YILEIDE Battery Charger

Model: YILEIDE-E800W Seris

Specifications: (48V 15A) / (36V 18A)

Product Overview

A visual representation of the YILEIDE-E800W Seris Battery Charger shows a robust, rectangular device with a dark casing, a prominent silver handle on top, and ventilation grilles on the sides. The front features a green YILEIDE logo.

Thank you for purchasing the YILEIDE-E800W Seris Battery Charger. This is an economic, high-quality 100-240V AC balance charger designed specifically for charging golf cart lead-acid batteries.

The charging program operates in three distinct steps: constant current, constant voltage, and float charging. The charger is equipped with protections against overload, over-voltage, over-heating, short circuit, and reverse polarity connections.

Specifications

DC Output

Parameter Value
Maximum DC output voltage 58.8V / 44.1V
Nominal DC output voltage 48V / 36V
Maximum DC output current 15A / 18A (15A/18A @ 110 VAC; 15A/18A @ 220 VAC)
Maximum DC output power 800W
Battery type Lead-acid

AC Input

Parameter Value
AC input voltage range 85-260 VAC
Nominal AC input voltage 100-240 VAC
Nominal AC input frequency 50 / 60 Hz
Power factor >0.9

Mechanical and Environmental Specifications

Mechanical

Parameter Value
Dimensions 7.3 x 6.6 x 3.9 inch
Net Weight 3.7 lbs
Cooling Active cooling with fan

Environmental

Parameter Value
Enclosure Protection Level IP67
Humidity 5% – 95%
Operating temperature -20°C to +65°C (-4°F to 149°F), Derated at >40℃ (104°F)
Storage temperature -40°C to +85°C (-40°F to 185°F)

Explanation of LED Status

LED Indicator Charger Status
1. LED Yellow blinking 1. Charger AC cable is connected to the power supply. The charger is ready to charge.
2. LED Green blinking Slow 2. The charger is charging; Battery power 0-90%.
3. LED Green blinking Fast 3. The charger is charging; Battery power 90-100%.
4. LED solid green 4. Charging is complete.
5. Red light blinking quickly 5. Input power failure.
6. LED Red and green blinking alternately 6. The output is short-circuited or the positive and negative poles of the battery are reversed.
7. Red light blinks 2 times, interval 1 second, blinks 2 times again 7. Charger temperature overheating alarm.
8. Red light blinks 3 times, interval 1 second, and then blinks 3 times 8. Output over-current alarm.
9. Red light blinks 4 times, interval 1 second, then blinks 4 times 9. Output over-voltage alarm.

If there is a problem with the charger, the fan will stop rotating and the LED indicator will blink red light to give an error warning. Please disconnect the charger from the wall socket.

Warning and Safety Notes

This charger is suitable for charging golf carts Lead-acid batteries. Charging other battery types may cause fire or explosion.

Never leave the charger unattended when it is connected to its power supply. The allowable AC input voltage is 100-240V AC; never connect it to any other voltage.

Never place the charger and batteries connected to it on any form of flammable surface. Never operate the charger in the vicinity of inflammable material or gas.

Ensure that there is unrestricted airflow to and from the charger's cooling slots. Never place the charger on a carpet or similar surface.

Take great care to maintain correct battery polarity and avoid short circuits. Read the battery manufacturer's instructions and adhere to them strictly.

Important Warning

This is a smart charger. Using a non-original or old, defective receptacle will cause the charger to fail to charge. If the red LED indicator on the charger blinks, please replace it with a new, original receptacle.

The charging plug cannot be cut off to connect the battery directly; otherwise, the charger will not be able to charge.

PDF preview unavailable. Download the PDF instead.

YILEIDE-E8-800W-Manual-For-Amazon-products WPS 文字 macOS 版本13.2.1(版号22D68) Quartz PDFContext

Related Documents

Preview YILEIDE E1500W Series Battery Charger User Manual for Golf Carts
Comprehensive user manual for the YILEIDE E1500W Series 48V 15A / 36V 18A Battery Charger, designed for golf carts. Includes specifications, LED status explanations, and safety instructions.
Preview Yileide E8-JFBM-24V25A Lead Acid Battery Charger User Manual
User manual for the Yileide E8-JFBM-24V25A Lead Acid Battery Charger, detailing features, specifications, instructions, LED indicators, and safety warnings.
Preview Yileide 29.4V15A Lead Acid Battery Charger User Manual
User manual for the Yileide 29.4V15A Lead Acid Battery Charger. Provides instructions, specifications, LED status indicators, and essential safety warnings for operating the charger.
Preview Yileide E8-JFBU-30V25A Lithium Battery Charger User Manual
User manual for the Yileide E8-JFBU-30V25A Lithium Battery Charger. This intelligent 100-240Vac input balance charger is designed for 8S LiFePO4 batteries and features CAN BUS communication. It includes detailed specifications, operating instructions, LED indicator guide, and essential safety warnings.
Preview Yileide 29.2V25A LiFePO4 Battery Charger User Manual | Specifications & Safety
Comprehensive user manual for the Yileide 29.2V25A LiFePO4 Battery Charger. Includes detailed specifications, LED status indicators, and essential safety warnings for proper operation.
Preview Yileide E8-JFBP-28.8V25A Lithium Battery Charger User Manual
This manual provides detailed specifications, instructions, and safety guidelines for the Yileide E8-JFBP-28.8V25A Lithium Battery Charger, featuring a 5-step charging program and multiple protection features.
Preview Yileide Battery Charger CAN Bus Communication Specification
This document details the CAN bus communication protocol, message formats, and operational logic for Yileide battery chargers, including specifications for the Battery Management System (BMS), Motor Controller (MCU), and Charger Control System (CCS) based on CAN2.0b and J1939 standards.
Preview 充电机与 BMS 管理系统 Modbus 通讯规约及点表
本文件详细阐述了充电机与 BMS 管理系统之间的 Modbus RTU 通讯规约,涵盖了通讯协议的基本原理、报文格式、功能码、数据域、校验码计算方法,以及关键寄存器的定义。提供实际通讯示例,是集成和开发 BMS 充电系统的重要技术参考。