eSID 03-06 Gen3 Installation Manual

Brand: Saab

Product: extended Saab Information Display (eSID)

Vehicle Compatibility: Saab 9-3 (MY2003-2006) with HPD (High Position Display)

Document Version: 1.0

Introduction

The eSID 03-06 Gen3 is the third generation of the eSID for Saab 9-3 vehicles (model years 2003-2006). This version is designed for simplified installation, typically completed in under 10 minutes without requiring any cable cutting or splicing. The eSID is installed behind the ICM (Information and Communication Module) unit.

The ICM unit exists in three different levels:

ICM1 – No Display
ICM2 – Monographic/Green Display
ICM3 – LCD/Color Display

The figure below illustrates the typical appearance of the ICM and SID (Saab Information Display) in a vehicle equipped with ICM3:

[Dashboard view showing SID, SIDC, and ICM3. The SID is located near the windscreen, displaying time and radio information. The SIDC is the control panel below the air vents. The ICM3 is a color display unit.]

The ICM unit reads switch statuses from the SIDC (SID Control) and manages the output to the SID.

eSID Components

The eSID system consists of one electronic control unit and an adapter harness.

[Image of the eSID electronic control unit and adapter harness. The control unit is a small black box with connectors and labels. The adapter harness has multiple colored wires and connectors.]

Installation Procedure

Follow these steps for a successful installation:

Step 1: Remove Center Ventilation

Refer to the Saab WIS (Workshop Instructions) or watch the following YouTube video for guidance on removing the center ventilation:

https://www.youtube.com/watch?v=9jR4k2kOQ6Q

[Image of the Saab 9-3 dashboard with the center air vents highlighted.]

Step 2: Remove ICM Screws

Locate and remove the two screws securing the ICM unit.

[Image showing the front of the ICM unit with two red arrows pointing to the screws that need to be removed.]

Step 3: Remove ICM Connector

Carefully disconnect the ICM connector from the unit.

[Image showing the back of the ICM unit with the connector circled in red.]

Step 4: Separate ICM Connector

Lift the plastic lock on the ICM connector and slide out the sub-connector. Be cautious not to damage the fiber optic cable during this process.

[Image 1: Close-up of the ICM connector with a red arrow indicating the plastic lock to be lifted. Image 2: The separated sub-connector and the main ICM connector.]

Step 5: Insulate Sub-connector

Apply electrical tape to the ICM sub-connector to prevent any short circuits.

[Image showing electrical tape being applied to the ICM sub-connector with a red arrow indicating the area.]

Step 6: Connect eSID to Harness

Connect the eSID unit to the adapter harness, ensuring the connector is oriented correctly.

[Image 1: The eSID unit with the adapter harness connector being attached, indicated by red arrows. Image 2: Close-up of the adapter harness connector, highlighting the correct orientation with a red arrow.]

Step 7: Connect Harness to ICM

Connect the adapter harness between the ICM connector and the sub-connector.

Note: The sub-connector has two larger pins. Ensure it is connected with the correct orientation; it will only fit one way. Do not force the connection.

[Image showing the adapter harness connected between the ICM unit and the car's wiring harness.]

Step 8: Re-attach Connector and Power On

Re-attach the ICM connector and turn on the ignition.

After the ICM self-check is complete, press and hold the INFO button on the SIDC panel to activate the eSID. The SID display will initially turn black and then the eSID functionality will be activated.

[Image of the eSID 03-06 Gen3 display showing "eSID 03-06 Gen3 SR1p0p2-4A23".]

Step 9: Reassemble

Remount the ICM screws and the center ventilation assembly.

Step 10: Enjoy

Your eSID installation is complete!

	2005 Saab 9-5 Owner's Manual Comprehensive owner's manual for the 2005 Saab 9-5, covering safety, driving, maintenance, and features. Includes details on engine variants and operational guides.
	Saab 9-5 Owner's Manual - Model Year 2008 The official owner's manual for the 2008 Saab 9-5. This guide provides comprehensive information on driving, safety, maintenance, controls, and features to help Saab owners get the most from their vehicle.
	2009 Saab 9-7X Owner's Manual: Comprehensive Guide to Features, Operation, and Safety Explore the 2009 Saab 9-7X Owner's Manual for detailed information on vehicle operation, safety features like airbags and seatbelts, instrument panel controls, climate systems, and maintenance guidelines. This guide is essential for understanding and operating your Saab 9-7X.
	2008 Saab 9-7X Owner's Manual This official owner's manual for the 2008 Saab 9-7X provides comprehensive guidance on vehicle operation, features, safety systems, and maintenance. Learn how to safely use your Saab 9-7X, understand its controls, and follow recommended maintenance schedules.
	SAAB V22.80 Diagnostics List: Comprehensive Vehicle Module Functions A detailed list of diagnostic functions available for SAAB vehicles with software version V22.80. Covers engine, chassis, and body modules, including specific functions like DTC reading/clearing, data stream, actuation, and special functions for various SAAB models and engine types.
	2009 Saab 9-5: Scandinavian Design, Turbo Performance, and Advanced Safety Discover the 2009 Saab 9-5, a comprehensive brochure highlighting its Scandinavian-inspired design, powerful turbo engine technology, advanced safety features, refined interior options, and versatile functionality. Explore the Sedan and SportCombi models, including innovative BioPower variants.
	Saab 9-2X Owner's Manual Comprehensive guide for operating, maintaining, and ensuring the safety of your Saab 9-2X. Covers vehicle features, controls, safety precautions, driving tips, and specifications for optimal performance and longevity.
	Saab 9-3 Model Year 2009 Owner's Manual Comprehensive owner's manual for the 2009 Saab 9-3, covering safety, security, instruments, interior features, driving, car care, customer assistance, and technical data. Includes detailed information on safety belts, airbags, and vehicle symbols.