Jewenwils Low Voltage Transformer

SKU: HOSL03C

[Instruction Manual]

Please pay attention to the warning signs. Read the instructions with caution before operating and keep it properly.

Warning:

All wiring and installation must be in accordance with local building and electrical codes. Always disconnect transformer from power source before performing work on lighting system. Calculate lighting capacity correctly - total load of fixtures may not exceed 60VA.

Disconnect from power source prior to opening the case.
Do not use the transformer with an extension cord.
Make sure all unused taps (leads) are separately insulated.
Do not install within 5ft of a pool or spa.
Do not exceed total fixture load of 60VA.

Product Layout

The transformer unit features mounting brackets at the top. It has a high voltage wiring compartment and a low voltage wiring compartment. A ground terminal and a circuit breaker are also visible.

Installation

Turn off the main circuit.
Remove the metal cover with a screwdriver (not included) and take out the mounting bracket, screws, and anchors inside.
Unscrew the top and bottom screws on the back of the transformer, install the mounting brackets, and tighten the screws again. Note: Pay attention to the correct direction of the two mounting brackets when installing.
Use screws and anchors to fix the transformer on the wall (at least 1ft above the ground), making sure that the wiring compartments are facing down.
Use electrical tape to connect the Black Wire and White Wire of the High Voltage Wiring Compartment with your live and neutral wires separately, then place these connected wires in the High Voltage Wiring Compartment.
Use the included wiring caps to connect the output line of the transformer with your load input line, then place the connected line in the Low Voltage Wiring Compartment. Note: (1) If the load has a ground wire, connect the ground wire to the Ground Terminal. (2) Do not remove the terminal block of the unused output line port, or it will cause a short circuit.
Turn on the main circuit.
Use a screwdriver to install the metal cover on the front of the transformer.

Circuit Breaker

If a circuit breaker occurs, immediately disconnect the transformer from the power source. Common causes for a circuit break are:

Low voltage wires are incorrectly connected to transformer output terminals.
Overload or short circuit (bare wires touching) occurs somewhere along the cable.
Fixtures are incorrectly installed along the cable.
Lamp load along a circuit exceeds 60VA.

Make all repairs to the lighting system before reconnecting the transformer to the power source. After the problem has been determined and solved, reset the breaker by flipping the Circuit Breaker.

Specifications

Model: HOSL03C
Input Voltage: 120VAC, 60Hz
Output: 12/13VAC
Max Power Rating: 60W

One Year Limited Warranty

Supported by our professional R&D team and QC team, Jewenwils provides a One Year Warranty for materials and workmanship from the purchase date. Please note that the warranty does not cover damage caused by personal misuse or improper installation.

Please attach your Order ID and Name so that our dedicated customer service team can help you better.

	Jewenwils Low Voltage Transformer HOSL07C Instruction Manual Instruction manual for the Jewenwils HOSL07C Low Voltage Transformer, covering installation, product layout, circuit breaker information, specifications, and warranty.
	Jewenwils Low Voltage Transformer HOSL08C Instruction Manual Instruction manual for the Jewenwils HOSL08C Low Voltage Transformer, detailing installation, operation, and specifications for landscape lighting.
	Jewenwils HOSL05E Low Voltage Transformer: Installation and Operation Guide Detailed instruction manual for the Jewenwils HOSL05E 300W outdoor low voltage transformer. Covers safety precautions, installation steps, operating modes (Auto, Countdown, Manual), cable selection, specifications, and warranty information.
	Jewenwils Wi-Fi Low Voltage Transformer HOSL05D2 Instruction Manual Comprehensive instruction manual for the Jewenwils Wi-Fi Low Voltage Transformer (Model HOSL05D2), covering setup, app connection, features like scheduling and timers, and installation guidelines.
	Jewenwils HOSL05A Low-Voltage Transformer Instruction Manual Instruction manual for the Jewenwils HOSL05A Low-Voltage Transformer, covering safety, installation, operation, troubleshooting, and specifications for outdoor landscape lighting systems.
	Jewenwils Wi-Fi Low Voltage Transformer HOSL04C2 Instruction Manual This manual provides detailed instructions for setting up and using the Jewenwils Wi-Fi Low Voltage Transformer (SKU: HOSL04C2). Learn how to connect to Wi-Fi, use the dewenwils app for control, set schedules, and understand installation guidelines.
	Jewenwils Wi-Fi Low Voltage Transformer (HOSL03B) - Installation and User Manual Comprehensive guide for the Jewenwils Wi-Fi Low Voltage Transformer (Model HOSL03B), covering setup, Wi-Fi connection, app usage, installation instructions, safety precautions, and specifications. Learn how to control your landscape lighting efficiently.
	Jewenwils Wi-Fi Low Voltage Transformer HOSL03B2 Instruction Manual This document provides instructions for setting up and using the Jewenwils Wi-Fi Low Voltage Transformer (SKU: HOSL03B2). It covers app installation, device connection via Wi-Fi, timer functions, and important safety and installation guidelines.