Flydigi WASP-N User Manual

Product Overview

This document provides instructions for the Flydigi WASP-N, a mobile game controller designed for iPhones.

Key Components:

• LB Button
• Joystick
• B Button
• A Button
• Logo Button
• LT Button
• Lock mechanism

Accessories

Mapping Ruler: Aids in adjusting virtual button positions before gaming.

Right Angle Gasket: Compatible with 4.7-inch iPhones, enhances field of view.

Package Contents:

• Gamepad
• Mapping Ruler
• USB Cable
• Wasp Lighting Extension
• Right Angle Gasket
• Must Read For Player guide

Using the WASP-N

1. Turn On: Slide the power switch to the left. The indicator light turns orange.
2. Prepare Gamepad: Pull down the switch on the back of the gamepad; the yellow handle will pop up.
3. Prepare iPhone: Turn off the portrait orientation lock on your iPhone.
4. Connect iPhone: Lock your iPhone screen (ensure it is blank) and plug it into the WASP-N.
5. Secure iPhone: Press the yellow handle until your iPhone is securely held.
6. Unlock iPhone: Unlock your iPhone.

Notes:

• WASP-N supports iPhone 6-8 and iPhone 6 Plus-8 Plus.
• Ensure the iPhone screen is blank before plugging it into WASP to avoid repeating connection steps.
• The device enters sleep mode after 10 minutes of inactivity. Press the Logo button to wake it.

Playing Games

Control games downloaded from the App Store directly. The intersection of X and Y axes is the fixed projection point for mapping. Drag game icons (e.g., shooting, aiming) to designated mapping points. The Mapping Ruler assists in precise placement. Enter the game's custom panel, drag any movable icons such as aiming and shooting to the four fixed mapping points to start playing.

Example: For Fortnite, go to the 'HUD Layout tool' in-game. Drag the virtual button to the corresponding mapping location mentioned above. The gamepad buttons are now mapped to these virtual buttons.

Important:

• Only the Left Trigger supports long pressing. Map any action requiring a long press to the Left Trigger's position.
• Most mobile FPS games (e.g., Fortnite, PUBG Mobile) support button customization. For games without customization, joystick control is available.

Wasp Lighting Extension

The Flydigi Wasp Lightning Extension is a special cable for iPhones, allowing headphone use or charging while using the WASP-N.

1. Plug the iPhone lightning cable into the Wasp Lightning Extension.
2. Plug the Wasp Lightning Extension into your iPhone.
3. Install your iPhone into the WASP-N.
4. Plug the lightning cable into a portable power bank for charging.

Usage Notes:

• Follow steps carefully for correct iPhone charging.
• Connect headphones to the Wasp Lighting Extension first before plugging into the phone.

Basic Operation and Indicator Light Description

Technical Specifications

• Model No: Wasp-N
• Compatibility: iPhone 6-8 & 6-8Plus
• Connection: CapAir Mapping; Bluetooth 4.0
• Dimensions: 110*81*19 mm
• Weight: 100g
• Battery Capacity: 300mAh
• Charging Info: 5V/100mA
• Charging Time: 2 hours
• Standing Time: 15 hours
• Operating Current: <20mA
• Operating Environment: 0 °C - 40 °C

FAQ

1. Wasp stops working with your iPhone in it: Ensure the top handle is fastened and the capacitive bar covers your phone screen. Consider using a thinner phone case or removing the case while using Wasp.
2. Buttons fail to work while gaming: Turn off the iPhone screen before placing it into Wasp to avoid inaccurate capacitive sensing or interference.
3. Buttons fail to work while charging the phone: Using a portable power bank for charging is recommended to resolve capacitive interference issues.
4. Earphones fail to work while using the Wasp Cable: Connect earphones to the Wasp Cable first, then plug Wasp Cable into the iPhone.
5. Upgrade Wasp: Wasp operates with the latest firmware. Visit www.flydigi.com for upgrade tools and updates.

More Information

For further questions, please visit:

• Facebook: https://www.facebook.com/Flydigi
• Twitter: https://twitter.com/myFlydigi
• Support/Website: http://www.flydigi.com