Kasa Smart Wi-Fi Outdoor Plug KP400 User Guide

Contents

• About This Guide
• Introduction
• Appearance
• Set Up Your Smart Outdoor Plug
• Main Device Controls
• Configure Your Smart Outdoor Plug
• Create Scenes
• Discover Kasa
• Authentication
• Compliance Information
• Safety Information
• Explanation of Symbols

About This Guide

This guide provides a brief introduction to the Kasa Smart Wi-Fi Outdoor Plug and the Kasa app, as well as regulatory information. Features may vary based on model, software version, location, language, and internet service provider. All images, parameters, and descriptions are for demonstration only.

Conventions

In this guide, the following conventions are used:

More Info

• Specifications can be found on the product page at https://www.tp-link.com.
• Technical Support and troubleshooting information can be found at https://www.tp-link.com/support.

Introduction

Extend your smart home to the outdoors with the weather-resistant smart outdoor plug. Control your patio lights, holiday decorations, and more from your smartphone. Turn each outlet on/off individually, set schedules, and use voice commands with Alexa, Google Assistant, or Microsoft Cortana to control connected devices.

• Double the Outlets: Control 2 outdoor devices independently from anywhere with one smart plug.
• Weather-resistant: Ideal for controlling patio lights, sprinklers, and other outdoor devices.
• Control from Anywhere: Turn outlets on/off or set schedules using the Kasa Smart app from anywhere.
• Voice Control: Use voice commands with Alexa, Google Assistant, or Microsoft Cortana.
• No Hub Required: Works with a secured 2.4GHz wireless network without a separate hub.
• Set Schedules: Individually schedule each connected device to automatically switch on/off at set times.

Supported Load Types

Appearance

This smart outdoor plug features two individual smart outlets, each with a control button and an LED indicator for status. The System LED changes color to indicate different statuses.

System LED Status

• Orange: Rebooting.
• Blinking Orange and Green: Setup mode initiated.
• Blinking Green: Searching for Wi-Fi.
• White: Connected to Wi-Fi network successfully.
• Blinking Orange: Resetting.
• Red: No Wi-Fi connection.

Components

• Smart Outlet x 2: Plug in your device and control it from your smartphone. Each outlet is independent.
• LED of Smart Outlet x 2: Lights up when the corresponding smart outlet is on.
• Control Button x 2: Press to turn the corresponding outlet on or off. Press and hold for 5 seconds to re-enable setup mode. Press and hold for 10 seconds to restore the smart outdoor plug to factory default settings.

Set Up Your Smart Outdoor Plug

Follow these steps to set up your smart outdoor plug using the Kasa Smart app:

1. 1. Download and Install Kasa App

   Go to Google Play or the Apple App Store, or scan the QR code below to download the Kasa app on your Android or iOS smartphone or tablet.

   [Scan QR code to download Kasa app]

   [Download on the App Store] | [Get it on Google Play]

2. 2. Log In or Sign Up with TP-Link ID

   Open the Kasa app. Use your TP-Link ID to log in. If you don't have a TP-Link ID, tap "Create Account" and the app will guide you through the process.

3. 3. Add Device

   Tap the '+' button in the Kasa app, select "Smart Outdoor Plug," and then follow the step-by-step app instructions to complete the setup.

Main Device Controls

After successfully setting up your smart outdoor plug, the Kasa app home page will display the status of all added devices. You can manage them from here. The plug has 2 smart outlets (e.g., HS107) which can be controlled individually.

Home Page View

The Home Page lists your connected devices, allowing you to see their status and access controls.

Device Status View

Tapping on a specific outlet or device opens its detailed status page, where you can control it, set schedules, timers, and more.

Configure Your Smart Outdoor Plug

On the Device Status page, you can configure various settings for your smart outlets:

Set Schedule

Tap the [Schedule icon] to set a schedule for your smart outlet, simplifying your daily routine by creating automatic On/Off actions.

Preset Away Mode

Tap the [Away Mode icon] to preset the Away Mode. Your smart outlet will be randomly turned on/off during the specified time to simulate occupancy.

