SANDTORG Mirror
Important Safety Information
Assembly should be carried out by a qualified person. Incorrect assembly can lead to the furniture tipping over, causing injury or damage. As wall materials vary, screws for fixing to the wall are not included. For advice on suitable screw systems, contact your local specialized dealer.
Tools Required
Tools required for assembly include a screwdriver ?, a spirit level ?, and a pencil ✏️.
Parts Included
- Mirror Frame
- 4x Screws (Part ID: 157433)
- 2x U-shaped brackets (Part ID: 10068734)
Wall mounting hardware (screws and appropriate wall anchors) are not included and must be purchased separately based on your wall type.
Assembly Steps
Prepare Mirror Frame
Lay the mirror frame flat on a soft surface to prevent scratching.
Attach two U-shaped brackets (Part ID: 10068734) to the back of the mirror frame using four screws (Part ID: 157433). Ensure the brackets are oriented correctly as shown in the diagram.
Mark Wall for Mounting
Determine the desired location for the mirror on the wall.
Hold the mirror against the wall at the desired height. Use a spirit level ? to ensure it is straight.
Using a pencil ✏️, mark the wall through the holes in the mirror frame where the wall mounting brackets will be attached.
Install Wall Mounting Brackets
Select appropriate screws and wall anchors for your wall type (not included).
Attach the wall mounting brackets to the wall at the marked locations using the selected screws and anchors. Ensure they are securely fastened. ❌ Incorrect screw type or placement may lead to failure.
Note: The maximum depth for screws into the wall mounting bracket is 7mm (9/32"). ?
Hang the Mirror
Carefully lift the mirror and hook the U-shaped brackets on the mirror frame onto the wall mounting brackets. ➡️
Ensure the mirror is securely seated. You may hear a 'CLICK!' sound when it is properly engaged. ℹ️
Verify the mirror is stable and properly secured to the wall.
