrest bars properly, then replace the armrest hole covers.
- Rotate the handrail holders outward, then twist the folding knobs until loose (same on both sides).
- Fold down the handrail assembly in reverse order.
- Re-twist the folding knobs until tightened (same on both sides).
The treadmill is now in walking mode. Use the remote control for operation.
Auto Incline & Transportation
Auto incline feature introduction
The treadmill offers 9 adjustable incline levels. You can change the incline to suit your workout needs.
Reminder: Set the incline level to 'Zero' after exercise. A Power On Self Test (POST) can help reset the incline to zero automatically.
Transportation
To move the treadmill: Unplug the power cord and remove the tablet mount. Use the built-in transport wheels to easily move the treadmill, similar to a wheelbarrow. Ensure the power switch is off and the power cord is unplugged before moving or storing.
Remote Control Operation
Ensure the treadmill is powered on and the remote control has batteries installed.
Remote Control Buttons:
- ▶️ (Start): Starts the treadmill.
- ■ (Stop): Stops the treadmill. The display shows "End" and the belt slows to a complete stop. The display turns off if the stop status lasts longer than 10 minutes.
- ⏸️ (Pause): Pauses the workout. The belt slows to a stop, displays "PAU", and preserves workout data. Press again to resume. The display turns off if the pause lasts longer than 10 minutes.
- ▲ / + (Incline Increase): Increases the incline level.
- ▼ / - (Incline Decrease): Decreases the incline level.
- + (Speed Accelerate): Short press to accelerate speed. Long press for continuous speed increase.
- - (Speed Decelerate): Short press to decelerate speed. Long press for continuous speed decrease.
- MUTE: Mutes buzzer sounds.
- MODE: Selects countdown workout programs (e.g., Time, Distance, Calories).
Connection Instructions: Turn off the treadmill power. Hold the "+" and "MODE" buttons together until the indicator flashes rapidly. Turn on the treadmill power; it will connect automatically.
Display Screen & Console
The treadmill console displays key workout information:
- SPD (Speed): Displays the walking belt speed (1.0-13.4 km/h).
- DIST (Distance): Displays the distance covered (00.00-99.99 km).
- TIME: Displays the elapsed workout time (00-99.59 minutes).
- KCAL: Displays the approximate calories burned (0-6553 Kcal).
- STEP: Displays the number of steps (for reference only) (0-9999).
- INC (Incline): Displays the current incline level (0-9 levels).
Workout data may be displayed in a rotating carousel.
Standby Mode: If the treadmill is paused for over 10 minutes, it enters standby mode ("0000") and resets data. If inactive for another 10 minutes, it enters sleep mode. Pressing any key will return it to standby.
Console Buttons: The console features buttons for incline adjustment (▲/▼), program selection (PROG), start/stop (▶️/■), and pause (⏸️), speed adjustment (+/-).
Treadmill Modes
The treadmill offers various pre-set programs for different workout types:
| Program | Segment | Time (sec) | Incline (%) | Speed (km/h) |
|---|---|---|---|---|
| P01 (Fat Burn) | 1-10 | 180 | 0.0 to 6.0 (varied) | 1.5 to 6.0 (varied) |
| P02 (Hill Climb) | 1-10 | 180 | 0.0 to 9.0 (varied) | 1.5 to 4.5 (varied) |
| P03 (Take a walk) | 1-10 | 180 | 0.0 to 3.0 (varied) | 1.5 to 3.0 (varied) |
| P04 (Fast fat burning) | 1-10 | 180 | 0.0 to 3.0 (varied) | 3.2 to 10.4 (varied) |
| P05 (Morning jog) | 1-10 | 180 | 0.0 to 3.0 (varied) | 3.2 to 8.0 (varied) |
| P06 (Explosive running) | 1-10 | 180 | 0.0 to 9.0 (varied) | 3.2 to 12.2 (varied) |
The walking mode offers three programs (P01-P03), and the running mode offers six programs (P01-P06).
Care & Maintenance
Belt Centering and Slip Correction
Symptom: Walk belt off centered or slips.
Centering Process:
- Power off and unplug the treadmill.
- Manual Centering: If the belt has shifted left, use the hex tool to turn the left idler roller screw clockwise by 1/4 turn. If shifted right, turn the right idler roller screw clockwise by 1/4 turn.
- Run the treadmill for 1-2 minutes. Repeat the manual centering process until the belt is centered.
Belt Slip Correction:
- Power off the treadmill.
- Using the hex tool, turn both idler roller screws clockwise by 1/2 turn.
- After correction, walk for 1-2 minutes at a speed of 3-4 km/h. Repeat until the belt is properly tightened.