Set Timer

Tap the [Timer icon] to set a timer. Your smart outlet will automatically turn on/off after the specified time ends.

Check Usage

Tap the [Usage icon] to view and track energy consumption of your connected devices.

Device Settings

Tap the [Settings icon] to view and change the settings of your smart outlet, such as renaming, setting icons, and enabling remote control.

Create Scenes

A scene is a preset group of smart devices that can be programmed, customized, and activated simultaneously with a single tap from your smartphone or tablet. Scenes allow you to easily set your mood, activity, or fit any special occasion, enabling your smart home devices to act automatically.

Discover Kasa

Use the Kasa app to pair your smart outdoor plug with Amazon Alexa, Google Home Assistant, or Microsoft Cortana for a hands-free experience. IFTTT support also allows for easy interaction between a wide range of products.

To set up integrations, launch the Kasa app and navigate to Add Device > WORKS WITH KASA, then select the desired service (e.g., Nest Home and Away, Amazon Alexa, Google Assistant, IFTTT) for detailed instructions.

Authentication

Copyright & Trademarks

Specifications are subject to change without notice. The [TP-Link Logo] is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders.

No part of these specifications may be reproduced in any form or by any means, or used to make any derivative work, without permission from TP-Link Technologies Co., Ltd. Copyright © 2018 TP-Link Technologies Co., Ltd. All rights reserved.

Compliance Information

FCC Compliance Information Statement

Product Name: Kasa Smart Wi-Fi Outdoor Plug

Model Number: KP400

Responsible Party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc.

Address: 145 South State College Blvd. Suite 400, Brea, CA 92821

Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6803

E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

"To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter."

TP-Link USA Corporation has determined that the equipment shown complies with applicable technical standards, FCC part 15. No unauthorized changes have been made to the equipment, and it is properly maintained and operated.

Issue Date: 2018-08-31

Canadian Compliance Statement

This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :

1. l'appareil ne doit pas produire de brouillage;
2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement.

Radiation Exposure Statement (IC)

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Déclaration d'exposition aux radiations (IC)

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

NCC Notice: Regulatory information provided in Chinese.

BSMI Notice: Safety advice and precautions provided in Chinese.

Safety Information

Please read and follow the safety information below when operating the device. TP-Link cannot guarantee that no accidents or damage will occur due to improper use. Use this product with care and at your own risk.

• Keep the device away from water, fire, humidity, or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use the device where wireless devices are not allowed.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• Operating Temperature: 0°C~40°C (32°F-104°F)
• Operating Humidity: 10%~90%RH, Non-condensing
• Storage Humidity: 5%~90%RH, Non-condensing
• For outdoor usage, use this product with a ground fault circuit interrupter (GFCI) outlet.
• Risk of electric shock. Do not open. No user-serviceable parts inside.
• Do not immerse into water.
• Refer servicing to qualified service personnel.

WARNING

• Timer could turn on unexpectedly without the user being present. To reduce this hazardous condition, unplug the appliance controlled by the timer before servicing.
• Risk of Electric Shock. Do not plug into another relocatable power tap or an extension cord.
• When plugged into a grounded 3-prong outlet, always ensure that the housing is facing downward and is at least 2 feet off the ground. Use the plug's mounting tag to hang from a screw to ensure correct orientation.
• DO NOT expose to heavy rain or immerse in water or any other liquid.
• DO NOT remove the ground pin (middle pin) or use with a 3-to-2 prong adapter.
• DO NOT use with devices that should not be operated unattended, such as power tools.
• DO NOT use in precision timing applications where inaccurate timing could be dangerous (e.g., sunlamps, saunas).
• Keep children away from the Smart Plug and outlet.
• No serviceable parts inside. DO NOT open or tamper with the unit.
• Do not discard the stopper; the plug should be covered when the socket is not in use.
• Remove the Smart Plug from the outlet before cleaning.
• DO NOT clean with liquid.
• DO NOT exceed the recommended electrical ratings.

Explanation of the Symbols on the Product Label