Jewenwils Low Voltage Transformer

SKU: HOSL08C

[Instruction Manual]

Please pay attention to the warning signs. Read the instructions with caution before operating and keep it properly.

Warning:

All wiring and installation must be in accordance with local building and electrical codes. Always disconnect transformer from power source before performing work on lighting system. Calculate lighting capacity correctly - total load of fixtures may not exceed 300w per zone, total 600w.

Disconnect from power source prior to opening the case.
Do not use the transformer with an extension cord.
Make sure all unused taps (leads) are separately insulated.
Do not install within 5 ft of a pool or spa.
Do not exceed total fixture load of 600VA. (300VA per zone)

Product Layout

Mounting brackets

Ground Terminal

High Voltage Wiring Compartment

Circuit Breaker

Low Voltage Wiring Compartment

Diagram Description: The product layout shows a transformer with two compartments. Mounting brackets are at the top. A ground terminal is visible. The high voltage wiring compartment and low voltage wiring compartment are labeled. A circuit breaker is also indicated.

Installation

Turn off the main circuit.
Remove the metal cover with a screwdriver (not included), and take out the mounting bracket, screws and anchors inside. [See Figure 1]
Unscrew the top and bottom screws on the back of the transformer, install the mounting brackets and tighten the screws again. Note: Pay attention to the right direction of the two mounting brackets when installing. [See Figure 2]
Use Screws and Anchors to fix the transformer on the wall (at least 1ft above the ground), making sure that the Wiring Compartments are facing down. [See Figure 3]
Use electrical tape to connect the Black Wire and White Wire of the High Voltage Wiring Compartment with your live and neutral wires separately, then place these connected wires in the High Voltage Wiring Compartment. [See Figure 4]
Use the included wiring caps to connect the output line of the transformer with your load input line, then place the connected line in the Low Voltage Wiring Compartment. [See Figure 5] Note: (1) If the load has a ground wire, connect the ground wire to the Ground Terminal. (2) Do not remove the terminal block of the unused output line port, or it will cause a short circuit.
Turn on the main circuit.
Use a screwdriver to install the metal cover on the front of the transformer. [See Figure 6]

Circuit Breaker

If a circuit breaker occurs, immediately disconnect the transformer from the power source. Common causes for a circuit break are:

Low voltage wires are incorrectly connected to transformer output terminals.
Overload or short circuit (bare wires touching) occurs somewhere along the cable.
Fixtures are incorrectly installed along the cable.
Lamp load along a circuit exceeds 300w per zone, total 600w.

Make all repairs to the lighting system before reconnecting the transformer to the power source. After the problem has been determined and solved, reset the breaker by flipping the Circuit Breaker.

Specifications

Model: HOSL08C
Input Voltage: 120VAC, 60Hz
Output: 12/13/14VAC
Max Power Rating: 300w per zone, total 600w

One Year Limited Warranty

Supported by our professional R&D team and QC team, we provide One Year Warranty for materials and workmanship from the purchase date. Please note that the warranty does not cover damage caused by personal misuse or improper installation.

Please attach your Order ID and Name so that our dedicated customer service team can help you better.

	Jewenwils Low Voltage Transformer HOSL07C Instruction Manual Instruction manual for the Jewenwils HOSL07C Low Voltage Transformer, covering installation, product layout, circuit breaker information, specifications, and warranty.
	Jewenwils Low Voltage Transformer HOSL03C Instruction Manual Instruction manual for the Jewenwils Low Voltage Transformer, model HOSL03C. Includes safety warnings, product layout, installation steps, circuit breaker information, specifications, and warranty details.
	Jewenwils HOSL05E Low Voltage Transformer: Installation and Operation Guide Detailed instruction manual for the Jewenwils HOSL05E 300W outdoor low voltage transformer. Covers safety precautions, installation steps, operating modes (Auto, Countdown, Manual), cable selection, specifications, and warranty information.
	Jewenwils HOSL05A Low-Voltage Transformer Instruction Manual Instruction manual for the Jewenwils HOSL05A Low-Voltage Transformer, covering safety, installation, operation, troubleshooting, and specifications for outdoor landscape lighting systems.
	Jewenwils Wi-Fi Low Voltage Transformer (HOSL03B) - Installation and User Manual Comprehensive guide for the Jewenwils Wi-Fi Low Voltage Transformer (Model HOSL03B), covering setup, Wi-Fi connection, app usage, installation instructions, safety precautions, and specifications. Learn how to control your landscape lighting efficiently.
	Jewenwils Wi-Fi Low Voltage Transformer HOSL05D2 Instruction Manual Comprehensive instruction manual for the Jewenwils Wi-Fi Low Voltage Transformer (Model HOSL05D2), covering setup, app connection, features like scheduling and timers, and installation guidelines.
	Jewenwils HWLT05A Low Voltage Transformer Instruction Manual Comprehensive instruction manual for the Jewenwils HWLT05A Low Voltage Transformer, covering setup, operation, safety precautions, and advanced features like Wi-Fi connectivity and app control.
	Jewenwils HOSL04A Low-Voltage Transformer: Installation and Operation Guide Comprehensive guide for the Jewenwils HOSL04A 200W low-voltage transformer, covering safety instructions, installation, operation modes (ON, AUTO, COUNTDOWN), troubleshooting, and cable selection for landscape lighting.