Attention: Do not overtighten the belt, as it may cause damage.
General Attentions: Do not place debris near the treadmill during maintenance. Always use the associated hex tool. Be careful not to pinch fingers.
Belt Lubrication
Follow these instructions to lubricate the belt:
- Power off and unplug the treadmill.
- Loosen both idler roller screws counterclockwise using the hex tool until the belt can be lifted easily. Note the number of turns for re-tightening.
- Lift the edges of the belt and spray lubricant evenly onto the center of the walking platform (5-10mL per maintenance). Avoid spraying the entire platform.
- Caution: Excessive lubricant may cause belt slip.
- Tighten the idler roller screws clockwise by the number of turns noted earlier.
- Power on the treadmill and run for a few minutes to distribute the lubricant evenly across the belt surface. Hold the handrail when running at 6 km/h.
Lubrication Frequency: Recommended every 200 km.
Treadmill Cleaning
- Power off and unplug the treadmill before cleaning.
- Wipe clean with a damp cloth. Do not use acidic or caustic detergents.
- Do not clean the underside of the walking belt.
- It is normal to find some black powder residue under the treadmill after extended use.
Error Code
When an error occurs, the error warning indicator will light up and display the error code. Stop the workout immediately if an error code and alarm sound occur.
| Error Code | Fault Analysis | Resolutions |
|---|---|---|
| E01 | Communication interrupted between controller and numeric display. | Unscrew motor hood, verify connection. Contact after-sales service if unresolved. Power off and unplug before handling. |
| E02 | Open circuit of the motor. | 1. Check motor wire connections to the lower control board. Tighten terminals if loose. 2. Contact after-sales service if unresolved. |
| E04 | Over current protection. | 1. User weight exceeds 120kg. 2. Check for foreign objects blocking moving parts. 3. Belt is overtightened or lacks lubricant. |
| E05 | Communication fault between upper meter and upper control. | Disconnect/reconnect the signal wire between the console and the display screen. |
| E06 | Controller self-check error. | Replace the lower control board. |
| E10 | Safety lock has fallen off. No safety lock signal detected for 1 second. | Check and reinsert the safety lock correctly, or replace it if damaged. |
| E11 | Input voltage abnormal. | Confirm external power supply specifications meet manual requirements. |
| E12 | The gyroscope is faulty. | Fix handrails to the designated position and restart the machine by turning the power switch off and on. |
| E13 | Overtemperature protection. | Turn off the machine and let it cool down. |
| E14 | Motor power phase loss. | Check and reconnect motor connection lines. |
| E15 | Motor short circuit protection. | Check and reconnect motor connection lines. |
Contact after-sales service if problems persist after restarting.
Troubleshooting
| Problem | Fault Analysis | Resolutions |
|---|---|---|
| No working | 1. Power rock switch malfunction. | 1. Replace power rock switch if it does not light up. |
| 2. Power supply interrupted. | 2. Ensure power cord is plugged into a properly grounded outlet. | |
| 3. Power cord damaged. | 3. Replace power cable. | |
| Walking belt slips | Walking belt loosens. | Tighten walking belt tension using the hex tool (refer to Care & Maintenance section). |
| Remote control does not work | 1. Incorrect use of default settings. | 1. Replace battery cells. |
| 2. Battery power shortage. | 2. Replace the remote control. | |
| 3. Remote control malfunction. | ||
| Friction noise | Walking belt off center. | Refer to the Care & Maintenance section for belt centering instructions. |
Warranty
MANUFACTURER'S LIMITED WARRANTY: UREVO warrants the original purchaser that this product is free from defects in material and workmanship when used as intended and operated according to the Owner's Manual.
Component Length of Warranty:
- Structural Frame: 1 year (For Home Use Only)
- All Other Components: 90 days (For Home Use Only)
Exclusions from Warranty Coverage: This warranty does not cover failures or malfunctions attributable to:
- Improper installation or failure to follow UREVO's guidelines.
- Use beyond normal home use or for unintended applications.
- Cosmetic damage (scratches, dents, discolorations).
- Normal wear and tear, vandalism, accidental damage, or damage by animals.
- Acts of Nature (fire, flood, hurricanes, etc.) or environmental conditions (pollution, mold).
- Staining from foreign substances.
- Normal weathering from sunlight exposure.
- Improper operation, alteration, handling, storage, abuse, or neglect.
UREVO will, at its discretion, repair or replace defective parts free of charge under normal home use. This warranty is non-transferable and requires proof of original purchase.
When ordering replacement parts, please provide:
- Order Number
- Description of Parts (photos/videos are helpful)
- Part Number
- Date of Purchase
