Yileide Battery Charger

Lithium Battery Charger

USERS MANUAL

(E8-JFBU-30V25A)

Thank you for purchasing our product. Please read the entire instruction strictly to use this charger.

FEATURES:

It is an economic, high quality, intelligent, 100-240Vac Input balance charger. Charging curve follows commands under the certain CAN BUS communication. The chargers provide protections against Over-load, Over-voltage, Over-current, Over-heating, Short-circuit, and Reversed polarity connections.

SPECIFICATIONS:

DC Output

Maximum DC output voltage	28.8 V
Maximum DC output current	25 A
Maximum DC output power	720 W
Nominal DC output current	23A @ 110Vac, 25A @ 220Vac
For Battery type	8S LiFePO4 Battery

AC Input

AC input voltage range	85-265 Vac
Nominal AC input voltage	100-240 Vac
Nominal AC input frequency	50 / 60 Hz
Maximum AC input current	10A @ 110Vac, 5A @ 220Vac
Nominal AC input current	7A @ 110Vac, 3.5A @ 220Vac
Power factor	>0.9

Mechanical

Dimensions	18.2 x 10.5 x 6.5 cm (7.16 x 4.13 x 2.55")
Weight	4 lbs (1.8 kg)
Cooling	Active cooling with fan

Environmental

Enclosure	IP66
Humidity	5% – 95%
Operating temperature	-20°C to 80°C (-10°F to 176°F), Derated at >60℃ (140°F)
Storage temperature	-40°C to 85°C (-40°F to 185°F)

INSTRUCTIONS:

Ensure the battery system follows the same CAN BUS communication protocol.
First, connect the charger DC wires and signal wires to the battery system correctly.
Then, connect the charger AC plug to a wall socket (100-240Vac).
The charger will start automatically if CAN BUS communication operates normally.
Ensure the charger is working well by checking the status of the LED indicator.
After charging is complete, please disconnect the charger AC plug and store it in a proper place.

LED INDICATOR:

LED Lights	Charger Status
Red light and green light blinks alternately	Load Error or charging is complete.
Yellow light blinks	Communication Timeout.
Green light blinks	Charging.
Steady green light	Charging is complete.
Red light blinks quickly	Input power failure.
Red-Red-Green blinks	Short-circuited or reversed connection.
Red light blinks 2 times, interval 1 second, then 2 times	Over-heating alarm.
Red light blinks 3 times, interval 1 second, then 3 times	Output over-current alarm.
Red light blinks 4 times, interval 1 second, then 4 times	Output over-voltage alarm.

If there is a problem with the charger, the fan will stop rotating and the LED indicator will blink red light to give an error warning. Please disconnect the charger from the wall socket. ?

WARNING AND SAFETY NOTES:

Never leave the charger unattended when it is connected to its power supply.
Never place the charger connected with batteries on any form of flammable surface.
Never operate the charger in the vicinity of inflammable material or gas.
Ensure that there is an unrestricted airflow to and from the charger's cooling slots. ?️
Never operate this charger if it has received any physical damage, been dropped, or received a sharp blow.
Do not disconnect the DC charging cord while the charger is operating. This can cause arcing and/or explosion. ⚡
Never charge a frozen or non-rechargeable battery as they may explode, causing injury, death, property damage, and/or fire. ?
To reduce risk of fire, do not use it near flammable materials or vapors. Always use the charger on a non-combustible surface (Metal, brick, concrete, etc).
Read the battery manufacturer's instructions and adhere to them strictly. ✔️

	Yileide E8-JFBP-28.8V25A Lithium Battery Charger User Manual This manual provides detailed specifications, instructions, and safety guidelines for the Yileide E8-JFBP-28.8V25A Lithium Battery Charger, featuring a 5-step charging program and multiple protection features.
	Yileide 29.2V25A LiFePO4 Battery Charger User Manual \| Specifications & Safety Comprehensive user manual for the Yileide 29.2V25A LiFePO4 Battery Charger. Includes detailed specifications, LED status indicators, and essential safety warnings for proper operation.
	YILEIDE E1500W Series Battery Charger User Manual for Golf Carts Comprehensive user manual for the YILEIDE E1500W Series 48V 15A / 36V 18A Battery Charger, designed for golf carts. Includes specifications, LED status explanations, and safety instructions.
	Yileide E8-JFBM-24V25A Lead Acid Battery Charger User Manual User manual for the Yileide E8-JFBM-24V25A Lead Acid Battery Charger, detailing features, specifications, instructions, LED indicators, and safety warnings.
	YILEIDE-E800W Seris Battery Charger User Manual User manual for the YILEIDE-E800W Seris Battery Charger, designed for charging golf cart lead-acid batteries. Provides detailed specifications, LED status explanations, and essential safety warnings.
	Yileide 29.4V15A Lead Acid Battery Charger User Manual User manual for the Yileide 29.4V15A Lead Acid Battery Charger. Provides instructions, specifications, LED status indicators, and essential safety warnings for operating the charger.
	Yileide Battery Charger CAN Bus Communication Specification This document details the CAN bus communication protocol, message formats, and operational logic for Yileide battery chargers, including specifications for the Battery Management System (BMS), Motor Controller (MCU), and Charger Control System (CCS) based on CAN2.0b and J1939 standards.
	充电机与 BMS 管理系统 Modbus 通讯规约及点表本文件详细阐述了充电机与 BMS 管理系统之间的 Modbus RTU 通讯规约，涵盖了通讯协议的基本原理、报文格式、功能码、数据域、校验码计算方法，以及关键寄存器的定义。提供实际通讯示例，是集成和开发 BMS 充电系统的重要技术参考。